similar to: HBA port

All other patches from the sequence remain unchanged. Repost of patch 6 based on comments from Joey to follow. Mike

The following patches introduce support for multipath and cciss devices to the ovirt-node and node-image. Comments are appreciated. These patches assume that the 3 patches (2 node, 1 node-image) from Joey are all incorporated. Mike

findfs in F12 finds partitions on /dev/sdX devices instead of /dev/mapper/<wwid> devices. This sets an option that forces findfs to scan instead. Signed-off-by: Mike Burns <mburns at redhat.com> --- recipe/common-post.ks | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/recipe/common-post.ks b/recipe/common-post.ks index 9243751..0a2e180 100644 ---

I am attempting to get multipath working with device-mapper (CentOS 4.2 and 4.3). It works on EVERY install of mine from RH (also v4.2, 4.3), but the same multipath.conf imported to all my installs of CentOS do not work. Note that I have tested a working 4.2 configuration file from RH on CentOS 4.2 and a working 4.3 configuration (it changed slightly) on CentOS 4.3. Neither worked. Our production

Hello, mtx and therefor amanda use generic device /dev/sg<x> for tape changer. These devices change on reboot. How to make them persistent? /dev/sch0 and /dev/sch1 seem to be persistent. /dev/tape/by-id/ shows links from WWID to generic device An UDEV rule could help? I have not found any example. -- Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565

Gang, ???? I run several KVM host machines.? Due to updates, maintenance, and unexpected reboots sometime host machines are restarted.? I can easily envision a scenario where HostX needs some critical packages updated or is acting up.? I migrate guest0, guest1, guest2 etc. from HostX to HostY.? Then, in either a planned (i.e. scheduled maintenance) or unplanned (i.e. unplanned reboot) event

Greetings, I am trying to wrap my head around on this topic. Was wondering : Just as there is some scope for mapping ipv4 directly into IPV6 space, Is there a MAC ID or some kind of WWID has also been taken into consideration? Regards, Rajagopal

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi everyone, I am trying to get libvirt with qemu-kvm to work on my machines running openSUSE 13.1 / Tumbleweed. My question is in regard to using qemu+ssh, which would be my preference, as I already have a working ssh-key authentication with SSH-Agent. I set the permissions of the manage-socket to 0770, added my user to the libvirt group and set

Hi ! To all: A Happy New Year ! During the last week I did some investigations why the X11 forwarding on Reliant UNIX Versions 5.44 and 5.45 does not work out of the box with OpenSSH-2.3.0p1. The result fo my investigation is: 1. The OpenSSH sshd opens a TCP/IP-port 6000 + display number and listens to it. This is fine and works with Solaris 7, DEC-OSF 4.0D, Linux and FreeBSD-4.2 but not

Hello Ron, sounds good. I have 2 tape changer. I persume, udev creates the same link for both. Can I modify SYMLINK+="changer-$env{ID_SERIAL}" The serial should be unique. Viele Gr??e Helmut Drodofsky Internet XS Service GmbH He?br?hlstra?e 15 70565 Stuttgart Gesch?ftsf?hrung Helmut Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Fon: 0711 781941 0 <tel:+497117819410> Fax:

Hi, I want to share a partition of an external disk between 3 machines. It is located on a Sun StoreTek 3510 and bound (via multipathing) to all 3 machines. One machine (say mach1) is the node I used to create the filesystem and setup /etc/ocfs2/cluster.conf. I copied the file to the other 2 machines. All use the same /etc/multipath.conf[1], too. All start /etc/init.d/ocfs2 at boot, all are

Hi All, I created a new rails application using rails 1.0. I used "ruby script\generate scaffold" for each of my tables. This worked on all but 2 of my tables. When I go to the new or edit action of my requests or admins table, I get the error below. On one table called admins I hadn''t followed the correct naming convention and wasn''t able to edit or create

Hopefully someone can help get multipath working inside a domU. I'm using Xen 4.2.3 on a SLES 11 dom0, and both a SLES11 domU and a CentOS 6 domU. I'm using NPIV to connect my SAN disks to my domU, and, due to the way my SAN presents the LUNs, need to use multipath inside the domU. I've tried this on both SLES11 and CentOS6 with pretty much the same result. The root issue seems to

hi all We have a rh linux server connected to two HP SAN controllers, one an HSV200 (on the way out), the other an HSV400 (on the way in). (Via a Qlogic HBA). /etc/multipath.conf contains this : device { vendor "(COMPAQ|HP)" product "HSV1[01]1|HSV2[01]0|HSV300|HSV4[05]0" getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

hi, i have a host with a LSI SAS 3108 RAID controller in JBOD mode with 4 SSD SATA disks. i installed oVirt node (= CentOS 7) on the first two disks configured as SW RAID 1 (in the oVirt node/CentOS installer). when i look at the device names in the running OS i get # lsscsi --scsi_id -g [0:0:0:0] disk ATA SAMSUNG MZ7LM480 204Q /dev/sda - /dev/sg0 [0:0:1:0] disk ATA

Move all the dependencies with the same name in all the distributions to a single list at the end. There should be no change to the package list used to build the p2v ISO. --- p2v/dependencies.m4 | 72 ++++++++++++++++------------------------------------- 1 file changed, 21 insertions(+), 51 deletions(-) diff --git a/p2v/dependencies.m4 b/p2v/dependencies.m4 index 21541b4..e590f57 100644 ---

Hi, For some time now (starting with the 3.10 or 3.11 kernels, but I'm not sure) I have the following problem: I have a machine with 6 SATA slots and two SAS controllers, one onboard HBA and one RAID controller in a PCIe slot. The problem is that the order of the SAS controllers changes randomly after a reboot, so the SCSI addresses of the devices change. One time lsscsi prints (empty

Maybe one of you has experienced something like this before. I have a host running CentOS5.3, x86_64 version with the standard qla2xxx driver. Both ports are recognized and show output in dmesg but they never find my storage device: qla2xxx 0000:07:00.1: LIP reset occured (f700). qla2xxx 0000:07:00.1: LIP occured (f700). qla2xxx 0000:07:00.1: LIP reset occured (f7f7). qla2xxx 0000:07:00.0: LOOP

I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. Skickat från min iPad > 17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>: > > Hi Andreas, > >

On my machine I have SATA0: HD SATA1: HD these two drives are set as RAID1 SATA2: HD extra SATA3: DVD SATA4: external USB disk Snip from dmesg shows the ATAPI device being detected. ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PIONEER BD-ROM