similar to: cleartpart in kickstart on CentOS 6

Hi, I am struggling with kickstart. What I want to achieve is a reinstall, but some data partitions should survive the install, i.e. they should not be formatted. With a single disk this works, here is the relevant part from the kickstart file (I shortened the name of the volume group) ... zerombr clearpart --none --initlabel part /boot --fstype="xfs" --label=boot --onpart=vda1 part

I have 2 questions dealing with 2 different kickstart files. 1) my kickstart sections for RAID disk setup and kickstart reports it cannot find sda. Why is that. sda is there and works. clearpart --all --initlabel part raid.01 --asprimary --bytes-per-inode=4096 --fstype="raid" --onpart=sda1 --size=20000 part swap --asprimary --bytes-per-inode=4096 --fstype="swap"

Hi, I have a test system that booted fine using "Legacy Bios? mode and using the following Kickstart snippet configured the disks correctly:- # Clear the Master Boot Record zerombr # Partition clearing information clearpart --all --initlabel # Disk partitioning information part raid.01 --fstype="raid" --ondisk=sda --size=500 part raid.02 --fstype="raid" --grow

On Tue, 23 Aug 2016 at 02:18 Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 08/21/2016 11:56 PM, Phil Manuel wrote: > > part /boot/efi --fstype="efi" --size=200 --ondisk=sda > > And I have tried the latter with location as mbr still fails > > What am I missing ? > > > I very vaguely remember struggling with this as well, but I can't find

Does anyone know how anaconda partitioning enumerates disk partitions when specified in kickstart? I quickly browsed through the anaconda installer source on github but didn't see the relevant bits. I'm using the centOS 6.10 anaconda installer. Somehow I am ending up with my swap partition on sda1, /boot on sda2, and root on sda3. for $REASONS I want /boot to be the partition #1 (sda1)

I'm testing doing kickstart installations on Xen VMs. This is the first time I'm trying out kickstart at all, so I rather think I'm doing something wrong in the kickstart configuration than it is a Xen issue. I use a modified kickstart file from an earlier manual installation with a very basic filesystem setup. It fails with "SystemError: vgcreate failed for VolGroup00".

On Thu, August 4, 2016 7:13 pm, Paul Heinlein wrote: > On Thu, 4 Aug 2016, Valeri Galtsev wrote: > >> Dear Experts, >> >> Could somebody point to kicstart HOWTO specific for CentOS 7? >> >> On CentOS 7 I somehow am always given human intervention questions >> about drive which defeats unattended ks install. >> >> At least one snag I hit

hi, The problem: for kvm/qemu disks are /dev/vdx devices when using the virtio driver. For vmware, drives are /dev/sdx devices. For hp servers, /dev/ccisss/whatever (sorry, no proliant with an array controller handy to check it). in order to just have one kickstart script to maintain I am trying to use the %pre section but getting a bit stuck. This is what I have: %pre if [ -b /dev/sda ] then

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Anyone have any thoughts on why anaconda might be prompting me to reinitialize the disk during the kickstart of a Centos6.4 install on hyperV when a) the kickstart file contains "zerombr" as referred to in the installation guide[1] b) installation proceeds with no prompt on KVM hypervisors and succeeds? I have read the release notes[2]/tech

On Sun, 21 Aug 2016 at 12:51 Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 08/19/2016 11:35 PM, Phil Manuel wrote: > > The install fails under UEFi due to the fact the partitions are not > cleared, and it doesn?t have any space to continue. Is there an extra step > I need to do to remove the original partitions before the new layout will > work ? > > >

Hello. A couple of years ago I installed two file-servers using kickstart. The server has two 1TB sata disks with two software raid1 partitions as follows: # cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb4[1] sda4[0] 933448704 blocks [2/2] [UU] md0 : active raid1 sdb1[1] sda2[2](F) 40957568 blocks [2/1] [_U] Now the drives are starting to be failing and next week

Please help with a problem that is slowly driving me nuts :-/ *Quick problem* Can I kickstart an install by reading all the files from a single partition on the system and installing onto all the spare space on the same drive? I am using `harddrive --partition=sda1 --dir=/` but it doesn't seem to work!! *Longer version* I have a server that has no CD-ROM and that I would like to install a

I am trying to add an efi partition to my working kickstart file. bootloader --driveorder=sda --append="rhgb quiet biosdevname=0 net.ifnames=0" clearpart --all --initlabel part / --ondisk=sda --fstype xfs --size=20000 --asprimary part swap --ondisk=sda --size=4000 --asprimary part /boot/efi --ondisk=sda --fstype efi --size=1000 --asprimary part /home --ondisk=sda

This is what I have for configuring software raid on sata drives in my kickstart config <snip kickstart.cfg> clearpart --initlabel --all part swap --size=2048 --ondisk=sdb part swap --size=2048 --ondisk=sda part raid.01 --size=101 --ondisk=sda part raid.02 --size=101 --ondisk=sdb part raid.04 --size=1 --grow --ondisk=sdb part raid.03 --size=1 --grow --ondisk=sda raid / --fstype ext3

centos-virt, I'm trying to create/install domU guests all in "one" step, following Daniel's wiki page (I've found these pages really helpful, BTW): http://wiki.centos.org/HowTos/Xen/InstallingCentOSDomU I have a few questions about this process: (1) How would it be modified (w/respect to defining the disk in the domain configuration file) to use a disk layout where dom0

Hi All, I am having problems with a kickstart install of CentOS 8 When I try to do a completely automated install using PXE/UEFI it get to the point where it reads the kickstart config file. Then I see the following message "kickstart install Started cancel waiting for multipath siblings for nvme0n1" This is what I have in the kickstart file # Clear the Master Boot Record zerombr #

Hi Giuseppe... ! Thanks for the hint. ill try it. So from the docs, I'm seeing this: "As of Fedora 16 there must be a biosboot partition for the bootloader to be installed successfully onto a disk that contains a GPT/GUID partition table, which includes disks initialized by anaconda. This partition may be created with the kickstart option part biosboot --fstype=biosboot --size=1.

On Fri, Aug 26, 2016 at 10:39 AM, Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 08/25/2016 11:35 PM, Phil Manuel wrote: >> >> The relevant kickstart section is:- >> >> part /boot/efi --fstype efi --grow --maxsize=200 --size=20 --ondisk=sda >> bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=sda1 >> autopart

Hi, all. I'm trying to customize a CentOS installation cd, but got trouble with kickstart. I want to use dialog[1] for command line based user interface, but it can't display correctly in kickstart with CentOS 5.5. Same ks file works with CentOS 5.3 (both i386 and x86_64). What's the different between CentOS 5.3/5.5? I can't find it in release notes. And how can i fix it? Thanks

Hi. I'm currently trying to configure a kickstart script to do auto installs. We split up the partitions so that we have control on the mount security like setting no execute on the tmp portions etc . I keep hitting the same error : "Could not stat /dev/VolGroup00/LogVol_root --- No Such file or directory The device apparently does not exist; did you specify is correctly " Even