similar to: Bug in 6.0 i386 Basic server install...

Hi, I modified my kickstart to do some custom partioning and formating in a pre-install script. I am trying to align the partitions on the RAID stripe (and format with a correct stride). But, sfdisk complains that it does not start/end on a cylinder boundary (used -L option to limit complaining). Since the cylinder size is not a multiple of the stripe size, I cannot align on both. I tried to

Hi, I have a 'little' issue with my bootable USB keys... The following used to work (isolinux 3.11-4): Device Boot Start End Blocks Id System /dev/sdg1 * 1 3 23126 6 FAT16 /dev/sdg2 4 1023 7873380 83 Linux mkfs.vfat -n BOOT /dev/sdg1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdg2 syslinux -s /dev/sdg1 cd

Hi, I just received a new server (HP DL180G5) with 12x 1TB HDs and I bumped into fdisks 2TB limits... Since this is an entry level server, I can't use the classic HP bootable utilities to create smaller volumes et can only create a big RAID6. I found out that: using parted, labelling it gpt and creating the partitions would do the trick. But, what about grub? I read that it does not support

Hey, I solved my "The installation source given by device ['sdb2'] could not be found". Apparently ignoredisk is so strong it not only ignores the disks to be partitioned but also the disks holding the installation source... Now I ran into: ? In interactive step cleardiskssel, can't continue In anaconda.log I saw: ? step installtype does not exist ? step confirminstall

On Tuesday 04 February 2014 15:59:36 Richard W.M. Jones wrote: > On Tue, Feb 04, 2014 at 04:01:32PM +0100, Pino Toscano wrote: > > +static char * > > +extract_optionally_quoted (const char *value) > > +{ > > + size_t value_len = strlen (value); > > + > > + if (value_len >= 2 && > > + ((value[0] == '\'' &&

steps to reproduce: ./run guestfish -N disk:1536M <<EOF part-init /dev/sda mbr part-add /dev/sda p 1 1048577 part-add /dev/sda p 1048578 2097154 part-add /dev/sda p 2097155 -1 mkfs ext2 /dev/sda1 mkfs ext2 /dev/sda2 mkfs ext2 /dev/sda3 EOF qemu-img create -f raw test2.img 1520M ./run virt-resize --format raw --output-format raw --resize /dev/sda1=-2M --resize /dev/sda2=-8M --shrink

Hi, Now with the new libguestfs-1.27.55-1.1 I have this new issue : libguestfs: trace: is_file = 0 libguestfs: trace: is_file "/freedos/freedos.ico" libguestfs: trace: is_file = 0 libguestfs: trace: is_file "/boot/loader.rc" libguestfs: trace: is_file = 0 libguestfs: trace: umount_all libguestfs: trace: umount_all = 0 libguestfs: trace: vfs_type "/dev/sda2"

On Sat, Sep 27, 2014 at 10:44:42AM +0000, VONDRA Alain wrote: > Hi, > Now with the new libguestfs-1.27.55-1.1 I have this new issue : > > libguestfs: trace: is_file = 0 > libguestfs: trace: is_file "/freedos/freedos.ico" > libguestfs: trace: is_file = 0 > libguestfs: trace: is_file "/boot/loader.rc" > libguestfs: trace: is_file = 0 > libguestfs:

Hi, I have 2 identical xSeries 346 with 2 identical IBM 72GB scsi drive. What i did is install the centos 4.2 serverCD on the first IBM and set the HDD to raid1 and raid0 for swap. Now what i did is get the 2nd HDD in the 1st Server swap it with the 1st HDD in the 2nd Server and rebuild the Raids. The 1st server rebuild the array fine. My problem is the Second server, after rebuilding it and

I now how to expand a LVM by creating a new drive as described here: http://lists.centos.org/pipermail/centos/2007-February/032664.html, the steps are: # pvcreate /dev/sda3 # vgextend VolGroup00 /dev/sda3 Now, I want to know how to expand a LVM without create /dev/sda3? Suppose I have 2 GB free (unpartitioned) and LVM use /dev/sda2 (8 GB). How to make /dev/sda2 become 10 GB? Then resize LVM

Hi, I am experiencing a failure running virt-v2v to convert a Linux guest on an ESX host to a RedHat KVM hypervisor. The output with the failure follows. Any help/guidance is appreciated. [root at storage-024 ~]# virt-v2v -ic esx://<ip address>/?no_verify=1 -op transferimages --bridge br0 dev-03 > /tmp/virt-v2v.output error from Term::ReadKey::GetTerminalSize(): Unable to get

Hi, I am trying to convert a Windows 2008 version, and I have libguestfs-winsupport-7.1-3.el7.x86_64 installed. Regards Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -----Message d'origine----- De : Richard W.M. Jones [mailto:rjones@redhat.com]

Hi. I have cloned a RHEL 5.6 physical server over to a ESXi 5.0 Virtual Machine. Using a live CD on the new Virtual Machine I created 3 partition /boot (/dev/sda1), / (/dev/sda2) and swap (/dev/sda3), I then mounted the / (sda2) partition and created the /boot directory and mount the boot partition partition /dev/sda1 into /boot. I then used rsync to copy the source machine over to the Virtual

On 04/30/2015 06:51 PM, Chen, Hanxiao wrote: > Hi, Rich > >> -----Original Message----- >> From: Richard W.M. Jones [mailto:rjones@redhat.com] >> Sent: Wednesday, April 29, 2015 7:04 PM >> To: Chen, Hanxiao/陈 晗霄 >> Cc: libguestfs@redhat.com >> Subject: Re: [Libguestfs] [PATCH 00/10] virt-resize: add support for resizing MBR >> logical partitions

Hello, I have two disks sda and sdb. One of the was broken so I have changed the broken disk with a working one. I started the server in rescue mode, and created the partional table, and added all the partitions to the software raid. *I have added the partitions to the RAID, and reboot.* # mdadm /dev/md0 --add /dev/sdb1 # mdadm /dev/md1 --add /dev/sdb2 # mdadm /dev/md2 --add /dev/sdb3 # mdadm

Greetings - Ok, I have my CentOS 7 KVM host system installed and I want to be able to boot the system from either installed drive if one of them fails. My objective is to have the following layout for the two 3 TB disks. sda1 /boot/efi sda2 /boot sda3 RAID1 with sdb3 sdb1 /boot/efi sdb2 /boot sdb3 RAID1 with sda3 The system is installed and boots from sda[1,2] and md127 (sda3 and

Hello, I have a GridEngine setup with 5 subnodes and two RAIDS attached. I backed up the OS drive - 120GB - to an external hard drive - 500GB - using ddrescue. The OS drive is partitioned as: sda1 has the OS and is about 7 GB sda2 has /var and is about 4 GB sda3 has swap and is about 1 GB After backing up, there were 4KB of errors, but all at the end of the disk around 118GB. This used to be

On Thu, Jun 7, 2012 at 6:43 PM, John Doe <jdmls at yahoo.com> wrote: > From: Aft nix <aftnix at gmail.com> > >> On Thu, Jun 7, 2012 at 5:53 PM, John Doe <jdmls at yahoo.com> wrote: >>> ?From: Aft nix <aftnix at gmail.com> >>> >>>> ?I'm developing some kernel module, so i need a stand alone qemu to >>>> ?test my

Hi, I am currently using keyboardcast but I had to modify the sources to make it behave "properly" (light, auto-placed, auto-tiled windows, etc) and... I lost my modifications and do not want to recode it once more... :/ I wanted to use mssh (not the python one, the one from Bradley Smith) but I cannot find an rpm and cannot compile it on CentOS 5 due to a too old vte-devel library

As I understand anaconda uses parted to partition (starting from centos 6), using this as example (kickstart configuration file): clearpart --all --drives=sda --initlabel part /boot --asprimary --size=200 --fstype=ext2 --ondisk=sda part swap --asprimary --size=16384 --fstype=swap --ondisk=sda part / --asprimary --size=512000 --fstype=ext4 --ondisk=sda part /scratch --asprimary --size=1 --grow