similar to: how do determine last file system on disk?

I have trouble finding definitive information about this. I am considering the use of SME 7.5.1 (centOS based) for my server needs, but I do want to use ZFS and I thus far I have only found information about the ZFS-Fuse implementation and unclear hints that there is another way. Phoronix reported that http://kqinfotech.com/ would release some form of ZFS for the kernel but I have found nothing.

https://bugzilla.mindrot.org/show_bug.cgi?id=1477 Summary: ssh-keygen not reading stdin as expected Classification: Unclassified Product: Portable OpenSSH Version: 4.7p1 Platform: ix86 OS/Version: OpenBSD Status: NEW Severity: normal Priority: P2 Component: ssh-keygen AssignedTo:

I would like to have a smart cli tool, that shows a comprehensive list about the local storage structure: An output like: /srv /dev/mapper/luks-f85b7a2c-...: UUID="ca924fad-..." TYPE="ext4" /dev/mapper/vg_internal_e-lv_internal_srv: UUID="f85b7a2c-..." TYPE="crypto_LUKS" vg_internal_e /dev/md3: UUID="1Fi2Ex-..."

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following message: ----------------------------- Applying

Hello to all, I have a question, maybe it's a very newbie question. I've installed CentOS 6.4 on my notebook but sometimes when I boot it, after the screen "booting CentOS in 4..3..2..1" I receive a black screen and not the logo of CentOS with loading progress. Is it normal? There are some know issue about it? Best regards, Fabrizio -- "The intuitive mind is a sacred

Hello to all, I'm currently studying (and collecting notes here https://github.com/fdicarlo/RHCSA_cs) for RHCSA. My plan is to RHCSA -> RHCE and then RHCSS. What I want to ask you is: - What do you think about it? - Did you find it useful? - Do you have any advices? Best regards, Fabrizio -- "The intuitive mind is a sacred gift and the rational mind is a faithful servant. We have

When virtio-blk device is resized from host (using block_resize from QEMU) emit KOBJ_CHANGE uevent to notify guest about such change. This allows user to have custom udev rules which would take whatever action if such event occurs. As a proof of concept I've created simple udev rule that automatically resize filesystem on virtio-blk device. ACTION=="change", KERNEL=="vd*",

When virtio-blk device is resized from host (using block_resize from QEMU) emit KOBJ_CHANGE uevent to notify guest about such change. This allows user to have custom udev rules which would take whatever action if such event occurs. As a proof of concept I've created simple udev rule that automatically resize filesystem on virtio-blk device. ACTION=="change", KERNEL=="vd*",

Hello to all, I've a frustrating issue, everytime I'm trying to connect to some website (like Linkedin, VMware, CertCollection, etc etc) I have issue with credentials... Or the website didn't recognize my login (and I'm still in login page) or for example I'm logged in linkedin but I'm not able to see which visit my profile cause it ask me my credentials and when I enter

Hi all, I need a periodic timer running at ideally at 125 microseconds and at least 500 microseconds. I''ve just found the VCPUOP_set_periodic_timer, however there is a comment saying "periods less than one millisecond may not be supported". I will be running on an x64 machine. Is this supported? If not, is there any alternate means of generating a fast interrupt? Regards.

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Hello, My host just had a faulty power supply and therefore, my Asterisk server was down for 7 hours. It was a Sunday so no one was making calls, however if it happened during the week, I'd have problems. I was trying to find a whitepaper or advice on how to set up two Asterisk servers to provide some redundancy. I've been googling "asterisk redundancy" but all I've found

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hello all, I have a DL360 G4 1U server that does a wonderfull job with dovecot horde, Xmail and OpenLDAP for a company and serving about 40 acouunts. The machine is wonderful. I am very happy with it. However, I am running out of disk space. It has two times 76Gb Drives in RAID1 (disk mirroring) and the capacity has reached 82%.? I am starting of getting nervous. Does anyone know of a painless

Guys, I'll be building a couple of DL360 G4p & DL380 G4 boxes soon and I've not dealt extensively (i.e. at all) with any PC stuff that hasn't been i386. I know the DL line pretty well but it was all G2/3. So, question is, do I stick CentOS i386 or x86_64 on them? 2 boxes x 2GB RAM and 1 x 4GB, all SMP. Will.

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

I have purchased a used Compaq DL360 which I was going to use as a proxy server. Presently, we are using a cheap box with ipcop which is working fine but it didn't have much RAM (64MB), etc. This new box we will want to run squid and perhaps dansguardian for filtering (this is a non-profit company) and I'm wondering if I should just put ipcop on it or would it be smarter/better to install

We have a python script that is currently run from cron. We want to make it into a service so it can be controlled with service start/stop/restart. Can anyone point me at site that has instructions on how to do this? I've googled but haven't found anything.

Hi All. Yesterday I was installing Centos 5.5 to my web server, and it looks like the main hard drive has gone AWOL. Fedora 12 put the file system into r/o mode. The drive is an Hitachi, still under warranty. There are bad sectors on it, and running the Hitachi DFT tool confirms this. Also I cannot repair the bad sectors. Would this be caused by a faulty I/O chip, or is it safe to say