similar to: 1U firewall hardware

I only have some experience with OPNsense but maybe you can relate: - In my case it was always the certificate.? - I had to add the cert to the system certs using CLI. Adding them in the WebGUI was not enough. - Port 636 did not work for me, only 389 using STARTTLS Hope that helps... On 16. March 2020 at 08:13:50, Stefan G. Weichinger via samba (samba at lists.samba.org) wrote: Am 15.03.20 um

Does anyone recommend any particular SAS controller, or should I use an Ultra-320 SCSI controller instead? My machine is an IBM xSeries 306m. It has a SAS controller provided on a daughter card, but it''s not supported in the 2.6.16 kernel, so I''m looking for a separate disk controller card that will work with my existing SAS disks. -- James Holmes Programmer/SysAdmin RTDS

Hi I cant start a hvm domU with more than 3 nic's configured... why? it is a bug? With previous versions it was possible... here the config - it is an opnsense (openbsd) hvm domU: name = "fenrir.chao5.int" uuid = "7aedcd03-54e8-4055-8d1b-37dd34194859" maxmem = 2048 memory = 2048 loader = '/usr/lib64/xen/boot/hvmloader' type = "hvm" vcpus = 2

Hello Andrew, A gentle reminder for the patch. Can you share the patch as you mentioned? -- Thanks & Regards, Anantha Raghava Do not print this e-mail unless required. Save Paper & trees. On 29/10/17 11:57 AM, Andrew Bartlett wrote: > On Sun, 2017-10-29 at 09:11 +0530, Anantha Raghava wrote: >> Hi, >> >> I did upgrade the server to Windows Server 2008 R2

Hi Alexander, I'm terribly sorry. We didnt have the "ntlm auth" parameter configured on the DCs at all. I added it and it just works. Thanks for your help. Now I just need to figure out how I can make WLAN-specific LDAP-Group authentication. e. g. production WLAN needs LDAP group "wlan_production" and management WLAN needs the "wlan_management" group. I

On 9/22/20 2:14 PM, Gregory Sloop via samba wrote > As an old sage (curmudgeon if you like) I'd encourage people to really consider if the Pi is really what you want. > For me, it's not - even though it's a totally cool device conceptually. They're a ton of fun to tinker with too. I am also an old guy and didn't want to use the Rpi for this purpose. However, many years

Hi Matthias, we?re using Debian Bullseye with the backports repo. So version is a mixture of - Samba version 4.17.3-Debian - Samba version 4.17.7-Debian We?ve installed it directly on the DC?s as well. In my opinion using "ntlm auth = yes? should be fine. Did you try using a simple RADIUS secret? In my experience long secrets or ones containing special characters don?t work very well. I

Hi Anantha, > The upgrade from 4.6.5 broke all the servers. Although the services were > running and there is no error message, DNS resolution failed. Even from > inside the domain controllers, DNS queries failed. > > Samba Version 4.7.1 and Named Version 9.9.4. The same issue happened > with samba version 4.7.3 and 4.7.4 > > We had to revert back to 4.6.5 to bring the

Hello everyone, I am trying to tweak some of the sysctl tunables for the ix (ixgbe) driver in FreeBSD 9.2 since I am experiencing less than ideal performance and it seems like I can't find any: # sysctl -a | grep -i ixgbe device ixgbe I am running 9.2-RC4. Any input appreciated. Thanks, -- Rumen Telbizov Unix Systems Administrator <http://telbizov.com>

Am 16.03.20 um 09:02 schrieb Alexander Harm via samba: > > I only have some experience with OPNsense but maybe you can relate: > > - In my case it was always the certificate.? > - I had to add the cert to the system certs using CLI. Adding them in the WebGUI was not enough. > - Port 636 did not work for me, only 389 using STARTTLS > > Hope that helps... Ah, yes, thanks.

Hello Alexander, thanks Alexander for these configuration snippets. Which version of Samba are you using? Is this on debian bullseye? Is the FreeRADIUS server installed on a DC or on a Domain Member? (I just tested the latter). is "ntlm auth = yes" OK for the DCs and the domain member or does it have to be "mschapv2-and-ntlmv2-only" for all servers (DCs + Member)? It

I'm not sure if anyone has done this before or not but, I was able get the Cisco IP Communicator soft phone to work with Asterisk using SIP. Thought I would share my experiences. The key is on the installation. To have the software use the SIP protocol type the following command: "msiexec /i CiscoIPCommunicatorSetup.msi /qb SIP=1". After installation configuration is just like

Hi I cant start a hvm domU with more than 3 nic's configured... why? it is a bug? With previous versions it was possible... here the config - it is an opnsense (openbsd) hvm domU: name = "fenrir.chao5.int" uuid = "7aedcd03-54e8-4055-8d1b-37dd34194859" maxmem = 2048 memory = 2048 loader = '/usr/lib64/xen/boot/hvmloader' type = "hvm" vcpus = 2

It seems to be a problem with kernel... I use the kernel-ml there (5.5.6)... with kernel from centos-virt repo (4.9.*) it works without this problem... --- ------ Greetz Am 27.02.2020 07:50, schrieb Christoph: > Hi > > I cant start a hvm domU with more than 3 nic's configured... why? it is > a bug? > With previous versions it was possible... > > here the config - it is

Everybody, In my case I used a RPi as an additional DC for a month or so while making some Samba4 AD improvements to the main DC's. My main DC's run on some nanopc Intel J1800 (cpu) based fanless (about 5" x 5" x 2") box's that by spec sheet draws a maximum of 15W to run on full load. As a DC they never run on full load. These boxes are actually designed to be run 24/7

Does anyone has any experience with this server i wonder i it supports iommu. _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Just an FYI on a great server for cheap if anyone is looking for a solid Asterisk platform. I don't work for these guys or have any affiliation, I just saw this deal and used to use these and the X306s for Asterisk deployments because they were trouble free as far as hardware, IRQs, and OS. They were ~$1,000 a couple of years ago. It is a refurb so YMMV.

Bristuff has been updated; http://www.junghanns.net/downloads/bristuff-0.3.0-PRE-1u.tar.gz -- Vidar

I was wondering if there is anyone following the list that has this or similar PCI cards running in a 1U server. If so, could you possibly recommend a PCI card bus adapter? I'm not sure exactly which kind I'll need. I plan on researching the different types of adapters I can purchase for my specific mobo (Supermicro X9SCA-F), but I'd like to not waste time by ordering an incorrect

On Wed, 12 Aug 2020 21:46:19 +0800 Turritopsis Dohrnii Teo En Ming <ceo at teo-en-ming.com> wrote: > Subject: [Sharing] CentOS 8.2 (2004) Linux Server is Compatible with > Dell PowerEdge R640 1U Server This server should be fully ok to run RHEL8 and CentOS8. What exactly goes wrong? https://access.redhat.com/ecosystem/hardware/2941651 /Peter K > Good day from Singapore, >