similar to: PCI-X/PCIe RAID controller.

I'm having speed problems with the SCSI card we're using to do tape backup. It seems to be functioning in 16 bit mode and the current thinking is that perhaps it's using a legacy driver instead of the correct one. The Adaptec site has a 'driver' for RHEL5 which I've downloaded and tried to install but it seems to have a problem installing on a CentOS-5 system. [root at

From: Tony Wicks <tonyw at tonyw.com> > I run Centos on Compaq dl380g1/2/3's and Dell servers. While the > Compaqs are strong hardware they are old and frankly the performance > compared to modern (cheap or otherwise) hardware is not really that > impressive. A dual 1 gig P3 dl380 and ultra 3 scsi drives get significantly > out performed by a generic celeron with software

Hello, Is the dell perc 4dc raid card supported by centos 4 and does it work reliably? thanks Jon

I've got two drives from a now-dead server, they were RAIDed, a mirror, I'd assume. I need to see if there's anything on them I need to transfer to the replacement, so I just shoved them into another Dell server, with a PERC 5 controller - I think that's what the dead one had. I fired up MegaRAID storage manager... but can't see any way to tell it to recreate that RAID. Anyone

Greetings all- I need to purchase a PCIe SATA or SAS controller(non-raid) for a Supermicro 2U system. It should be directly bootable. Any recommendations? The system will be running CentOS 5.4 as an LTSP system. Thanks! --Tim

I have a fleet of 2970s and we are upgrading the hardrives on the motherboard SATA ports (A/B not the PERC backplane) when a "detecting hardware" is performed the system crashes, reboots and gives an E1422 error code (useless video: https://www.youtube.com/watch?v=PhyMeUHJar4). We narrowed it down to a motherboard BIOS issue, if we remove the SSD or add noprobe to the kernel the

With the Dell OpenManage question on my mind (and having seen it answered very well), I was reminded of an interesting and a little surprising thing I saw yesterday. I upgraded a PowerEdge 2850 from CentOS4 to Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal

Hello, What is the maximum number of simultaneous calls supported by asterisk. thks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090703/0794c554/attachment.htm

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 11:19:38 -0700 On 4/29/2017 10:49 AM, Gregory P. Ennis wrote: > I am remote from the unit today, and do not have a good way to look at > the board today, but the

-----Original Message-----From: John R Pierce <pierce at hogranch.com> Reply-to: CentOS mailing list <centos at centos.org> To: centos at centos.org Subject: Re: [CentOS] SCSI drives and Centos 7 Date: Sat, 29 Apr 2017 13:31:11 -0700 On 4/29/2017 12:42 PM, Gregory P. Ennis wrote: > what does `lspci` have to say about this raid card ? > > John, > > Thanks for the prompt

Oracle have deleted the best ZFS platform I know, the X4540. Does anyone know of an equivalent system? None of the current Oracle/Sun offerings come close. -- Ian.

Dear all Sorry if it''s kind of off-topic for the list but after talking to lots of vendors I''m running out of ideas... We are looking for JBOD systems which (1) hold 20+ 3.3" SATA drives (2) are rack mountable (3) have all the nive hot-swap stuff (4) allow 2 hosts to connect via SAS (4+ lines per host) and see all available drives as disks, no RAID volume. In a

Hi David, Thank for very much for your reply! I got a reply on the clang mailing list in April from Dmitri: http://lists.llvm.org/pipermail/cfe-dev/2020-April/065115.html and following his advice “attaching pragmas as attributes to functions” I managed to do it, it was actually quite easy. >>Compatibility with an existing compiler is usually compelling - are the compilers you're

Hi, we are currently working on getting windows working on your xen servers. but we are facing a severe problem where dom0 and all domus hang for 1-5 seconds from time to time. we think it is probably because of disk i/o, because top sometimes says 100% wa (waiting on io) during the hang. dom0 has cpu 0 for exclusive use and the windows vms use cpu 1 to 7. should we give dom0 more than once

Hi people I am new to Xen and having some trouble getting it up and running. I am trying to install it on a Dell Poweredge SC420 that has CentOS (RHEL3 clone) installed. The error that I am getting when I first try to boot into the Xen kernel, after having installed the binary and adding the necessary lines to grub.conf is : ---snip--- md: Autodetecting RAID arrays md: autorun ... md: ...

Future AMD SVM supports a new feature called flush by ASID. The idea is to allow CPU to flush TLBs associated with the ASID assigned to guest VM. So hypervisor doesn''t have to reassign a new ASID in order to flush guest''s VCPU. Please review it. Thanks, Wei Signed-off-by: Wei Huang <wei.huang2@amd.com> Signed-off-by: Wei Wang <wei.wang2@amd.com> -- Advanced Micro

Dear Experts, I have a data object named "data.char". When I use cbind(data.char) in SPlus, I got the following results: > cbind(data.char) data.char data matrix, 2700 excluded list, 3 cluster.var character, 2 strata list, 3 xlog CT link logit gpcorr 1 missing.row numeric, 0 zero.row numeric, 22 infile perc.csv attr(,

This is probably a hardware problem but I am posting here in case anyone else has seen it or it is actually software. If you have seen anything like it please let me know. Chuck For the last 1.5 years I have had occasional problems on a large (6.8 TB) Samba server. Two of the mounted filesystems will partially dismount at intervals between 3 days and 3 months. Files will still be open but any

Hi! On z/OS, there is the need to convert strings from EBCDIC to UTF-8 and vice versa. Using the POSIX iconv functions has some challenges, so I created a small wrapper around this functionality to get the same result on all platforms. This functionality is required for reading and writing GOFF object files and can also be used in the frontend. I put up the code on Phabricator

Hello all, For the past couple of months I've been writing a new llvm backend for Renesas RL78 MCU: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rl78.html The software manual which contains all there is to know about RL78 is available here: https://www.renesas.com/us/en/doc/products/mpumcu/doc/rl78/r01us0015ej0220_rl78.pdf The motivation behind this is the