similar to: 3.5 kernel panic on boot

Hi, Im trying to set create a RHAS4 DomU on a HP proliant 360DL 4 processor SMP. Since the xenified kernel that came with FC4 didnt work, I compiled a xen-unstable enabled kernel for FC4. all was fine untill it gave me a ''unable to open an initial console'' I tried to make an initrd for my xen0 kern but it didnt work. So I tried using the old initrd image that I had and Dom0

This may or may not be ext3 related but I am trying to find any pointers which might help me. I got a number of HP Proliant DL380 g5 with a P400 controller and also two qla2400 cards. The OS is RedHat EL4 U5 x86_64. Every time during reboot these systems panic after the last umount and I believe before the cciss driver is getting unloaded. The last messages I am able to see are: md: stopping

Hi In our office environment few servers mostly database servers and yesterday it happened for one application server(first time) the partion is getting "read only". I was checking the archives, found may be similar kind of issues in the 2007-July archives. But how it has been solved if someone describes me that will be really helpful. In our case, just at the problem started found

All, We are encountering spurious errors with ext3. After some period of heavy IO we may see messages similiar to: EXT3-fs error (device cciss/c0d0p5) in start_transaction: Journal has aborted When this happens the filesystem is remounted read-only. If it's the root filesystem the system becomes unresponsive and must be rebooted. An fsck on the affected filesystem shows lots of corruption.

Hello all, I''m trying to pass my PCI device through to an HVM. I''m following the steps on the xen pci passthrough wiki. First I check my pci devices #lspci - 03:00.0 VGA compatible controller: ATI Technologies Inc Device 671d 03:00.1 Audio device: ATI Technologies Inc Device aa80 04:00.0 Display controller: ATI Technologies Inc Device 671d 04:00.1 Audio device: ATI

I have xen 3.04 running on SLES10SP1. It''s working great, but I''m wondering if I have some memory issues with dom0. I have 7 domU''s, 1 is win2k, the other 6 are win2k3. I''ve had a lot of machines up and down with a reboot of dom0 in quite a while. I''m wondering if dom0 has not given up memory during the process. I added 5 win2k3 domU''s today.

I've been seeing some random Proliant DL380 G4 64bit crashes. Each time, on the console are messages relating tojbd2/cciss and something about a waitfor 120 seconds. Is anybody else seeing anything like this? Oddly, I can't seem to find this in the logs. I guess it can't write when this happens. -- John Hinton 877-777-1407 ext 502 http://www.ew3d.com Comprehensive Online

Dear ALL, I have encountered an issue while installing xen4.1.2 from source. No problem encountered while xen installation.While booting towards XEN kernel, i encountered the folowing error ******************** setuproot: moving /dev failed : No such file or directory no fstab,sys mounting internal defaults setuproot: error mounting /proc setuproot: error mounting /sys Kernel

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

Hi, I've gone through the source tree and I don't see a MIB description file for the SNMP agent in asterisk. can someone point me to it. Thanks, Bruce ferrell

Hi Greg, Really, the first step to install filesystem it with support ACL. It looks at my archive: LABEL=/ / ext3 defaults,acl 1 1 LABEL=/boot /boot ext3 defaults 1 2 LABEL=/data /data ext3 defaults,acl 1 2 none /dev/pts devpts gid=5,mode=620

Hi. I am trying to boot Xen 2.0.5 on an HP DL380 G3. It won''t. The box has an "HP Smart Array 5i" that when running normal Linux is handled by the CCISS driver. I suspect that this is what is not supported in the stock Xen kernel. Am I correct that I need to build a kernel from source ? According to http://lists.xensource.com/archives/html/xen-devel/2004-11/msg00709.html there

Hello, I''m doing one emergencial migrate for one very old machine, because we will have one IMPLOSION (!!!) very close from here, and I''m thinking that this old IDE disk will not survive... :-/ [root@registro-2 /root]# df -h Filesystem Size Used Avail Use% Mounted on /dev/ida/c0d0p2 3.8G 2.3G 1.4G 62% / /dev/ida/c0d0p8 26G 20G 4.4G 82% /data

Thank you for the prompt reply. What you said is promising so if I may, with your help can we decipher what SYSLinux files goes where from the ground up? If this is too broad a question or may take up too much of your time then I understand and appreciate your help thus far. Richard -----Original Message----- From: Bruce Ferrell [mailto:bferrell at baywinds.org] Sent: Saturday, 17 November 2018

Hi Bruce Thank you very much for reaching out. This is likely to be a short discussion due to me potentially learning that my infrastructure possibly has shortfalls that I did not appreciate until just recently. What I was hoping to do is deploy Windows from a Thecus branded NAS. Natively the NAS does not support PXE, but with community created mods it is achievable. So with this mod

I'm trying to make an AMI call. I want to call a number, play an announcement when the call is answered, then call a second number and connect the two when the second call is answered. I an able to make a simple call to two numbers and connect them using the manager API but playing the announcement has me beat. Suggestions anyone? Bruce Ferrell

Hmmm.... Can't place calls... Can't access website... Neither of the 3 nameservers answer anything... Anyone heard/know something to explain all this?

On Thu, 8 Jun 2017, Bruce Ferrell wrote: > Yes, 7 does track upstream. upstream 6 uses systemd also and Scientific > Linux 6 does not. I would say that indicates a solution. Upstream 6 uses systemd? jh

Hi All, Background: I have HP RAID setups (Smart Array 5, shows up as /dev/cciss/c0d0) on my DL380s, and they run great with CentOS. I have had a drive failure (HDD lights up amber), so I pulled the HDD, replaced it and the RAID controller rebuilt the array in a jiffy - no probs. My question: I cant find anything in the logs to alert me that a drive failed - this makes sense since the RAID

so far all the mirrors I've checked have 3.9 in the directory for 3.x Can anyone tell me how to get back versions? I'm looking for 3.4 or 3.5 Thanks in advance Bruce Ferrell