similar to: Cent OS clustering and Support.

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

i'm configuring a storage server with CentOS 6.2, it uses a LSI MegaRAID SAS controller, I'm using LSI's megacli to configure the storage... Any ideas on how to get drive failure notifications out of this system? I'm configuring hot spares but I'd still like some sort of notification when a drive has failed so the spare can be replaced. -- john r pierce

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i? On this page: http://docs.avagotech.com/docs/12351997 there is a curious note on the left that reads: "Integrated MegaRAID support available upon request" After one mostly fruitless round of chatting with LSI/Avago/Broadcom and one completely fruitless round of chatting

On 1/30/2015 1:53 AM, Gordon Messmer wrote: > On 01/29/2015 05:07 AM, Jatin Davey wrote: >> Yes , it is a SATA disk. I am not sure of the speed. Can you tell me >> how to find out this information ? Additionally we are using RAID 10 >> configuration with 4 disks. > > What RAID controller are you using? > > # lspci | grep RAID [Jatin] [root at localhost ~]# lspci |

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

Valeri Galtsev wrote: > > On Fri, May 6, 2016 1:36 pm, m.roth at 5-cent.us wrote: >> Got a new box I'm trying to set up. I configured the RAID from the >> firmware, but "fast initialize" was sitting there at 0% (it's about 43 >> or 45TB). The first time I tried this, I said background, and >> rebooted the system. >> >> And the stupid

On Fri, January 20, 2017 5:16 pm, Joseph L. Casale wrote: >> This is why before configuring and installing everything you may want to >> attach drives one at a time, and upon boot take a note which physical >> drive number the controller has for that drive, and definitely label it >> so >> y9ou will know which drive to pull when drive failure is reported. > >

On Thu, November 2, 2017 11:18 am, hw wrote: > m.roth at 5-cent.us wrote: >> hw wrote: >>> Richard Zimmerman wrote: >>>> DO NOT buy the newer HPE DL20 gen9 or ML10 gen9 servers then >>>> (especially >>>> if using CentOS 6.x) >>> >>> What would you suggest as alternative, something from Dell? >> >> Yep, Dell's

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

On 1/30/2015 9:44 AM, John R Pierce wrote: > On 1/29/2015 7:21 PM, Jatin Davey wrote: >> [root at localhost ~]# lspci | grep RAID >> 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 [Invader] (rev 02) > > to get info out of those, you need to install MegaCli64 from LSI > Logic, which has the ugliest command lines and output you've

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

I just had an IBM in a remote location with a hardware raid1 have both drives go bad. With local machines I probably would have caught it from the drive light before the 2nd one died... What is the state of the art in linux software monitoring for this? Long ago when that box was set up I think the best I could have done was a Java GUI tool that IBM had for their servers - and that seemed like

Got a new box I'm trying to set up. I configured the RAID from the firmware, but "fast initialize" was sitting there at 0% (it's about 43 or 45TB). The first time I tried this, I said background, and rebooted the system. And the stupid annoying alarm started up as the system came up. This time, having *finally* figured out how to set up hot spares from the WebBIOS, I suspended

On Thursday 02 November 2017 14:10:25 Bowie Bailey wrote: > If you want raid 5 or 6, then you should get a hardware controller. For > raid 1, mdadm should work just fine.? I would suggest trying it before > buying a raid controller.? If it works for you, you save a few hundred > dollars and you have one less piece of hardware to worry about. > > I haven't looked at them in

On Thu, May 28, 2015 11:12 am, Kirk Bocek wrote: > > > On 5/28/2015 9:03 AM, Valeri Galtsev wrote: >> On Thu, May 28, 2015 10:46 am, Kirk Bocek wrote: >>> On 5/26/2015 11:07 AM, m.roth at 5-cent.us wrote: >>>> Push came to shove - these things gag on a drive > 2TB. >>> I ran into this a couple of years ago with some older 3Ware cards. A firmware

Hi, I have a LSI Logic sata/sas raid running, is there a way to see the state of the volume, like optimal, degraded or resyncing? I've tried several commands with camcontrol but I cant figure it out. -- Peter Ankerst?l peter@pean.org http://www.pean.org/

On Fri, January 20, 2017 7:00 pm, Cameron Smith wrote: > Hi Valeri, > > > Before you pull a drive you should check to make sure that doing so > won't kill the whole array. Wow! What did I say to make you treat me as an ultimate idiot!? ;-) All my comments, at least in my own reading, we about things you need to do to make sure when you hot unplug bad drive it is indeed failed

On 7/26/2016 2:38 PM, Peter wrote: > On 27/07/16 09:11,m.roth at 5-cent.us wrote: >> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 >> >[Falcon] (rev 03) >> >so it*should* accept an SAS drive. I've got a Cheetah that's a few years >> >old, and having