similar to: Kernel Panic on HP/Compaq ProLiant G7

Just thought I'd pass along an error I received this weekend after upgrading two servers to 5.6. Both are HP Proliant DL380 servers running 64-bit, but one is a G6 model and one is a G7. After the upgrade and the reboot to the 2.6.18-238.9.1.el5 kernel, both servers displayed the following error at boot: "pci_mmcfg_init marking 256MB space uncacheable." Some Googling

Hello, Has anyone out there been able to qualify the Proliant DL360 G7 for your Solaris/OI/Nexenta environments? Any pros/cons/gotchas (vs. previous generation HP servers) would be greatly appreciated. Thanks in advance! -Anh

On Sat, November 4, 2017 4:32 am, hw wrote: > Valeri Galtsev wrote: >> >> On Fri, November 3, 2017 3:36 am, hw wrote: >>> Valeri Galtsev wrote: >>>> If you have not Dell server hardware my choice of [hardware] RAID >>>> cards >>>> would be: >>>> >>>> Areca >>> >>> Areca is forbiddingly expensive.

On Fri, November 3, 2017 3:36 am, hw wrote: > Valeri Galtsev wrote: >> If you have not Dell server hardware my choice of [hardware] RAID cards >> would be: >> >> Areca > > Areca is forbiddingly expensive. Yes, and it is worth every dollar it costs. All good RAID cards will be on the same price level. Those cheaper ones I will not let into our stables (don't

Hello, I try to create some kind of mail backup system. What I need is system that will store mail for the whole domain, and allow me to restore messages from/to specified email at that domain. The scheme is pretty simple: on our main mail server the SMTP server itself has a rule to send a copy of every message to 'backup at backupserver.host', and the backupserver.host domain is

On a CentOS 6 64bit system, I added a couple prototype SAS SSDs on a HP P411 raid controller (I believe this is a rebranded LSI megaraid with HP firmware) and am trying to format them for best random IO performance with something like postgresql. so, I used the raid command tool to build a raid0 with 2 SAS SSDs # hpacucli ctrl slot=1 logicaldrive 3 show detail Smart Array P410 in Slot 1

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

Carlos: Te agradezco mucho tu rápida respuesta y mucho me apena haber planteado tan mal el problema. Porque la matriz en realidad es: g1 g2 g3 g4 g5 g6 g7 g1 0 18 13 16 11 12 15 g2 18 0 25 13 22 16 10 g3 13 25 0 28 23 13 25 g4 16 13 28 0 6 7 3 g5 11 22 23 6 0 18 17 g6 12 16 13 7 18 0 8 g7 15 10 25 3 17 8 0 Entonces cada cantidad debe conservar la pertenencia al grupo

Hello. Is someone here using VoIPmonitor? I am using just the sniffer and I found some pcap files that contain some odd streams. For example, I have a file with 3 streams, but the weird stuff is that 2 streams are the same (e.g., have the same source address and port and same destination address and port). Example: "Source Address","Source Port","Destination

Dear R helpers,   Following is a R script I am using to run the Fast Fourier Transform. The csv files has 10 columns with titles m1, m2, m3 .....m10.     When I use the following commands, I am getting the required results. The probelm is if there are 100 columns, it is not wise to define 100 commands as fk <- ONS$mk and so on. Thus, I need some guidance to write the loop for the STEP A and

A customer is looking to replace or augment their Sun Thumper with a ZFS appliance like 7320. However, the Thumper was used not only as a protocol storage server (home dirs, files, backups over NFS/CIFS/Rsync), but also as a general-purpose server with unpredictably-big-data programs running directly on it (such as corporate databases, Alfresco for intellectual document storage, etc.) in order to

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hello, I'm trying to install CentOS 6.0 64bit on a HP ProLiant ML110 G7 with a HP Smart Array B110i SATA RAID Controller. One logical drive (RAID 1+0) on the RAID Controller is already build. CentOS Installation can't find the logical Drive, but it shows me the zwo physical drives (sda+sdb). After searching the web, I found following hints:

I have a situation very similar to whats in http://www.syslinux.org/archives/2013-January/019251.html The server is setup to provide info over dhcp+tftp and I'm planning on chaning that to dhcp+http so I copied gpxelinux.0 to pxelinux.0 and started failing. The client (in my case it's a hp proliant BL460c G7) manage to get gpxelinux.0 loaded but when it comes to load the config file it

I've just setup nic bonding on our server (DL585-G7 running Centos 5.5 x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be a /proc/net/bond0/info As far as I can see, I don't have one and I'm not sure if it should be there or its absence is a

I'd like to submit a patch to the 'hidups' driver. I'm a bit new to open-source development model, so I hope I'm not committing a faux paus by just posting it here. I did verify that the problem still exists (by source code inspection) in the latest dev snapshot, which is nut-2.0.3-pre2. I'm using nut-2.0.2 myself. The problem is when I'm connecting to my APC

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel

Hello, When I run LLC with option "-O0 -march=sparc" on following testcase, fast register allocator crashes with "UNREACHABLE executed" error. LLC generates code successfully with other standard register allocators available. $ cat call.ll define void @test() nounwind { entry: %0 = tail call i32 (...)* @foo() nounwind tail call void (...)* @bar() nounwind ret void }

I have a problem where SIP calls from some providers are dropping at 15 minutes. The topology is: Client sends calls to a host running OpenSIPS, OpenSIPS sends calls to an Asterisk server. Below, 'Client' is the IP address of the client's host (running FPBX-2.8.1(1.8.20.0) 'OpenSIPS' is the IP address of my host running OpenSIPS 1.7.2-tls 'Asterisk' is the IP

Data processing? I have a large number of csv files from animal tracks that look like this: Date_ Time_ Speed Course Type_ Distance 30/03/2012 11:15:05 108 121 -2