similar to: CentOS 5.x 32bit VPS Ping Issue

Hello, I realize again test by resuming all 0 with the following configuration and I arrive at the same result. -------------------- smb.conf [global]     netbios name = svdom     server string = Gestionnaire de domaine     workgroup = dom.domain     hosts allow = 192.168.15. 192.168.6. 10.0.7.     security = user     domain master = yes     domain logons = yes     prefered master =

Hi, Greg, Eddie, I found that in SR-IOV + HVM environment, ping latency depends on ping interval. The NIC is Intel 82576 (1000Mbps), server uses xen-4.0.1, domain-0 is kernel-2.6.32 and HVM is kernel-2.6.31. The server and client are connected through a 1000Mbps switch. The data is as following: # ping -i 1 192.168.0.21 PING 192.168.0.21 (192.168.0.21) 56(84) bytes of data. 64 bytes from

Le 06/09/2018 à 10:47, Rowland Penny via samba a écrit : > On Thu, 6 Sep 2018 09:16:05 +0200 > Philippe Maladjian via samba <samba at lists.samba.org> wrote: > >> >> >> Le 05/09/2018 à 18:32, Rowland Penny via samba a écrit : >>> If you are going to sanitise an object, please use it everywhere. >>> >>> The upgrade is trying to use

Hi all, A client just phoned me and said he could not SSH into his VPS, yet he can ping it. So, I login to the host node, and check it out, can''t SSH into. I shutdown iptables on the VPS (via xm console serverza.vm) but still can''t SSH into it. I restart the VPS, still can''t SSH into it. So, I check the host, and found this in /var/log/messages: Jul 22 19:19:07

Hi folks, I read quite some posts about "Destination host unreachable" problems before, but none could help me to solve my issue. So here we go: This is what I am using: SUSE Linux Enterprise Desktop 10 SP1 - Current with all updates Network configuration of my dom0: foobar:~ # ip a 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd

Hello, I''ve got this problem. There is an linux server with 2.4.24 kernel and pinging from him to internet (or from lan) ping randomly jumps up: 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=387 ttl=59 time=30.0 ms 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=388 ttl=59 time=32.6 ms 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=389 ttl=59 time=34.9 ms

With 1.6.1 svn: [2009-04-26 15:01:00] NOTICE[1844]: chan_sip.c:9927 sip_reg_timeout: -- Registration for '17470121145 at proxy01.sipphone.com' timed out, trying again (Attempt #30) [2009-04-26 15:01:00] WARNING[1844]: acl.c:376 ast_get_ip_or_srv: Unable to lookup 'proxy01.sipphone.com' [2009-04-26 15:01:00] WARNING[1844]: chan_sip.c:10037 transmit_register: Probably a DNS

Tinc team: I'm creating a vpn for my work laptop and vps and got trapped, here are my config files: on laptop: *tinc.conf Name = envy13 Device = /dev/net/tun ConnectTo = main *hosts/main Address = <my vps ext ip address> Port = 655 Subnet = 10.0.0.1/32 *hosts/envy13 Port = 655 Subnet = 10.0.0.2/32 *tinc-up #!/bin/sh ip link set myvpn up ip addr add 10.0.0.2/32 dev myvpn ip route add

Hi ALL, Here is a weird problem comfusing me for a long time. i''v installed xen 4.0.1 with linux kernel 3.1.0-rc9+ Everything works fine except i cannot ping to the gateway in a PVM domU. i''v installed bridge-utils and brctl show like this bridge name bridge id STP enabled interfaces eth0 8000.00219b480d56 no

Hi guys!! This is something that have always bother me, hope you can help me... :) I've 8 server connected using IAX / DUNDi, it works just fine. However, sometimes when some of our links goes down the server takes forever to appear back as OK at DUNDi's list and people can't call the other Box. It's happening right now: CLI> dundi show peers 00:14:22:16:54:c5 200.X.X.6

Hello all, It''s my first letter on this list, and, my English is not very well. Please take me indulgence for grammar/syntax and over erorrs :)) I have trouble for acl''s of ip range. But, acl for one host (with ip adress) work fine. Please help me for make work acl/find erorr in acl. Becouse I''m new shorewall user, I maked test configuration on Virtual Mashine

I''m trying to shape traffic on a Devil-Linux box. This note was originally sent to their maillist, because the LARTC list appears to have been down for the past few days. My mailbox was just flooded with a half dozen or so confirmation requests in response to my repeated attempts to subscribe to this list. ---------- Forwarded message ---------- From: drew einhorn

Hi all, I''m running some tests with netem and I noticed some strange behaviour that looks like a bug: I''m pinging another machine and adding delay with netem. When I tell netem to give me a 10ms delay, it works fine. The problem is that when I ask for a 11ms delay, it gives me 20ms! It happens for any value between 11ms an 20ms, and it repeats for values over 20ms, now

Hi, My bridging stops when I start a third Xen domain !?!? I have a few domains setup (mail, wiki, pbx). If I start two domains bridge networking works great. But if I start a third, either the new domains does not work or one of the other DomUs stops working! By stop working I mean I can''t route traffic outside of Dom0. I have been looking at this on and off for a couple of weeks.

hi all i have problem with my multi-site AD-DC installation, one of my DC, suddently cant start well, i think problem(corrupt) with the LDAP database then i try to re join it, but every time i try to join it i always has issue like this /Finding a writeable DC for domain 'domain.co.id' Found DC pdc.domain.co.id Password for [domain\administrator]: workgroup is domain realm is

Hi all, My setup is Debian testing dom0/domUs with a 2.6.32 pvops kernel from Debian unstable. Hypervisor is 3.4.2 from Debian testing. I use network- and vif- route with a default route in domU pointing to the nic because multiple IPs with bridge would trigger port shutdown on the switch (only one mac-address allowed per port). A subnet is routed to the dom0, which then knows which addresses the

Hello. I have some problem, with a new configuration on a new PC. I want to setup a SAMBA PDC using an HOWTO. This howto was working on OPENSUSE 10.1 with a X86 processor and I have used it a lot of time. Now I use OPENSUSE 10.3. The new PC run a X64 processor. After the fresh install and following : http://samba.org/samba/docs/man/Samba-HOWTO-Collection/diagnosis.html I could not make

Hao Yu Commercial Scale Out IBM T.J. Watson Research Center 1101 Kitchawan Rd/Route 134, Rm 36-019 Yorktown Heights, NY 10598-0218 914-945-1854, Email: yuh@us.ibm.com ----- Forwarded by Hao Yu/Watson/IBM on 10/31/2006 09:52 AM ----- Jimi

Hao Yu Commercial Scale Out IBM T.J. Watson Research Center 1101 Kitchawan Rd/Route 134, Rm 36-019 Yorktown Heights, NY 10598-0218 914-945-1854, Email: yuh@us.ibm.com ----- Forwarded by Hao Yu/Watson/IBM on 10/31/2006 09:52 AM ----- Jimi

i am hoping this attachment gets through. It deals with bug in ping that made it very difficult to set up a system with two gateways. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20091009/ddfc8176/attachment-0004.html> -------------- next part -------------- An HTML attachment was scrubbed... URL: