similar to: PCI ethernet card for CentOS

Hello listmates, As some of you may know we have been having a really bad problem with Realtek Semiconductor Co., Ltd. RTL-8169 cards. See here for details: http://forum.nginx.org/read.php?24,140124,140224 So now my question is, what PCI 1 Gbit/s Ethernet adapters should I use under CentOS? If you have had a consistent positive experience with any particular chipset/brand please speak up.

Hi, I am looking for dual or quad fast ethernet NICs that work with CentOS. There is no need for high performance so regular fast/pci is ok. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20101228/1f5e2944/attachment-0001.html>

Hello, I need some advice how to debug this issue ... Recently I got a new mainboard for a router, it's a Gigabyte GA-H77N-WIFI with two onboard re(4) NICs. The problem is that re0 works fine and re1 doesn't: It doesn't receive any packets. Tcpdump displays all outgoing packets, but no incoming ones on re1. Ifconfig shows the link correctly (100 or 1000 Mbit, depending on where I

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

I have a curious problem with an old WRT54GL router, which I use as a WiFi access point on my LAN: Internet->ADSL modem->CentOS-7 computer->WRT54GL router The router has always had a slight problem of losing connection every so often - it used to be every couple of days, but recently it has become much more often. My cure was always to disconnect the power from the router for 10

Hello list I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R motherboard. Integrated network card is Realtek 8111B. I can not wake the computer after I shutdown it from FreeBSD. It is a dualboot system - windows xp and freebsd. If I shutdown the computer from windows - later I can wake it up with magic packet. Even if i shutdown the machine on the boot menu with the power

I'm running a Linksys WRT54GL router from my CentOS-7 home server. Every now and then (maybe once every 2 days) the router's WiFi cuts out, and I've found no way to solve this except to disconnect the power from the router, wait 10 seconds and then re-connect. This always works. The router is running under dd-wrt. My question is - which makes it a tiny bit CentOS-related - does anyone

Hi all, I've recently upgraded a system from CentOS 4.4 to CentOS5, and now when the system boots, the r8169 ethernet card doesn't come up. After the boot sequence, if I type "ifup eth1 | ifup eth1.10 | ifup eth1.203" then the adapter starts up ok. It seems to be something with the boot sequence it loads the ethernet adapters a different way around (ie 4.4 eth0 is now

Here is what I did: # cd /root/nut/ # nut here it's checkouted repository # ./configure --with-user=_ups --with-group=_ups # cd drivers/ # make riello_ser # chgrp bin riello_ser # cp riello_ser /usr/local/bin # here I copied builder driver to folder where nut-package will store their files/drivers # pkg_add nut-2.6.5p1 # ls -la /dev/tty00 crw-rw---- 1 _ups _ups 8, 0 Jul 30

Dear colleagues, experimenting with new amd64-based router we found strange re(4) behaviour when working in autoselect media mode: whenever promisc mode turned on, renegotiating occurs, leading to 3 to 45 (depending on STP settings on the switch) network unavailability. Moreover, some other re(4) setting changes seem to disturb link state unneededly (such as ifconfig re0 -vlanhwtag) The most

Hello to everybody, Sorry if my english isn?t very good. I need pass 802.1q through a VPN between two offices. I have mounted a WRT54GL, with OpenWRT firmware, conected to a switch trunk port in both offices. In the switch of the first office I have created five tagged VLANs and I need pass these VLAN to the second offices where it has created it too. Can I do this with Tinc in HUB/Switch

Anyone got this working over a LAN under CentOS? The instructions claim it is easy to connect after pressing the WPS button on printer and router. Sadly, I don't see a WPS button on my Linksys WRT54GL router. When I press the WPS button on the printer the WiFi icon flashes, but I don't see any attempt to connect in /var/log/messages on my CentOS-5.5 server. Any advice or suggestions

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

Hi, I've just installed asterisk 1.2.1 on my openwrt distro ( I own a WRT54GL by Linksys ) . No problem by now, but I can see that my 3 snom 320, once they started they send subscriptions to asterisk, and I can see that running: sip show subscriptions But, after one hour about, OR when I do asterisk reload , asterisk losts all th snom subscriptions. Someone can help me please? Thanks

I'm running a CentOS-5.6 server, which in general runs perfectly. My setting is possibly a little unusual: ADSL -> Billion 5200S RC modem/router -> CentOS-5.6 HP MicroServer -> Linksys WRT54GL router . My daughter is just visiting me, and she has to contact her job using AT&T VPN on her laptop under Windows XP. Unfortunately this does not work on my system when connected to

I have a LinkSys WRT54GL router, which I would like to attach to my CentOS-5.6 server, to set up a LAN 192.168.2.* . The server is attached to the internet through a Billion modem/router which has a single ethernet outlet. The instructions for the LinkSys router assume that it is being attached directly to an ADSL modem. But for various reasons I want everything to go through my server. I wonder

Hi, Last week I finished installing a small network in a private school : one server (an old IBM X225), seventeen desktops (Fujitsu Siemens PIV 2.4 GHZ, 512 MB RAM, 40 GB HD), all running CentOS 5.5. One extra machine is acting as a router, in that it is installed between the DSL modem and the network, with two Ethernet cards, and it's taking care of DHCP, DNS, NTP and also acts like a

Hi list, Are there any problems with the if_re ? After upgrade RELENG_7 on my laptop NIC stopped to work:( uname -a: FreeBSD notebook.minsk.domain 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #3: Fri Apr 10 20:38:55 EEST 2009 root@notebook.minsk.domain:/usr/obj/usr/src/sys/tiger-asus-a6m i386 notebook# dhclient re0 DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on re0 to

Hi all, I swapped a Realtek 8139 100M Net Card for a Realtek 8169 Gig Net card in a Centos 5.6 system. After reconfiguring the network settings I find that on boot up the 8169 interface does not start. The startup script says something like "The 8169 is not available..." ifconfig -a shows a device with the right mac address called __tmpsomethingorother I can get it going if I

I'm running CentOS-6 on an HP MicroServer with a Billion 5200S modem/router connecting to the internet. I'm running the standard CentOS-6 firewall on the server. (1) I can open port 22 on the Billion, allowing me to ssh in from outside. But for some reason I cannot ping the same address from outside. (I can ping it internally.) Why is this? I'm not sure if the problem lies with the