similar to: LSI MegaRAID 320-2E PCIe RAID Controller

Hi All: I have an HP DL380G5 server which I am loading CentOS 6.2 on and it does not appear to recognize all of the RAM installed on the server. The BIOS is reporting 26GB however top is reporting: Mem: 15720140k total, 418988k used, 15301152k free, 30256k buffers Swap: 17956856k total, 0k used, 17956856k free, 135536k cached and free is reporting: total used

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the JavaScript/image loaded web pages for HP is

Author: cz147101 Repository: /hg/zfs-crypto/gate Revision: a0a1d0c8868e9d02c246eee283f447c052b5aceb Log message: 6317422 lsimega should support LSI MegaRAID 320-2e adapter Files: update: usr/src/pkgdefs/SUNWlsimega/postinstall

Hi, folks, Since I've gotten a total of one response in days on the HP forum, maybe the collective mind here has an answer.... As I've mentioned in other posts, we have an HP dl580 g5 that started throwing ECC errors. But wait, it's worse: memory is mirrored.... And the thing is fully populated with 32 DIMMs. I took my best guess, pulled the matching set of DIMMs, and took two

CentOS 4.6 Hi All: I am now officially stumped. I have tried everything that can think of and I have googled until I am blue in the face and tried just about everything that I could find that looked the least bit like it might apply and still no (or at least partial) joy. I am going to cram as much information into this email as I can and hope that someone out there can either tell me what I am

From: Warren Young Sent: April 22, 2015 20:46 > On Apr 22, 2015, at 11:56 AM, Hugh E Cruickshank > <hugh at forsoft.com> wrote: > > > > I have done some "what if" testing. > > Using which tool? My simulator, or something you cooked up > yourself? If the latter, would you care to share? I cobbled something together in OpenEdge ABL. I have uploaded

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal

i'm configuring a storage server with CentOS 6.2, it uses a LSI MegaRAID SAS controller, I'm using LSI's megacli to configure the storage... Any ideas on how to get drive failure notifications out of this system? I'm configuring hot spares but I'd still like some sort of notification when a drive has failed so the spare can be replaced. -- john r pierce

I generally 3Ware controllers get recommended but the servers we are looking at getting use LSI Megaraid SATA 150-4 controllers. I was wonder what experiences there are under CentOS 4 with these positive & negative? Regards, Paul Berger

Hi all, Does anyone know of a Linux rescue CD with driver for a SLI MegaRAID 8708? -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

On 05/01/2015 15:14, Philippe BOURDEU d'AGUERRE wrote: > Happy new year ! > > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. > I have a similar system, and don't have your problem: #

On 1/5/2015 7:14 AM, Philippe BOURDEU d'AGUERRE wrote: > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to > boot fine. works here fine on the 9261, which is an OEM version of the same card with the connectors in a different orientation... you might check your LSI firmware revision.

On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: > I want to install Centos 7 latest build on NEC Server 5800/120b-2. > > The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. which megaraid card? they've made quite a lot. lspci will list the card type... linux will only see storage on a megaraid thats configured as a logical unit (eg, put in a

On 08/18/2016 02:17 AM, Fawzy Ibrhim wrote: > I totally agree with John; NEC sold these servers with fakeraid from LSI as I used to login to LSI Firmware to manage the RAID disks. The NEC compatibility page at http://www.nec.com/en/global/prod/express/linux/centos.html indicates that the R120b2 is not certified for CentOS 7. CentOS 5 and 6, yes, but not 7. As there are other servers

Everyone, I am trying to install a Centos 6.0 system on a SuperMicro with an LSI MegaRaid SCSI 320-2 controller. I had originally tried to install 6.4, but the 6.4 install DVD does not boot with this configuration. See : http://bugs.centos.org/view.php?id=5377 Fortunately, the 6.0 install DVD worked fine until it failed to identify the hard disc controller. I checked the lsi.com site which

Le 05/01/2015 16:14, Philippe BOURDEU d'AGUERRE a ?crit : > > We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. > > Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't > initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot > fine. > > The server can't boot due to a bug in LSI megaraid module. Boot log ends

On 07/26/2016 11:21 AM, Jim Perrin wrote: > A number of older storage and network drivers were purged from the > kernel with the release of el7. If this hardware is old enough, it's > entirely possible that it's no longer supported out of the box. This is particularly likely if this same hardware has been used with "CentOS 5/6" as reported in the original message.