similar to: Replacing disk in RAID array with bigger disk?

Hello list I'm running Icecast 2.3.2. Every few seconds, streams are interrupted by a noticeable glitching or popping sound. It sounds like it's being caused by a buffering or latency problem but I'm not sure how to fix it. If the listener re-connects to the stream it stops the glitching for a few minutes, but eventually it returns. Glitching is also appearing in the dumpfiles

Listee's... I have a 5.5 box and I have formatted a partition as ext4 however I can't mount it, the mount command is telling me its an unknown file system type. fsck tells me the partition is a clean ext4 partition but I can't mount it. Some reasearch has lead me to believe the problem is that ext4 isn't enabled in the kernel by default in 5.5 (this was originally a 5.2 box that

Hi Geoff, > some questions: > > 1. What is the bitrate of your stream? > 128kbps > > 2. How much bandwidth do you have between your source and your streaming > server? > Fast connection, ~500kbps achievable upload. > > 3. How many listeners do you have? > < 10. The glitching occurs even with only 1 listener. It seems to repair itself for a while if

I have SAMBA working on Centos 5.5 - I can see and access my "home" directory from a Windows machine. I have created a new folder to share, changed the owner and group to my username and chcon -t samba_share_t to allow SELinux to share the folder. I can see this folder from Windows but not access it's contents. I think that the key reason is that there is no user assigned to the

I would like confirm one thing. Based on what I saw Redhat document before, look like CENTOS 5 (X86, 32 bits) only support 16 GB RAM. Is this correct? Thanks.

Hi, I'm looking for an open source client for icecast2 to run it on OSx Leopard 10.5.8 I took a look at Nicecast but wasn't convinced by it. Any suggestions? Best regards, -- Dan Bahena http://twitter.com/informatux http://xti.informatux.net

You can register on this site if you use linux on your desktop, to prove that we have at least more than 1% market share today :-) http://www.dudalibre.com/gnulinuxcounter?lang=en -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

Hi All, When a couple of EXT4 filesystems are mounted in a server I get the message Oct 1 18:49:42 sraid3 kernel: EXT4-fs (sdb): mounted filesystem without journal Oct 1 18:49:42 sraid3 kernel: EXT4-fs (sdc): mounted filesystem without journal in the system logs. My confusion is why are they mounted without a journal? They were both created with mkfs -t ext4 /dev/sdb mkfs -t ext4

So on a virtual server the root password was no longer working (as in I couldn't ssh in anymore). Only I and one other know it and neither of us have changed it. No other account had the correct privileges to correct this so I'm wondering, if I had mounted that vdi as a secondary device on another VM, browsed the file system and delete /etc/shadow would this have wiped all users passwords

Hi, I have a new server HP proliant DL320 G4, with two 160 GB SATA hdds.. I have installed CentOS 4.5 with mdadm without any problem, but when I disconnect one disk the server does not boot or I received a kernel panic when booting... I have disabled the SATA embeded raid (BIOS) and nothing.. I've also download the driver from HP site HP (Embedded SATA RAID Controller Driver Diskette for Red

Sorry if this has been asked previously. Does CentOS support IDE hardware RAID on HP DL320? Thanks, -j

Hello, I'm trying to boot a HP Proliant DL320 G5 with a HP Smart Array E200i RAID card (latest BIOS and latest RAID card firmware). With menu.c32 or vesamenu.c32 from syslinux 3.50 the system hangs Booting from local disk... PXE-M0F Exiting With the latest dev version (3.52-pre) it hangs with : vesamenu.c32: attempted DOS system call The issue has already been reported but

Hi people, I am building a cheap remote rsync backup server using a software raid 5 array of 4 500GB disks. What I have available on the market is: 1. HITACHI GST Deskstar T7K500 500GB 7200rpm 16MB cache Serial ATA II-300 2. SEAGATE Barracuda 7200.10 with NCQ 500GB 7200rpm 16MB cache Serial ATA II-300 3. Western Digital 500GB SATAII RAID EDITION Caviar SE16 7200rpm 8.9ms 16MB cache I am

I've got two DL385s and a DL320, and they all rock. iLO especially rocks, but to leverage the full functionality, you'll need to get the "Advanced License", which opens up full blown remote console capabilities (via Java). It's a separate piece of hardware that, as long as the server PSUs have power flowing into them, lets you do things like remotely power on/off/reset the

I thought I'd test replacing a failed drive in a 4 drive raid 10 array on a CentOS 5.2 box before it goes online and before a drive really fails. I 'mdadm failed, removed', powered off, replaced drive, partitioned with sfdisk -d /dev/sda | sfdisk /dev/sdb, and finally 'mdadm add'ed'. Everything seems fine until I try to create a snapshot lv. (Creating a snapshot lv

Is there any performance lost in using a software raid array with only 1 disk? I was wanting to use the mdadm monitoring tools to monitor the machines single disk drive for failures and such. Is there any performance hit for such a setup? Some machines have RAID some machines dont (for me) and I was thinking about a common setup. Also then if I want in the future I can actually just add the

I am trying to install on a DL320 proliant. The disk is not being recognized. It fails when setting up disk with "no devices" found. I dont get an sda or cciss either one. I tried to disable the on board smart array controller? That didnt seem to make a difference. Is there something special I need to do? Thanks, jerry

I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode is not enabled. According to server specs, it should have AHCI/NCQ capability, but ata_piix module gets loaded during bootup, not ahci module. Any ideas how to enable AHCI mode? lspci output: # lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation

Hi, I have this strange problem I need some help with.. It appears that I have harddisk noise captured by a Digium TE410P card (Same problem on 2 identical machines..) The machines are two Compaq Proliant DL320 G3's... Does anyone else have this problem.. Kind Regards Claus Futtrup --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com).

Le 18/02/2015 08:09, Niki Kovacs a ?crit : > > Apparently no spare devices have been created. So why do I only have 226 > GB of disk space under CentOS, when I had roughly 650 GB under Slackware? > An idea just crossed my mind. Could it be that 'df' is reporting a wrong partition size on the RAID 5 array? And how can I check if this is the case? -- Microlinux - Solutions