similar to: MegaRAID SAS 9280-24i4e -- Centos support.

Timo, Its interesting, I am presently attending a conference in NYC and in one of the tables I saw the redhat vendor. My first question to them was " What do you think about centos", they reply "You are using a distribution without support and that is prompt to failure..." I don't think this is an accurate statement is it? Anyway to make the story short, they keep telling

On 07/26/2016 11:21 AM, Jim Perrin wrote: > A number of older storage and network drivers were purged from the > kernel with the release of el7. If this hardware is old enough, it's > entirely possible that it's no longer supported out of the box. This is particularly likely if this same hardware has been used with "CentOS 5/6" as reported in the original message.

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Hi! I do a rsync between 2 machines. The throughput is only 2 MByte/Sec. Each machine is a Supermicro server with 2 x 8 Core Opteron 6128 64 GByte of ECC RAM 1 LSI MegaRAID SAS 9280-24i4e 24 x 2TByte SATA Disks as a RAID6 2 Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network-cards Both run Ubuntu 11.04 64Bit. Both use rsync version 3.0.7 protocol version 30 There are no

Hello, I'm running an Debian etch box with unstable and ever since the last upgrade to dovecot, I've seen odd things. At times, I would see emails would go missing from the Inbox or other folders, and I couldn't move emails that were moved from the Inbox to another folder back into the Inbox. These have seen gone away since I removed all dovecot.* files and .index* files from my

I have CentOS5.5 installed in the system. After updating the version of firefox, the videos are playing on the internet. Earlier the message "flash player download required" used to come. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20101213/e5dacb27/attachment-0002.html>

Dear centos community, I was in the process of loading the latest 5.5 release of centos in a VMWARE ESX 4.1 host as my first virtual machine, suddenly while booting I got a panic error with the following on screen. Can someone point me in the right direction. This machine has 24 cores and I allocated 1 for Centos to use with 1024MB of memory. Any clues or workaround to solve this problem? Thank

Hi there, I've a laptop with CentOS 8 and a PC with CentOS 7. After 3 years of break I was Scuba Diving last 3 weeks. Back at home I wish to download all dive logs from my divecomputer connext via IrDA to my PC. But no kernel modul for IrDA was found. [root at rechner1 ~]# modprobe ircomm modprobe: FATAL: Module ircomm not found in directory /lib/modules/4.18.0-147.6.el8.x86_64 [root at

An embedded and charset-unspecified text was scrubbed... Name: not available URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20111230/f132dad8/attachment-0004.ksh> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20111230/f132dad8/attachment-0006.html>

Dear Group, In the process of configuring bind, I created a new configuration file under /etc/named.conf options { directory "/var/named"; version "Nope."; }; zone "internal.micro.com" in { type master; file "internal.micro.com"; }; This is the definition I am using for the forward zone under /var/named/internal.micro.com

During installation of CentOS5.3 from DVD, the installation was interuppted due to an error in a rpm package as the DVD had lot of scratches. So I burned image of CentOS5.5 on DVD. I selected installation in graphical mode. The first graphical interface screen comes from where we proceed further by clicking next. This screen is almost black and its impossible to carry out further installation as

I am having difficulty trying to figure out how to get a computer to boot from it's local disk automatically after the pxe menu times out. I installed syslinux-3.11-4 with yum onto CentOS 5.5 It boots to the local disk if I select Local from the menu and press enter but it never times out and boots localy. The AUTOBOOT message doesn't appear either. Which instructions in the PXELINUX

Hi there, I've installed a new KVM-Server. The routing in all instances are only working after "arp -s ip_of_router mac_of_router" Server: CentOS7, KVM Clients: CentOS6 and Fedora 21 What going wrong? [root at bgstkvmlr01 ~]# ifconfig bond0: flags=5187<UP,BROADCAST,RUNNING,MASTER,MULTICAST> mtu 1500 inet6 fe80::3ed9:2bff:fe0b:c706 prefixlen 64 scopeid

I'm installing dovecot and migrating from mbox to maildir. I've read several articles concerning this process but I can't seem to find the answer to one particular question. What is the default name of the inbox when using maildir format? I need to create this in advance for each user and I don't know what dovecot is expecting for the inbox directory name. -- Andy Cravens

Hi, I'm trying to determine the phase of irregularly sampled data. Is there any particular reason why both spec.pgram and spec.ls return phase<-NULL for vectors? Thank you. Lisandro xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxx Lisandro Benedetti-Cecchi Associate Professor in Ecology Department of Biology - University of Pisa Via

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

Hi Everybody, I made R (v. 2.11.1) from source with the following config option: ./configure --prefix=/mnt/ami-centos5.5-64bit-base \ --exec-prefix=/mnt/ami-centos5.5-64bit-base \ --with-tcltk All seemed to go well, but when I tested it with: /usr/sbin/chroot /mnt/ami-centos5.5-64bit-base R It told me: /bin/R: line 217:

Hi! My telco is Deutsche Telekom and they got about 30 SIP servers right now. Currently I've set up a template for incoming calls in sip.conf and added each SIP server by it's IP address like this: [DTAG-in-1](DTAG-in-template) host=217.0.16.103 ... [DTAG-in-30](DTAG-in-template) host=217.0.20.99 I've done that to improve security and to be able to assign all calls coming in

Gang, For those who asked about making a Solaris system a Kerberos client to Active Directory, the magic document to have is: http://www.connectathon.org/seam1.0/files/c0101.htm See the section "How to Configure a SEAM Client Using a Windows 2000 KDC". SEAM was Sun's Kerberos client stuff in Solaris 8; it is just there as part of Solaris 9 and 10. These instructions apply if

Hi all, $ umask 0002 $ mkdir test $ ls -ld test drwxrwxr-x 2 user user 4096 Jun 23 19:04 test/ $ls -ld content drwxr-xr-x 2 user user 4096 Jun 23 19:29 content $ cp -r content test/ $ls -ld test/content drwxr-xr-x 2 user user 4096 Jun 23 19:29 content My question is, how can I make content directory permission mode to 775 if I do cp inside the test directory? Thanks. Regards, James