similar to: Centos and Bridging

Hi I got a FC4 system running as Host.  Within this I loaded Suse 10 as a guest OS, the config file is as below: kernel = "/boot/vmlinuz-2.6.11.12-xenU" memory = 100 name = "suseguest" nics = 1 vif= [''mac=aa:00:10:00:00:10, bridge=xen-br0''] ip = "192.168.2.2" disk = [''file:/dev/hdc3,hdc3,w''] root = "/dev/hdc3 rw" extra =

I'm sorry to bother you but I'm stuck I can not make a bridge work for me. My current configuration is: eth0 Link encap:Ethernet Hardware Adresse 00:1d:7d:d1:06:bd inet Adresse:192.168.1.1 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21d:7dff:fed1:6bd/64 G?ltigkeitsbereich:V according to all what I could find in the net. The following should

Hi, I have a fc14 box with two interfaces that I'm having some difficulty setting up a bridge properly. I have a few kvm guests set up and running, but I've switched from using NetworkManager to using standard networking with a bridge. I've modified the ifcfg-eth0 and created ifcfg-br0 as per the standard documentation, but I think I'm having routing problems. This is what the

inquiry about differences between the tap and the vnet in the virt-manager Greetings! I encounter a problem about the network when using virt-manager to create and run a VM. when I want to establish a network bridge for the guest OS, I generally use two kinds of ways described as fellow : First method : create a bridge with the help of linux commad: brctl, or Second method : using

I am installed Xen 3.0 on a Fedora Core 4(2.6.12-1.1454_FC4xen0) machine. This machine is currently running one host domain: [root@]# xm list Name Id Mem(MB) CPU VCPU(s) State Time(s) Domain-0 0 128 0 1 r---- 49.1 fc4-vm1 1 63 0 1 -b--- 18.5 Following is the network configuration for Domain-0: eth0 Link

xm list reveals the following information... Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 315 0 r---- 2058.1 Domain-1 11 342 0 -b--- 5.2 9611 Domain-2 12 342 0 -b--- 3.9 9612 Xen seems to be working beautifully but I have not yet figured out how to get Domain-0 to ping both Domain-1 and Domain-2,

host and guest both centos 5.5 network is 192.168.62.40 host is setup as follows [root at cloud2 ~]# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:64:12:10:D9 inet addr:192.168.62.199 Bcast:192.168.63.255 Mask:255.255.254.0 inet6 addr: fe80::21a:64ff:fe12:10d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1705488

I am having problem in ping or connect AP from Mobile Node(essid & channel is the same,maybe routing did not set properly but i fail to configure with route add default gw 192.168.3.4,its alway said network is unreachable ),My Mobile Node is using acx100 as driver while AP(redhat 9.0) is using HOSTAP 0.1.3.Any one can help? I heard How-To said we not need to set address on eth0 & wlan0

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and

Hello, I am facing some problems in bridged networking. I have successfully created a bridge br0 and added a virtual machine to it. Now the address of virtual machine is 10.1.3.31. I am able to connect to this virtual machine by another computer on same network. The virtual machine is hosting a simple python http server on port 8000, while some other service is running on port 80 When I try

Hi Folk, My BOX is running Debian Sarge. i recently setup a bridge with two NIC's for transparent proxy. However something weird i found as listed below when i run ifconfig. So just curious to ask why the hardware address of "br0" is the same as "eth1", it's supposed to be the same as "eth0"...normally. Should this cause a probelm with the bridge?? If so how

Hao Yu Commercial Scale Out IBM T.J. Watson Research Center 1101 Kitchawan Rd/Route 134, Rm 36-019 Yorktown Heights, NY 10598-0218 914-945-1854, Email: yuh@us.ibm.com ----- Forwarded by Hao Yu/Watson/IBM on 10/31/2006 09:52 AM ----- Jimi

Hao Yu Commercial Scale Out IBM T.J. Watson Research Center 1101 Kitchawan Rd/Route 134, Rm 36-019 Yorktown Heights, NY 10598-0218 914-945-1854, Email: yuh@us.ibm.com ----- Forwarded by Hao Yu/Watson/IBM on 10/31/2006 09:52 AM ----- Jimi

Hi, I hope someone could help me out. Pls find the details below. dom0: ifconfig before "xend start" eth0 Link encap:Ethernet HWaddr 00:0C:76:53:44:FB inet addr:10.0.0.3 <http://10.0.0.3> Bcast:10.0.0.255 <http://10.0.0.255>Mask: 255.255.255.0 <http://255.255.255.0> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX

Hi everybody, First of all, let me say that I searched a lot on the internet. I spent several hours sitting after my notebook, but I can't configure my network bridge in Ubuntu. I'm really desperate, so I hope somebody can point me out what I'm doing Hardware: ----------------------------------------------------------- $ lspci | grep controller 06:05.0 Network controller: Intel

Starting a new Xen setup, with off-the-shelf Wheezy, and the standard Xen packages, which turn out to be Xen 4.1 I used to just put a (network-script network-bridge) in the Xen setup, but I guess you can''t do that anymore... There are a variety of recipes to setup the network and bridging, since apparently the Xen setup doesn''t does this for you anymore. I''ve gone

Hello, my current network setup looks like the following: dom2-eth0 (172.30.1.22) netmask /24 | | xen-br1 (no ip) | dom1-eth0 (172.30.1.21) netmask /24 dom1-eth1 (172.30.0.21) netmask /24 | | xen-br10 (172.30.0.1) netmask /24 | dom0 | | xen-br0 (normal IP) | eth0 (same IP as xen-br0) |

Hello I''ve setuped a QOS bridge under debian 3.1 using 2.6.18.3 kernel + iptables 1.3.6 I''ve patched the kernel an Iptables with esfq+layer7 without problems. This simple script doesn''t log nothing ... And I''m sure to have eMule traffic (I''ve checked with tcpdump ) If I remove " -m layer7 --l7proto edonkey \" line I can see

Hello, I am not able to see vrbr0 in my box. Can some one help me with this ? . I am trying KVM+libvirt and planing to use Routed mode. I hope this virbr0 must be up for using this . I can give an strace too. OS : Debian , kernel 3.12.0 libvrit version : 0.9.8 ____________________________________________________________________ root@:~# ifconfig br0 Link encap:Ethernet HWaddr

Hello, I''ve read the FAQ and searched the mailing list but have been unable to resolve my issue with networking in DomUs. The following things I CAN do: +SSH from within DomU to Dom0 +SSH from within DomU to all other DomUs on the same machine +SSH to other machines from within Dom0 +SSH from within DomU to other machines +SSH from other machines to Dom0 (and use the xm commands to