similar to: EXT4 mount issue

Hi, Since upgrading to "2.6.18-194" I am getting odd messages in the logs. Such as; sraid3 kernel INFO task pdflush 259 blocked for more than 120 seconds. The output from > grep '120 seconds' /var/log/messages | tr : ' ' | awk '{print $10}' | sort | uniq -c 6 nfsd 4 pdflush This is from an NFS server that since the upgrade has been

Hi All, Thought I would let those that are interested know that I had success in running 24G on an Asus P6T with 24G kit of Kingston DDR3. While I was putting this together I saw lots of forum posts asking if anyone had tried it. Well we did here at our work and all looks great including running "memtest86" overnight. I have a fluid dynamics simulation running on it with 90% memory

Hi all, I issued the commands on a single disk system: with two partitions / is linux sda1 and /home is sda3 yum -y update yum -y install e4fsprogs reboot umount /home tune2fs -O extents,uninit_bg,dir_index /dev/sda3 e2fsck -yfDC0 /dev/sda3 That worked just fine. I then had a different system that is software raid. where / is linux and md0 and /home is md1 yum -y update yum -y

Listee's... I have a 5.5 box and I have formatted a partition as ext4 however I can't mount it, the mount command is telling me its an unknown file system type. fsck tells me the partition is a clean ext4 partition but I can't mount it. Some reasearch has lead me to believe the problem is that ext4 isn't enabled in the kernel by default in 5.5 (this was originally a 5.2 box that

Hi, I was wondering what is the current status fro ext4 support in Centos. I've noticed that is marked as dev when I try to use it from the installer. Does anybody have a scary story to prevent using it? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20090902/7ba417df/attachment-0001.html>

Is there a way to add residuals to plots produced by plot.gam in the mgcv package? I'm looking for something like what you get using resid=T in Splus plot.gam. Thanks in advance Toby -----Original Message----- From: Simon Wood [mailto:snw at mcs.st-and.ac.uk] Sent: 23 January, 2002 8:14 PM To: Toby.Patterson at csiro.au Cc: r-help at stat.math.ethz.ch Subject: Re: [R] multiple surfaces in

I have a machine that has worked fine for years on CentOS5. kernel-PAE-2.6.18-164.15.1.el5 is the last "works fine" kernel, but kernel-PAE-2.6.18-194.3.1.el5 crashes at boot every time. I tried banging on the side of the monitor to no avail. All kidding aside, here are pictures of my monitor when booting 194 in case that is helpful.

Should I report this as a bug somewhere? Or is it just a problem with the old fedora box, probably fixed long ago and not relevant to the centos list? On the server side, theme4, a very old fedora box, exports t4d5 via NFS. t4d5 is big, has lots of space, and the user tobiasf has plenty of quota: [root at theme4 ~]# quota -vls tobiasf|grep sdf /dev/sdf1 1312G 4578G 4769G

What will be the correct way to migrate ext3 to ext4 going from 5.5 to 5.6? Will something after the update ask if you want to migrate the file systems? Looking forward to some file system speed ups with large files. Thanks Jerry

Hi, I have a SATA PCIe 6Gbps 4 port controller card made by Startech. The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as Marvell Technology Group Ltd. 88SE9123 I use it to provide extra SATA ports to a raid system. The HD's are all "WD2003FYYS" and so run at 3Gbps on the 6Gbps controller. However I am seeing lots of instances of errors like this

a hd in my server failed. I noticed when I went to SSH in and get a copy of some files in /var/www/html I tried to tar the files and I was told No, read-only file system. I restarted and tried running FSCK manually (without -a or -p) and I get inode errors, short reads, etc. I tried booting to my CentOS 53 install DVD. I do linux rescue and I get to where it wants to know where CentOS images

Is anyone running either the newish Adaptec 5805 or the new LSI (3ware) 9750 sas raid controllers in a production environment with Centos 5.3/5.4? The low price of these cards makes me suspicious, compared to the more expensive pre-merger 3ware cards and considerably more expensive Areca ARC-1680. I've been 'burned' by the low cost of Promise raid cards (just as this group pointed

On Tue, Feb 27, 2018 at 12:00:29PM +0530, Karthik Subrahmanya wrote: > I will try to explain how you can end up in split-brain even with cluster > wide quorum: Yep, the explanation made sense. I hadn't considered the possibility of alternating outages. Thanks! > > > It would be great if you can consider configuring an arbiter or > > > replica 3 volume. > >

I have two Samba PDC's and I want to set them both up to trust each other. How can I go about doing this ? Cheers Andy Andrew J Robinson Computing Officer, School of Computer Science University of St Andrews North Haugh, St Andrews, KY16 9SS Telephone (0)1334 463272 http://www.dcs.st-and.ac.uk/~andyjr

Hello, I'm aware that not everyone who uses R is an astronomer, and so apologies in advance to those people for the nature of this email. I need to convert right-ascension and declination (RA & DEC) coordinates for an object on the sky into physical pixel positions in a FITS image in R. There is a C library that does this, WCSLIB by Mark Calabretta

dear devel, I thought you guys would know best - I have an R which fails to get communicate outside via a proxy, and Squid's logs show: ... 1581432434.501????? 0 10.5.8.17 TAG_NONE/400 4064? %C5/%B6* - HIER_NONE/- text/html 1581432497.231????? 0 10.5.8.17 TAG_NONE/400 4570 NONE error:invalid-request - HIER_NONE/- text/html 1581432497.338????? 0 10.5.8.17 TAG_NONE/400 4300?

Hello, Pressing the <TAB> key when typing a function into an R terminal does not produce the expected output. Currently, R will order all of the available function inputs into alphabetical order and present them as options, whereas it should display the inputs in the order they appear in the function. For example: > test = function(b,a,c){ print(b) a*c } > test(

Hello list, I recently enabled shared storage on a working cluster with nfs-ganesha and am just storing my ganesha.conf file there so that all 4 nodes can access it(baby steps).? It was all working great for a couple of weeks until I was alerted that /run/gluster/shared_storage was full, see below.? There was no warning; it went from fine to critical overnight.

My username is different on my Linux box than on my Windows box so I used the line username map = /etc/samba/smbusers in my smb.conf file and this file includes the line steve = steveb However when I'm logged on to my Linux box as 'steve' and use the smbclient command like this: # smbclient //<Windows computer>/Shared ... session setup failed: NT_STATUS_LOGON_FAILURE it

I was having some problems persuading optim() to give me the answers I wanted, & simplified down to: sqr<-function(x){(x+1)^2} optim(1,sqr) I accept this is a hammer to crack a nut, but was still expecting the answer -1. I got: $par [1] -0.8 $value [1] 0.04 $counts function gradient 12 NA $convergence [1] 0 $message NULL so I've