similar to: MegaRAID Storage Manager on CentOS 5.5?

I have LSI Logic MegaRAID 8480 Storage controller I am having trouble reconfigure one of the hardware raid devices It is configured with 4 hardware raid logical volumes on /dev/sda /dev/sdb /dev/sdc /dev/sdd. I am in the middle of rebuilding the system, ?and at this point I am only using one of the volumes, /dev/sda /dev/sda, /dev/sdb, and /dev/sdd are all 2 drive raid1 mirrors I will be

Have you checked the compile time in the boot messages to see you''re actually booting the kernel you think you are? The compile warnings are nothing to do with Xen. Ian > -----Original Message----- > From: xen-users-bounces@lists.xensource.com > [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of > Navid Khalili > Sent: 09 August 2005 02:48 > To:

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

Hi, what to do, if the kernel hangs on boot time with: megaraid: ABORTING-1 cmd=12 <c=0 t=0 l=0> megaraid: ABORTING-1[d7] fw owner Konrad Naumann _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On Thu, Jun 30, 2016 at 5:28 PM, Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > > On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: > > I've been googling, and haven't yet found the answer: does anyone here > > know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger > > than 2TB? > > > The following sources say, yes

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

Hello, I''m trying to install Xen3 on a server, but I can''t make the MegaRAID driver work. I''ve installed Debian Sarge, the stock kernel (2.6.8.2) works perfectly with the hardware. The SCSI RAID driver is megaraid. Hardware is : - IBM eServer xSeries 330 server - Dell PowerEdge RAID II controller I''ve recompiled the xen dom0 kernel (2.6.12.6) to include

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

Hi Ian-s, Two small patches for OSSTest. The first one turns on compiling the Linux modules for MegaRAID SAS, needed for the ultralisk machine in the Cambridge lab. The second adds an entry in the README file about the RebootTimeExtra host property, which I also needed to use for ulttralisk, as scrubbing 368GB of RAM really takes a lot! git://xenbits.xen.org/people/dariof/osstest.git misc Let

I've been googling, and haven't yet found the answer: does anyone here know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger than 2TB? mark

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design,

Hi, I'm trying to install Centos 4.3 x86 on a PE 1400SC but the install doesn't find any HD's. So then I get the option to load a module, so I choose for the megaraid_mbox module for the LSI LOGIC 4CH PERC but my RAID5 still doesn't get recognised. Had the same problem 2 years ago with FC3 wich was due to the megaraid module wich got obsolete in the 2.6 kernel but somebody filed

A gentle reminder on this issue Please can any one help on this problem? ________________________________ From: Manyam, Ramesh Sent: Wednesday, November 19, 2008 7:46 PM To: xen-devel@lists.xensource.com Subject: megaraid sas driver failing in Xen-3.4 unstable version On Xen-3.4 (unstable version), I have created CentOS HVM guest & WS2K8 HVM guest and dedicated MegaRAID SAS controller but

On 8/17/2016 7:46 AM, Fawzy Ibrhim wrote: > There's no option in BIOS to disable the RAID mode; this is NEC servers !! huh. i've never seen anyone using the lsi megaraid firmware with intel SATA ports, so thats two things weird about NEC, kinda glad I don't ever see those. -- john r pierce, recycling bits in santa cruz

Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal

i'm configuring a storage server with CentOS 6.2, it uses a LSI MegaRAID SAS controller, I'm using LSI's megacli to configure the storage... Any ideas on how to get drive failure notifications out of this system? I'm configuring hot spares but I'd still like some sort of notification when a drive has failed so the spare can be replaced. -- john r pierce

I generally 3Ware controllers get recommended but the servers we are looking at getting use LSI Megaraid SATA 150-4 controllers. I was wonder what experiences there are under CentOS 4 with these positive & negative? Regards, Paul Berger