similar to: No live migration for xen virtual machines any more

Given that the xenvm machine is based on vexpress but with an extremely limited selection of peripherals (the guest is supposed to use virtual devices instead), add "xen,xenvm" to the list of compatible machines in mach-vexpress. Changes in v2: - remove include skeleton; - use #address-cells = <2> and #size-cells = <2>; - remove the debug bootargs; - use memory@80000000

Hello I am trying to boot/install VM on XenClient. I would like to learn the way to install VM. Please teach the example of the operation and config file. (Especially, configuration file of method of displaying screen.) thanks. ========================================= [My Executed History] (1) I made a config file for VM(Windows XP:below). (2) I executed the following commands. # xenvm

Hi. I''m using Xen on RHEL cluster, and I have strange problems. I gave raw volumes from storage to Xen virtual machines. With windows, I have a problem that nodes don''t see the volume as same one.... for example: clusternode1# clusvcadm -d vm:winxp clusternode1# dd if=/dev/mapper/winxp of=/node1winxp clusternode2# dd if=/dev/mapper/winxp of=/node2winxp clusternode3# dd

Hi, I am new to citrix xen server. I have sucesfully installed citrix xen server 5.6.1 Fp1(free version) on my system. and through xencenter I have connected citrix xenserver and created vm (centos 5.5 32 bit), Installed Xen-tools in centos. My xenserver and xen vm ip details are below Xenserver Ip address - 192.168.1.5 Netmask - 255.255.255.0 Gateway - 192.168.1.1 which is my xencenter

Hello, I''m trying to get a freebsd virtual machine running following : http://www.yuanjue.net/xen/howto.html But I get : # xm create freebsd_xen_INSTALL -c Using config file "./freebsd_xen_INSTALL". Error: (14, ''Bad address'') Am I missing something? I am using xen 3.0.4. Thanks and regards, Sergi .... log output from xend.log: [2007-02-27 12:46:59

I am having problems when using a Dell PowerVault MD3000 with multipath from a Dell PowerEdge 1950. I have 2 cables connected and mount the partition on the DAS Array. I am using RHEL 4.4 with RHCS and a two node cluster. Only one node is "Active" at a time, it creates a mount to the partition, and if there is an issue RHCS will fence the device and then the other node will mount the

We have two virtual machines on ESX 3 running CentOS 4.3 and we'd like to turn them into some sort of highly available nfs file server. Currently, I am familiar with DRBD and RHCS but I was curious what others might recommend in such a situation. I'm not sure how easily we could use RHCS in such a situation because we don't really have the advantage of shared storage in this setup.

Hi all, Somebody knows when RHCS for CentOS 4 will be out??? -- CL Martinez carlopmart {at} gmail {d0t} com

hello folks! here's my situation: i've got two WTI RPB+ remote power switches (essentially a 5-port power strip which you can control via serial interface to make each of the ports switch on and off independently). they work fine; i plug a DB-9 cable into the back of my machine, fire up minicom, and i have full control. however, my eventual plan is to use these as fencing

Hello fellows, I have a problem with a 2 node RHCS cluster (CentOS 4) where node 1 failed and node 2 became active. That happened already last year and due to holidays the customer didn't recognize it. The cluster is just a failover for Apache and has no shared storage space. Customer now saw the situation, tried to fix it by rebooting node 1, which then failed to come back up. As

I want to set up a cluster that is used for web hosting (RHCS cluster). Recently, I experimented with a 2 node cluster and was able to run it successfully. However, I have started facing some issues with Apache, which I had configured as a service using the Cluster configuration tool. To do this Apache needs a floating IP address. This address is in addition to the network interface IP address.

Hi all, I am pleased to announce "libxenlight", a new small and lightweight C library that refactors existing code in a coherent and easy to use API to interface to the hypervisor and xenstore to perform operations such as domain creation and destruction, suspend/restore and pci passthrough. The goals of libxenlight are: - be easy to use and to extend - provide a simple and robust API

built for Centos 4, source from RHEL RHCS/RHGFS rpms in ftp.redhat.com/pub/redhat/linux/enterprise/os/RH{CS|GFS} kernel related rpms are built against i686 only. http://chantaipo.cjb.net:8080/pub/centos/4/RH{CS|GFS}/i386 only up2date works at the moment if you want to try them out.

Hi, I'm looking information about using libvirt with san (fiber channel) based storage and googling for a while i don't see anything about it. I send this email in order to get advices about libvirt and shared storage We use here, for 3 years now, 8 linux centos server connected to an hitachi FC SAN (multipath devices). Each server run Xen dom0 and use SAN LUNs to store Virtual machine

I think I really hosed my certificates somehow this morning trying to get PuppetDB and Puppet talking again -- here''s where I stand. My Puppet master and PuppetDB are again talking, or at least, aren''t complaining about communication. From my puppet master, I can run "puppet agent -t", and it runs just fine. From any other node on which puppet had been running, I

Hi? All: I have two physical machines as KVM hosts (clusterA.RHCS and clusterB.RHCS) , an iscsi target set into GFS. All I want is a HA Cluster which could migrate all the virtual machines on a node to another when the first node failed into some error status. So I created a cluster "cluster" using RHCS ,added the two hosts into the cluster . created a fence device . for every virtual

Hi all, I have problem with my servers. I use two of HP Blade Servers and RHEL 4.6 installed on them, and have IBM DS4700 connected to them. In those servers are running RHCS (Red Hat Cluster Suite) with GFS for handling Oracle Database. Yesterday, I had missing one partition from the storage, suddenly. I called IBM and they suggested to use RDAC. The question is, Why should use IBM RDAC for

I'm having a minor disagreement with a colleague over terminology. When you have a group of KVM Hosts which have access to the same network and storage (for purposes of migration) yet there is no clusterware or HA software involved...how does one refer to this group of hosts? I call them a "Host Group." He insists on the term "Cluster." To me, "cluster"

Hi all, I have installed rhcs on a CentOS 4.4 server with clvmd. When server reboots display a segmentation fault on line 504 in /etc/rc.d/rc.sysinit file, here: if [ -x /sbin/lvm.static ]; then 500 if /sbin/lvm.static vgscan --mknodes --ignorelockingfailure > /dev/null 2>&1 ; then 501 action $"Setting up Logical Volume Management:"

Hello! on my centos 4.4 i have enable selinux, but after this change syslogd can't no more run: # /etc/init.d/syslog restart Shutting down kernel logger: [ OK ] Shutting down system logger: [FAILED] Starting system logger: syslogd: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or