similar to: DHCP problem with virtual interfaces

Hi. I have a machine with a local DHCP server and a couple of virtual networks and I've configured the server for each virtual interface, so that I would be able to install VMs on the corresponding subnets using PXE. The problem is that the two DHCP servers (my local server and dnsmasq) are conflicting with each other causing the boot process to either fails or takes ages untill a VM can

I have a KVM setup. Host is 6.3. I have a bridged client running 5.9 Since upgrading to 5.9 I noticed that ntpd is being restarted every 12 hours. Jan 20 08:00:25 mercury ntpd[16103]: ntpd exiting on signal 15 Jan 20 20:00:26 mercury ntpd[27462]: ntpd exiting on signal 15 Jan 21 08:00:27 mercury ntpd[11343]: ntpd exiting on signal 15 Jan 21 20:00:28 mercury ntpd[25148]: ntpd exiting on signal

During the build (via a serial console) we get input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 running install... running /sbin/loader Sending request for IP information for eth0... Determining host name and domain... Sending request for IP information for eth0... Determining host name and domain... And there it hangs. On the 6.3 host: Feb 8 08:28:55 penfold dhcpd:

Hi - On my CentOS 4 cobbler server i am having some odd dhcp issues. There is only 1 dhcp server on the network and the cobbler box manages the dhcp. When i kick off the PXE install during the PXE phase things seem OK then when anaconda tried to get an IP sometimes things work out fine and other times it sits waiting for hostname/domainname. From the logs you can see that the mac requesting

Dear Centos-Virt: Help! Guest=XP Pro, SP2 Host=CentOS5; # uname -r; 2.6.18-8.1.8.el5 VirtualBox-1.4.0_21864_rhel5-1.i586 http://www.virtualbox.org/download/1.5.0/VirtualBox-1.5.0_24069_rhel5-1.i586.rpm.run I have two nic: eth0 is the internal network; eth1 connects to a DSL modem. I also have a fully functioning DHCP server on eth0 (works perfectly with Parallels for Linux). The directions

Hello all, I''m using shorewall on a linux machine that has two interfaces, eth0 being connected on the internal network (10.10.10.0/24) and eth1 being connected to the external network. On eth0 the IP is statically configured to 10.10.10.254 and there is a dhcp server running for the machines in the private network. On eth1, the IP is dynamically assigned by my ISP modem that acts as

Hi, I am trying to get an IP adress, nfs root host and directory information for a xen vm on the kernel level at boot time from dhcp. When the dhcp requests from the xen VM arrive on my server, my dhcp server denies to give them an IP address, it''s syslog reads: May 4 05:13:21 amalgam dhcpd: DHCPREQUEST for 255.255.255.255 (1.2.3.4) from 00:16:3e:00:00:11 via eth0: ignored (not

Package: logcheck-database Version: 1.2.39 Severity: normal I use dhcp3-server and a dhcp client which is Sony HDD video recorder CoCoon. The client not return client host name. In this case, dhcpd server assumed the client host name is (none). Therefor dhcpd output log described below. > Jan 7 10:49:24 on-o dhcpd: DHCPDISCOVER from 08:00:46:33:55:77 ((none)) via eth0 > Jan 7 10:49:25

Hi, Ok it's better like this!:-) The dhcp failover mode works well and 2 windows 7 client PC are well handled. They can have an IP and addresses are created/deleted in the DNS successfully. but... I try to remove my 2 old windows 2000 AD server from the production's LAN and put my 2 new Samba4 instead. The dhcp servers works fine but not really the DDNS. We have this kind of error

I have a CentOS 4.6 server running dhcpd. One of my client devices (a Panasonic KX-HCM280A camera) is trying to get a lease from that server. I can see the device accept a lease (it is a reservation), however it always releases the reservation after about 25 seconds: Jul 10 10:30:49 stargate dhcpd: DHCPDISCOVER from 00:80:f0:56:46:30 via eth0 Jul 10 10:30:49 stargate dhcpd: DHCPOFFER on

Hello guys, to describe my scenario i have 4 VLANS on my switch, each VLAN is different subject. I have one DHCP server for 3 VLANS + second one DHCP server for 1 VLAN - named VLAN 7 . Problem is , this started to make problems suddenly. VLAN 7 is not recieving IP adress from correct DHCP server . On DHCP server where declaration for subnet is configured, i am recieving this message : Jul 25

Hello, On Wed, 06 Apr 2011, Olivier DRAGHI wrote: > > I encounter problems during initramfs to install Debian Squeeze (with > FAI) on HP Proliant BL460c G7. > > ipconfig unable to configure the address via DHCP. > > The last message is: > IP-Config: eth0 hardware address d4:85:64:5e:c0:f8 mtu 1500 DHCP RARP > > On my DHCP server (dhcp3-server 3.1.1-6+lenny4)

I've found a problem, and I think it is in syslinux (specifically when it tries to load ldlinux.e64 under hyper-V). I have a physical computer with a Gigabyte GA-P85-D3 motherboard that successfully pxeboots using the EFI images, and I hold that up as exhibit 1 that my deployment environment works. It also implies that the syslinux.efi image works in some cases, but not in all. My Hyper-V

Rowland, You're absolutely right - with '128' both DHCP servers listen and *may* reply, therefore besides failover provide load balancing. Even if both servers respond with *Offers* to the client, the client will select one and issue *one Request* to the selected server. E.g., below is a log records from my failover DHCP (192.168.0.2) server: May 17 00:09:37 s-dhcpd-2 dhcpd[1578]:

On Wed, 17 May 2017 21:12:56 -0700 (PDT) artyom via samba <samba at lists.samba.org> wrote: > Samba - General mailing list wrote > > On Wed, 17 May 2017 04:26:16 -0700 (PDT) > > artyom via samba &lt; > > > samba at .samba > > > &gt; wrote: > > > >> I use official manual from wiki.samba.org for install samba 4.6.3 > >> (from

Package: logcheck-database Version: 1.2.23 Severity: minor Hi, a couple of minor corrections to the dhcp rule sets: First of all, the hostname matching parts need to include the "._-" signs (maybe . is not needed but it might be). Then when using failover, log lines of type DHCPDISCOVER and DHCPREQUEST may be entailed by the string ": load balance to peer <somestring>".

Hi, syslinux: I use pxelinux to install Linux from network. Currently, my problem is: The first time, the client machine can acquire the IP address from dhcp server but at the second time, the client machine cannot acquire the IP again. The only way is to remove the /var/lib/dhcp/dhcpd.leases file in server and restart the dhcpd service. Then the client machine can get the IP again.

I use official manual from wiki.samba.org for install samba 4.6.3 (from source) with bind_dlz on bind 9.9.10 (from source too). My OS is Debian Jessie x64 8.8 netinst. I use https://wiki.samba.org/index.php/Configure_DHCP_to_update_DNS_records_with_BIND9 article for dynamic dhcp updates on dns zones. DHCP is working but dns updates not: i have this messages on my syslog then dhcpoffer: May 17

Hi I have a problem with our pxelinux server, the server works for month without any problems. We use syslinux-3.51 version on an FC2 with in.tftp. Today I want to install a new server, but it fails after loading the kernel and booting stopped with this message ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered

Package: logcheck Version: 1.2.69 Severity: normal Tags: patch Logcheck's reports contains many messages like: Feb 7 19:03:57 srv dhcpd: DHCPREQUEST for 172.21.0.126 from 00:19:7e:9f:cc:32 (Hostname Unsuitable for Printing) via eth0 Feb 7 19:03:57 srv dhcpd: DHCPACK on 172.21.0.126 to 00:19:7e:9f:cc:32 (Hostname Unsuitable for Printing) via eth0 I create file