similar to: Introduction and request for help with virtualization

Hi, I am trying to setup two redundant Samba Servers. The file shares are on both servers and needs to be synced. My best solution is to run an rsync between them every 5 min ? Are there any smarter solution to this? Another problem is how I could solve the kerberos authentication in the best possible way? We have a Windows AD server and authenticate through kerberos. If server1 is down I

Been having a problem with my two Sipura 2000's dropping calls from the SPA-2000 side. Seems the calls are dropped right before the "Next Registration" time. Calls drop about ever 60 minutes or so. I have dialed from one port to the other and let it sit. After about 60 minutes or so the calls get dropped. System details are below Asterisk ver. CVS-HEAD-11/27/04-23:42:45 RHEL 3

I have Polycom ip-300 phones that worked yesterday but dont seem to work today (at least dtmf signalling once connected to the asterisk box) The current configuration is: [general] port = 5060 bindaddr = 0.0.0.0 context = test srvlookup = yes dtmf = inband allow = all dtmfmode=inband progressinband=no disallow=all allow=ulaw pedantic=no [202] type=user secret=xxxx context=test mailbox=202

http://www.ruby-forum.com/topic/73035#new Hi, I think I have network issue on my XP PC here trying to run up InstantRails and using it. I create an application and run up the server "ruby scripts/server" and it runs up, but then when I try to browse to it the browser just sits and spins and doesn''t connect :( Note that I posted this at

Hi, I am trying to setup a simple home voip service w/ * I have compiled and installed the svn source as a first step I am trying to configure SIP for inside my network. I have a handful of softphones and a few hardphones that I want to all be able to call each other I have configured users.conf with a single softphone(kphone) and have tried calling itself (ext 6000) and the demo from the

hi have a little problem of configuration I have a network with a server (192.168.0.1) and other pc one is 192.168.0.20 i want to reject all output from 192.168.0.20 for port 4000 (tcp and udp) i want accept incoming packet on port 4000 but reject outgoing packet on port 4000 so could you give me a solution please ? thank you PS : I hope you undersatnd waht I want because im frecnh and my

Yes this scenario works on my 2 systems which are at LAN. I made one system as server (192.168.0.20) and registered from other system... it is fine but now there is a different scene. actually there is a registered user named abc at system1 (192.168.0.20) having context [payasyougo] which is used to do outbound calls. we want to use this user's context and account so that when we register

Hi I Have a problem: I'm sharing ~600 folders on my samba server: [SHARE 192.168.0.20] comment = Private share for host 192.168.0.20 browseable = yes writable = yes path = /var/archives/USERS/192.168.0.20 public=yes hosts deny = 192.168. EXCEPT 192.168.0.20 [SHARE 192.168.0.21] comment = Private share for host 192.168.0.21 browseable = yes writable = yes path =

Hi, I think I have network issue on my XP PC here trying to run up InstantRails and using it. I create an application and run up the server "ruby scripts/server" and it runs up, but then when I try to browse to it the browser just sits and spins and doesn''t connect :( * I''ve tried: localhost:3000, 127.0.0.0:3000, 127.0.0.1:3000 + the IP address that

Hi. I have a default installation of Exim with only a few changed settings. It appears to only bind to the loopback interface. I have not set any local_interfaces values, as the default behaviour is to bind on all interfaces. But alas, exim does not respond on its IP address: [root at obiwan ~]# /etc/init.d/exim restart Shutting down exim: [ OK ]

Hi all, I have managed to setup a Fedora 7 box with 3 ethernet cards and two ADSL modem/routers from different suppliers as LARTC recommends. I am able to direct traffic for specific internal IPs either to one or the other ADSL line. However, I am faced with two problems I am struggling for the solution: 1. I have opened a few ports on the ADSL router/firewalls to talk to internal hosts; say when

Thanks Vardan, I will like to know if this scenario can work when peer is not having fixed ip and we use host = nasir.server.com ? also I have set insecure=invite,port what if i use insecure=no thanks again. Message: 24 Date: Tue, 11 May 2010 10:52:14 +0500 From: Vardan <hvardan71 at gmail.com> Subject: Re: [asterisk-users] Dialing a SIP Peer without using register strin To:

Hi My first post get no answer :=<, i post new with new elements. I have two Asterisk server, running on Asterisk 1.6: SRV1 = 192.168.0.5 on Asterisk 1.6.1.4 SRV2 = 192.168.0.20 on Asterisk 1.6.1.8 I want create a link for exchange call. on Srv1: iax.conf: [general] bindport=4569 bindaddr=0.0.0.0 language=fr bandwidth=low jitterbuffer=no forcejitterbuffer=no autokill=yes

Running FC6 and Samba 3.0.24-11.fc6. Workstation is XP Pro Initially, after disabling SELinux and turning off Iptables, I could access the shares that were set up. Came in this morning ready to start copying files and can't get in. Prompts me for a username and password which is rejected. I know it's not my workstation because I have another FC6/Samba server running and have no problem

Unreplied message when i try to connect to an internal system I''ve set up a shorewall 3.0.5 system on Fedora core 4 When i want to connect from an external computer to one in my network it does not reply. I connect from 212.19.195.160 to 212.178.64.74 trough port 8080 The rule i made is: DNAT  net   loc:192.168.0.20:80  tcp  8080 - 212.178.64.74 (and 192.168.0.20 can be reached

Hi, I am new to this list and this is first time i m posting here. please help me out currently I am working on dialing a sip peer on an asterisk server from 2nd asterisk server. scenario is like this. on my system i am using this peer in sip.conf. [abc] type=peer username=abc secret=mysecret host=192.168.0.20 context=default dtmfmode=rfc2833 ;restrictcid=no canreinvite=yes

I can now login to my domain from an XP Pro client, as a normal user. Only problem is, I get this: Windows cannot locate the server copy of your roaming profile and is attempting to log you on with your local profile. Changes to the profile will not be copied to the server when you logoff. Possible causes of this error include network problems or insufficient security rights. If this problem

I don't know.. It seems that anyone had try to made work tinc with lollipop. Even googoling i don't found anything about this argoument. Andrea Squeri Il 27/mar/2015 06:55 "Tatsuyuki Ishi" <ishitatsuyuki at gmail.com> ha scritto: > SELinux is considered as the biggest problem. > > On Thu, Mar 26, 2015, 22:37 Andrea Squeri <andrea.squeri at gmail.com>

Yes. The problem is lollipop. I tried to install tinc on my brother's device which mount a cyano 10.1( android 4.2.2) and it works. I don't understand which is the problem with lollipop. Is there a firewall that block the packets? Andrea Squeri If you are running Lollipop / Android 5.x on your Nexus 5, then you are probably seeing the same issue I was with it. lollipop seems to change

Hi, First sorry for my bad English. I made a vpn wtih tinc for link my home and my two office. In Addition I want to configure my android device to link with my vpn. The topology of the net is this: cubox(a linux machine in my home with vpn address 192.168.0.20) groppalbero (a linux machine in my second office with vpn address 192.168.0.40) imac(a mac machine in my first office with vpn address