similar to: Samba PDC + BDC using LDAP

Which among these three motherboard is the best supported in Linux (Centos/Ubuntu) ? Intel? Desktop Board DH55HC [ http://ark.intel.com/Product.aspx?id=42409 ] Intel? Desktop Board DP55WG [ http://ark.intel.com/Product.aspx?id=40078 ] Intel? Desktop Board DP55KG [ http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm] Also which will be a good processor , for using

Been working this for over a month now and I'm stumped. Everything was working until the 'crash'. Backup was no good so I did a fresh install of centos 5.5. Trying to get things back like they were but its been a really long time since I had to set things up from scratch, Redhat 2.0. My centos server acts as a gateway/firewall/router for my home network. Internal machines can access

Hi: I''m trying to configure Puppet on Ubuntu, and strangely I am never able to generate a certificate because my server never shows any pending certificate requests. Put differently, on the server I am running puppetmasterd and on the client I am able to connect to the server, but the client continues printing notice: Did not receive certificate warning: peer certificate

I have upgraded form 5.4 to 5.5 . after that i 'm having problem with nautilus .... some strange errors like "not on the same file system" occurs during file operation like moving deleting etc..... after that i did a fresh installation of 5.5 . then aslo same problem .. does anyone experienced such a problem ?? Now i'm using 5.3 . Also the Bind DNS server in 5.4 and 5.5

Hi Ashish, I have tested with your xml in the first mail, and it works for rx_queue_size(see below). multiqueue need to work with vhost backend driver. And when you set "queues=1" it will ignored. Please check your qemu-kvm-rhev package, should be newer than qemu-kvm-rhev-2.9.0-16.el7_4.2 And the logs? tx_queue_size='512' will not work in the guest with direct type interface,

On 10/26/2017 10:38 AM, Ashish Kurian wrote: > Hi Yalan and Michal, > > Thank you for your response. So what I understand is that I can change > rx_queue size even if I use direct type interface and qemu driver as long > as the driver is virtio. Am I right? Yes. > If that is the case why am I getting > the error saying that > > error: XML document failed to validate

Hi, Which is the recommended filesystem to be used for the bricks in glusterFS. ?? XFS/EXT3/EXT4 etc .???? Thanks & Regards, Bobby Jacob Senior Technical Systems Engineer | eGroup P SAVE TREES. Please don't print this e-mail unless you really need to. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Ashish, IMO, it is yes, no way to increase tx_queue_size for direct type interface ------- Best Regards, Yalan Zhang IRC: yalzhang Internal phone: 8389413 On Thu, Oct 26, 2017 at 3:38 PM, Ashish Kurian <ashishbnv@gmail.com> wrote: > Hi Yalan, > > In the previous email you mentioned "tx_queue_size='512' will not work in > the guest with direct type

Hi Michal, What I found was that when I restarted the machine and did a virsh edit command to see the xml config, I see that it is was not actually changed. This suggests why I saw 256 again after restarting. So now I tried again to edit the xml via virsh edit command and used the following to set the parameters. <driver name='qemu' txmode='iothread' ioeventfd='on'

Hi All, I am having issue when trying to build a custom kernel in CentOS 4.4. Current Kernel Version is 2.6.9-42.ELsmp and the server is HP Proliant DL380 G3. I downloaded the source rpm and then installed it. Gave the command, rpmbuild -bp --target=i686 /usr/src/redhat/SPECS/kernel-2.6.spec. But it throws me an error after patch operations. The following is the error.

Hi all, I ve setup a queue with 2+ agents for managing our inbound calls from customer. Using Asterisk 1.2.18 in a CentOS box. Agents login using AgentCallbackLogin application and I use a BASH AGI to accomplish this as there are some validations done with MySQL DB. Im aware that transfer could be done with option 't' in the queue() application and I was able to successfully transfer

I am trying to change the localSID for a SAMBA server, however I am unable to. I have tried the command "net setlocalsid" to no avail. To troubleshoot I have also stopped the smbd and nmbd services, but this did not help. Any help would be great! root at TheWiggle:~# net getlocalsid SID for domain THEWIGGLE is: S-1-5-21-748580849-194208185-3916830000 root at TheWiggle:~# net

Hey all, I've setup a simple page that just displays a live webcam stream of me at work, and it supposedly falls back onto Cortado if your browser doesn't support the <video> tag. The URL is here: http://media.basilgohar.com/stream/ There's been a lot of talk about live streaming and low bitrate streams. Here is my command line (I've posted this before): time ffmpeg -f

Few of my puppet clients (puppet 0.24.8, ruby 1.8.5, facter 1.5.2) are dying with out any error messages on on syslog. I cannot see much system resource usage on these nodes. What is the best way to troubleshoot the root cause of the problem? -Basil -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email

Hi, Is there a way that we can add custom IP-Tables rules in a nat'd physical host? I need some custom rules mentioned in physical host to access some services in the guest systems. Any hints on this? Regards, Kurian Thayil. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey Theorans, Yesterday and today I decided to try out broadcasting a video stream using Theora from my computer's built-in webcam. I was pleasantly surprised to find that, while maintaining a rate of less than 150kbps, the stream was of quite a suitable quality sending 640x480 video at 15 frames per second. For now, this is video only, by the way, I did not include any audio in the stream

Dear Users/Developers, I am using a KVM Ubuntu VM as a degrader to apply specific delays to incoming packets. As the delay for my packets can be higher than 7.5 seconds, there is not enough buffer on my interface to buffer all the packets. Therefore those overflowing packets are dropped in the machine and not forwarded. When I tried to use the command ethtool -G ens8 rx 512 to increase the

Hi All, We have installed CentOS 5.3 x86_64 in an HP DL585 server with AMD Opteron 64 bit processor and 16 GB RAM. The kernel version is 2.6.18-128.el5 . Now this has thrown an error message in /var/log/message, Jul 3 21:41:11 db1 kernel: EDAC k8 MC0: general bus error: participating processor(local node origin), time-out(no timeout) memory transaction type(generic read), mem or i/o(mem

Hi All, Is there a way that I can include call dialing functionality in a webinterface. I have EyeBeam configured with a SIP user say 8440. Will I be able to design an inteface which agent can choose a number and the Dial without punching in the number in Eyebeam. I tried using the .call file. ie The agent can choose which number to dial from a web interface. Then, a .call file is created with

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everyone! My name is Basil Mohamed Gohar, and I'm an avid free software user & advocate. I've been using Theora for years as I strongly believe there is an urgent need for free-as-in-freedom multimedia codecs. The recent improvements in Thusnelda encoder have encouraged me to become more actively involved, so I've joined both