similar to: LVM issue

I understand that all work is going into xen3, but I had wanted to note that aoe (drivers/block/aoe) is giving me trouble on xen 2.0.6 (so we can keep and eye on xen3). Specifically I can''t see nor export AOE devices. As a quick background on AOE, it is not IP (not routable, etc), but works with broadcasts and packets to MAC addresses (see http://www.coraid.com). (for anyone who

hi to the list, Hello everyone, I am new in the world of pxe booting and i try to use AOE to boot my linux debian lenny machines. I install the linux like this: parted -s /dev/etherd/e10.1 mklabel gpt parted -s /dev/etherd/e10.1 mklabel gpt parted -s /dev/etherd/e10.1 mkpart primary ext3 17408B 314590207B parted -s /dev/etherd/e10.1 mkpart primary ext3 314590208B 3535815679B parted -s

Greetings - I had a logical volume that was running out of space on a virtual machine. I successfully expanded the LV using lvextend, and lvdisplay shows that it has been expanded. Then I went to expand the filesystem to fill the new space (# resize2fs -p /dev/vde1) and I get the results that the filesystem is already xx blocks long, nothing to do. If I do a # df -h, I can see that the

On Thu, Jun 11, 2009 at 7:12 PM, Pallab Chakrabarty<pchakrabarty@spikesource.com> wrote: > No device created at /dev/etherd/ .. even no folder as “etherd” > > aoe-stat return nothing .. If you''re talking about domU, then it''s normal. Whatever the block device is on dom0 (/dev/etherd/*, /dev/mapper/*, etc.) domU sees only /dev/xvda (or whatever you tell it to be).

I need to setup a 3.27TB ext3 filesystem using -i 1024 and -b 1024. When I try to format this partition I get the "Filesystem too large." error. Are there any plans to update these limits? are there any patches already available that I can try out? Or am I just SOL here? (vzbu2 ~)# fdisk -l /dev/etherd/e1.1 Disk /dev/etherd/e1.1: 3600.7 GB, 3600795892224 bytes 255 heads, 63

We recently added a disk to our Coraid SAN. We''ve used tons of devices off of this SAN with Xen before, but this time we experienced some weird behavior. I configured a DomU to have the device directly offered as a disk (i.e. ''phy/dev/etherd/e1.1,sdb1,rw''). When I tried to boot it, an xvd process showed up as usual. However, it consumed 100% processor

Hello, I have encountered a crash in dom0 kernel while booting a domU from an AOE device. I haven''t seen such crashes when booting from local partitions/ LVM volumes/ loopback file systems. Also I haven''t seen such crash when I did repetitive I/O to these AOE devices. As the call trace of crash indicates the crash is in xenolinux kernel. Also this crash is predictably

I have an OCFS2 filesystem on a coraid AOE device. It mounts fine, but with heavy I/O the server self fences claiming a write timeout: (16,2):o2hb_write_timeout:164 ERROR: Heartbeat write timeout to device etherd/e0.1p1 after 12000 milliseconds (16,2):o2hb_stop_all_regions:1789 ERROR: stopping heartbeat on all active regions. Kernel panic - not syncing: ocfs2 is very sorry to be fencing this

Dear all: I''m sorry I crossmail. I try setup aoe-vblade server on netbsd 5.0.2(domU) and I try to do some stress test with for i in {65536}; do dd if=/dev/zero of=/dev/etherd/e?.? bs=4K;done on a Linux box Two Xen dom0 configurations I use: 1. 32bits SuSE Enterprise Linux 11sp1 2.6.32.12-0.7-xen with 32bits Xen 4.0.0_21091_04-0.2.6 2. 64bits Gentoo 2.6.32-xen-r1 with 64bits Xen 4.0.0

Hi I install CentOS 5.4 and try to use Xen.... But when I deploy some VM with Virt-manager and specify 2 or more VCPUS to use, when start the vm it start with just one CPU... On this VM I install Windows 2003 Server... This the file of VM: name = "Avision" uuid = "625139bf-1ad3-86fc-45e6-e8efbb9db643" maxmem = 2048 memory = 2048 vcpus = 4 cpus = "0,1,2,3" builder =

I have a Fedora Core server running: Fedora Core release 4 (Stentz) kernel version: 2.6.15-1.1833_FC4smp ( I have also tried kernel version: 2.6.16-1.2108_FC4smp) I compiled the ocfs2 and ocfs2-tools using the following steps: # MODULES: tar zxvpf ocfs2-1.2.1.tar.gz cd ocfs2-1.2.1 ./configure make make install # TOOLS: tar zxf ocfs2-tools-1.2.1.tar.gz cd ocfs2-tools-1.2.1 ./configure

Guys, I have setup my hard disc with 3 partitions: 1- 256MB on /boot; 2- 2GB on / for my dom0 (Debian 5.0) (eth0 default bridge for guests LAN); 3- 498GB exported with vblade-persist to my network (eth1 for the AoE protocol). On dom0 hypervisor01: vblade-persist setup 0 0 eth1 /dev/sda3 vblade-persist start all How to create a CVLM VG with /dev/etherd/e0.0 on each of my dom0s? Including the

I am running the Eucalyptus 2.0 cloud computing platform on an up-to-date CentOS 5 using the xen hypervisor. While attempting to attach a volume successfully created using jclouds with eucalyptus to a running VM instance, I encountered the following error: libvirt: Requested operation is not valid: Xm driver only supports modifying persistent config (code=55) i also tried attaching

Hi, I'm pretty new to ocfs2 and a bit stuck. I have two Debian/Squeeze (testing) machines accessing an ocfs2 filesystem over aoe. The filesystem sits on an lvm2 volume, but I guess that is irrelevant. Even when mostly idle, everything accessing the cluster sometimes hangs for about 20 seconds. This happens rather frequently, say every 5 minutes, but the interval seems irregular while the

I am trying to mount the same partition from a KVM ubuntu 8.04.1 virtual machine and on an ubuntu 8.04.1 host server. I am able to mount the partition just on fine on two ubuntu host servers, they both talk to each other. The logs on both servers show the other machine mounting and unmounting the drive. However, when I mount the drive in the KVM VM I get no communication to the host

I''ve been brainstorming... I want to create a 2-node HA active/active cluster (In other words I want to run a handful of DomUs on one node and a handful on another). In the event of a failure I want all DomUs to fail over to the other node and start working immediately. I want absolutely no single-points-of-failure. I want to do it with free software and no special hardware. I want

Hello, I want to know if there are some functions or packages to solve differential and integral equation using R. Thanks. Shao chunxuan. [[alternative HTML version deleted]]

In a prior message I documented my woes in getting an NFS_ROOT xen going. I haven''t resolved those yet, want to try a different tack at this: If the group were to recommend a path of least resistance to showing migration/live migration, which configuration would it be? Joe. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

I''ve installed debian lenny amd64, it is frozen now. I''ve install kernel for xen support but it doesn''t start. It says "you need to load kernel first" but I''ve installed all the packages concerning xen, also packages related to the kernel. Perhaps lenny doesn''t support xen anymore? Any solution?

Hello, I''m getting many "Error getting mfn" on a xen4.1.3 with dom0 3.4.11 x86_32. I thought it could be related to xen/mmu: Release just the MFN list, not MFN list and part of pagetables. http://git.kernel.org/?p=linux/kernel/git/konrad/xen.git;a=commit;h=785f62314984ea3af9dd830b020289ba2509ae69 (XEN) Freed 212kB init memory. (XEN) mm.c:908:d0 Error getting mfn 2009b (pfn