similar to: Xen cpu requirements

If I type "xm console 6", say (when I have a virtual machine 6 running), what should I get? The documentation seems to indicate that I should get something that behaves like a telnet to a serial console. What I actually get is a connection that might show me a couple of lines of output that do look like they belonged on the console, but doesn't seem to accept any input (except that

First, it fails because the destination directory doesn''t exist. Then it fails because it DOES exist. I really expected one of those to work. So, what am I confused about now? (Running 2008.11) # zpool import -R /backups/bup-ruin bup-ruin # zfs send -R "zp1 at bup-20090222-054457UTC" | zfs receive -dv bup-ruin/fsfs/zp1" cannot receive: specified fs (bup-ruin/fsfs/zp1)

If I can log in to the guest through the console, I can of course find out what IP DHCP has assigned it. If I configure a static IP I can of course connect to the system there (if it runs services, the firewall allows it, all the usual caveats). Does there happen to be any way to determine from dom0 what IPs are participating in the network and which guests they belong to? (I'm configuring

Using Centos 5.2 with Xen. I'm making a group of nodes behind an LVS load-director to perform computing services. Those nodes are only accessible from the LVS nodes (I'm using LVS NAT mode). Actually it's Xen virtual servers on the physical nodes behind the LVS boxes that I'm mostly concerned with. When you create a guest with virt-install, there's a vnc param and a vncport

I''ve lucked into some big disks, so I''m thinking of biting the bullet (screaming loudly in the process) and superceding the SATA controllers on my motherboard with something that will work with hot-swap in Solaris. (did I mention before I''m still pissed about this?) I have enough to populate all 8 bays (meaning adding 4 disks to what I have now), so the 6 ports on the

What about the Asus M2N-SLI Deluxe motherboard? It has 7 SATA ports, supports ECC memory, socket AM2, generally looks very attractive for my home storage server. Except that it, and the nvidia nForce 570-SLI it''s built on, don''t seem to be on the HCL. I''m hoping that''s just "yet", not reported yet. Anybody run Solaris on it? Or at least on any

My full backup script errorred out the last two times I ran it. I''ve got a full Bash trace of it, so I know exactly what was done. There are a moderate number of snapshots on the zp1 pool, and I''m intending to replicate the whole thing into the backup pool. After housekeeping, I take make a current snapshot on the data pool (zp1). Since this is a new full backup, I then

I've got a Centos guest and a Windows 2003 server guest running in Xen under Centos (5.2 in both cases), and they can get out to the network, and I can ping them from dom0. This is my first Xen install, and I haven't used Linux as a router before (I'm very familiar with it as a webserver and development platform) so I'm a bit weak on the bridging code and NAT / IP masquerading.

I've got small numbers of connections moving through a load balancer configured in NAT mode. So I've got an iptables table called "nat", which has in it a line "-A POSTROUTING -o eth0 -j MASQUERADE" (lan connect is eth0, private lan inside the cluster is eth1). The load balancer is working; connections made to the virtual ip on that host do get routed to one of the

I was recently evaluating much the same question but with out only a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced

Solaris and/or ZFS are badly confused about drive IDs. The "c5t0d0" names are very far removed from the real world, and possibly they''ve gotten screwed up somehow. Is devfsadm supposed to fix those, or does it only delete excess? Reason I believe it''s confused: zpool status shows mirror-0 on c9t3d0, c9t2d0, and c9t5d0. But format shows the one remaining Seagate

Had some trouble getting Centos x64 installed as a guest in my new Centos 5.5 x64 server using Xen (thanks again for all the help getting the hardware virtualization turned on and confirmed yesterday!). When I chose OS Linux, and whatever they called the detailed OS subtype I chose the Red Hat Enterprise 5.4 and greater, and then tried to install Centos 5.5, the install started and I got into the

Looks like just starting the nfs service turns on V2, 3, and 4 (based on reading the script, reading the man pages, and looking at the ports using netstat -l). However, I can connect using -t nfs in the mount, and -t nfs4 fails. I don't believe this is a firewall issue, internal IPs are fully open to each other according to an early rule in iptables. $ sudo mount host03:/home/ddb /mnt/ddb

It appears that the liveCD (CentOS-5.2-i386-LoveCD.iso that I downloaded late last week) does not contain either netcat or tcpdump. Given the frequent use of a livecd for testing and debugging, those would seem to be key tools that should be available. Obviously a LiveCD can't contain everything anybody might ever want, but I'd give those two tools a pretty high priority; certainly much

The virtualization manual doesn't seem to say; does one have to do anything to get the Centos 5.5 paravirtualization drivers installed? Or is it sufficient to specify a paravirtualized guest, and the Centos install will then detect that and load the right things? And, is there a way to check in the guest that the right drivers are loaded? What are they? -- David Dyer-Bennet, dd-b at

Every time I touch something, pieces fall off! It's a good thing this stuff isn't in production yet (for me I mean). So I had an LVS, configured with Piranha, directing http test transactions across two servers. I used Piranha to add another realserver. It appeared in the lvs.cf file, but didn't appear in the ipvsadm output. So I stopped and restarted Pulse. And now *none* of the

I?ve spend a few hours reading through the forums and wiki and honestly my head is spinning. I have been trying to study up on either buying or building a box that would allow me to add drives of varying sizes/speeds/brands (adding more later etc) and still be able to use the full space of drives (minus parity? [not sure if I got the terminology right]) with redundancy. I have found the ?all in

find duplicate filenames in a folder find | perl -ne 's!([^/]+)$!lc $1!e; print if 1 == $seen{$_}++' find duplicate filenames in a folder recursively ? how?

On Sat, February 7, 2009 14:32, Alan.M.Wright wrote: >>> Also, does this end up taking up extra metadata space compared to not >>> having to have an ACL entry for each file? > > No, ZFS only stores ACLs. It doesn''t have or store a separate > representation of the UNIX permissions bits. So I won''t worry about it. I still worry when I see 11 ACL

I made the mistake of looking at disk IO numbers in two different ways -- now I'm confused, because they give inconsistent answers. First way was using 'vmstat 10'. This gave me (apologies for wrapped lines): r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 2162944 4071928 162444 4218456 0 0 0 286 1103 528 3 2 95 0 0 1 0