similar to: qemu

Hi, I am using my machine as a Bridge and running transparent proxy on it. My question is - where the brdige will work? Do brdige will forward the packet before it reaches to iptables rule? If yes then what is the solution - as I want to use my machine as Transparent proxy and I have setup iptables rules on it. I have tried so many times - look at the tcpdump also - but it seems that packets

Hi, I've created a bridge using 2 interfaces and have a lot of messages as follows: nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own address as source address And the operating systems is extremely slow Interfaces files : [root at localhost ~]# cat

I have a line in my kickstart file (ksdevice) # Network information network --bootproto=dhcp --device=eth0 --onboot=on # Default network to boot ksdevice=eth0 # Auto reboot (to being next install faze) reboot However its still poping up and asking me eth0 or eth1 for install? Has this operation changed? Thanks, Jerry

I need to allocate public IP address to two guest os. I have only 2 network card Interface on server. say eth0 and eth1. I set eth1 a public IP address. so it should in # vi /etc/sysconfig/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static HWADDR=00:1a:4d:83:ad:00 BROADCAST=202.127.29.0 IPADDR=202.127.29.5 NETMASK=255.255.255.0 NETWORK=202.127.29.0 ONBOOT=yes TYPE=Ethernet Question 1: do I have to

> Date: Monday, October 03, 2016 22:00:07 -0400 > From: TE Dukes <tdukes at palmettoshopper.com> > >> From: Gordon Messmer >> Sent: Monday, October 3, 2016 4:25 PM >> >> On 10/03/2016 04:54 AM, TE Dukes wrote: >> > I can get the guest to access the internet but have tried every >> > was possible to be able to access the guest from the LAN

took a couple months off due to road blocks, hoping a fresh look would allow me to use my server as desired. I have three ports, eth0-2 over two nics. I want to bond them, and then use a bridge to connect to virtual machines on the virtual host computer. Never having done this, I am confused on some parts. Here is where I am at now and any pointers helpful. Single server, centos 6.x My issue

Hello. I desire to get bridge network working using virt-manager. Centos 7 and centos 7 guest. >From researching I think I need to have a ifcfg-br0 file like this ? cat ifcfg-br0 DEVICE=nm-bridge0 STP=no TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.8 PREFIX=32 GATEWAY=192.168.1.1 IPV6INIT=no NAME=br0 ONBOOT=yes DELAY=0 Is that for sure needed ? The use that nm-bridge0 as the network name? I

hello all, I have been trying to set-up bridged network with VLAN and not able to succeed as many tutorials address only single NIC. I am trying to setup 2 guests (backtrack instance) each guest has NIC1 and NIC2. following is snippet for guest1 I am not able to get 192.168.0.2 address back on guest eth0. VIRT-MANAGER GUI : guest1-lan details radio button left side panel NIC1

Dear Centos-Virt: This is actually a second request for help on the same issue. I finally got to try what several months ago was replayed to me and no joy was to be had. I am afraid the original thread got stale and also had extra, unnecessary data in it. Guest=XP Pro, SP2 Host=CentOS5; # uname -r; 2.6.18-8.1.15.el5 VirtualBox-1.5.0_24069_rhel5-2.i586.rpm

Can i downgrade from centos 5.5 to 5.0

I have need to use the old network-scripts and not NetworkManager. I did yum install network-scripts, I have ifcfg-eth0 set for ONBOOT=yes but it is not starting on boot. What have I missed ? Jerry

CentOS-5.5 # uname -a Linux inet05.hamilton.harte-lyne.ca 2.6.18-194.32.1.el5 #1 SMP Wed Jan 5 17:52:25 EST 2011 x86_64 x86_64 x86_64 GNU/Linux Can anyone tell me why I am seeing these error message? Specifically, why is TYPE=Bridge giving Unknown connection type 'Bridge'? Jan 13 08:25:31 inet05 nm-system-settings: Loaded plugin ifcfg-rh: (c) 2007 - 2008 Red Hat, Inc. To report bugs

2015-11-12 18:07 GMT-03:00 James A. Peltier <jpeltier at sfu.ca>: > ----- Original Message ----- > | Hi, > | > | I've created a bridge using 2 interfaces and have a lot of messages as > | follows: > | > | nov 12 15:30:22 localhost kernel: br0: received packet on enp0s3 with own > | address as source address > | nov 12 15:30:22 localhost kernel: br0: received

Here is the relevant log snippet: journal: libvirt version: 1.2.8, package: 16.el7_1.3 (CentOS BuildSystem <http://bugs.centos.org>, 2015-05-12-20:12:58, worker1.bsys.centos.org) journal: failed to connect to monitor socket: No such process journal: internal error: process exited while connecting to monitor: ((null):1937): Spice-Warning **: reds.c:3036:reds_init_socket:

Hello CentOS gurus, and a belated Happy New Year (or an early Happy Chinese New Year). I'm in the process of building a CentOS-6 KVM host machine whose only function will be to run four independent 'm0n0wall' firewall guest instances. I have a couple of quad-port Intel NICs to provide four WAN-side and four LAN-side ports, which will not be shared with any other guests. Remote

I have 3 nics in a NATed gateway file server. Two nics (eth1, eth2) provide dhcp and nfs services to an internal subnet via a dedicated switch. The other nic (eth0) connects to an external WAN switch to provide net access to the systems in the subnet. --- eth1 WAN switch eth0 --- | SUBNET switch --- eth2 Question: Is it

Hi, I'm trying to configure a network bridge over a bonding without any success. Here is my configuration: ifcfg-eth0: DEVICE=eth0 HWADDR=00:1E:C9:E8:3F:E5 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes ifcfg-eth1: DEVICE=eth1 HWADDR=00:1E:C9:E8:3F:E7 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes ifcfg-bond0: DEVICE=bond0 ONBOOT=yes BRIDGE=br0 USERCTL=no ifcfg-bridge0: DEVICE=br0

host and guest both centos 5.5 network is 192.168.62.40 host is setup as follows [root at cloud2 ~]# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:64:12:10:D9 inet addr:192.168.62.199 Bcast:192.168.63.255 Mask:255.255.254.0 inet6 addr: fe80::21a:64ff:fe12:10d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1705488

Running CentOS 5.4 x64. Have successfully bridged eth2 with br2 by following the instructions here: http://wiki.libvirt.org/page/Networking (under the RHEL section) Have been running several KVM VMs successfully via this bridge. I am now trying to bridge additional interfaces by using the same routine. Each bridge is named to correspond with the ethX device its bridged with. Example of

Hi    We are extremely happy to announce ConVirt 1.1 release. For details please visit : http://www.convirture.com/blog/2009/announcements/convirt-11-is-now-available/ ConVirt Team. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users