similar to: NFS exports network mask

Hi, I have the following newbie question, it is possible have two (or more) domains in the same IP subnetwork (e.g. 192.168.10.0/24)? I understand that is not possible have two PDC for the same domain in the same subnetwork, but I'm not sure what happens if we have two domains. Thanks for your help. Regards, -- Mauricio Strello C.

Hello all, Name is Andrew and in desperate need of some info. Setup: - Mandrake 9.1 with three interfaces (eth0 --> WAN) C-class /28 network (with tree virtual addresses which I am DNAT-ing to the DMZ) (eth1 --> LAN) A-class 10.0.0.0/8 (eth2 --> DMZ) A-class subnet 10.1.123.0/24 - Running stock Shorewall ver: shorewall-1.3.14-3.1.91mdk Dilemma: - LAN can not access the DMZ zone

On Sun, 11 Jun 2000, David Summers wrote: > Thanks for the great software package! The question I have is this: Thank you :) > My goal is to set up a triangle topology VPN between three sites and run > OSPF routing on all the sites so that if a link goes down between any two > sites the OSPF routing will reroute the packets that used to go between > the sites A <-> B to A

Ok, I have played with this some more. Here is my setup. I have a local network 10.0.x.x/255.255.0.0 I have an off site network 192.168.0.x/255.255.255.0 The samba server is also my wins server and has the ip 10.0.0.2 on my local network. This is the only NIC in the Samba server. My firewall/router server shows the following from netstat -r

When using the cygwin version of rsync for archive ops on a Windows subnetwork in "local" mode as follows: rsync -a xyz //somehost/abc # Source: WinXP, Target: Win2K the correct files seem to be copied to the target machine, but the command never terminates within the cygwin bash shell. It hangs indefinitely, though it does not appear to continue using CPU or memory

I have been running a local repository on a CentOS4 server. It serves CentOS4 clients (and FC5, FC6, and SuSE10.x if I bother to mention). My current options for exports is (ro,wdelay,insecure,root_squash). The ro and insecure options were added manually and others are default. I understand 'sync' is the default although it is not shown by exportfs -v. I also found this description in

I was using a Samba server under a SUNOS 5.5.1 operative system. This SUN machine was the server of a number of Lynux (Mandrake) and Windows (95,98, XP) computers in a TCP/IP network with fixed IP numbers. We were oblied to change to DHCP recently. As our network has a huge number of computers I am running the smbd and nmbd daemos of the Samba with an identification in such a way that only those

Hi, I some problem setup networking on a opensuse 10.3, x86_64, xen 3.1.0. I have four suse 10.3, x86_64 PVM hosts running on it, they are connected via a bridge to get network. I can connect from external hosts, to the virtual machine, and from the virtual machines to the internet, no problem. But I cannot reach the dom0 from within the domU''s or vice versa. Also the domU''s

Question: If syslinux.efi is loaded locally off USB rather than via an EFI PXE option ROM boot, but on a client whose EFI firmware has TCP support, should that locally-booted syslinux.efi be able to process HTTP URLs? Initial experiments indicate "no", but why not? Purpose: My TCP-capable EFI client is on a subnetwork with broken DHCP not under my control, so I can't

Hi I have a new question. Here the situation : I use softphone on 2 computers (soft1 and soft2) located on the same subnetwork. When I register on asterisk server using soft1 with one user (e.g JOHN) which I declared in sip.conf I can register again with this same user using soft2. Is it normal ? I notice that I can pass some call from both but incoming call for JOHN user only arrive on the last

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=452 Summary: DNAT to internal network don't work with source routing and 2 uplinks Product: netfilter/iptables Version: linux-2.6.x Platform: i386 OS/Version: Debian GNU/Linux Status: NEW Severity: normal Priority: P2

Hi to all, +-------+ eth1 +-------+ | |==========| | ''network 1'' ----| A | | B |---- ''network 2'' | |==========| | +-------+ eth2 +-------+ A and B are routers # tc qdisc add dev eth1 root teql0 # tc qdisc add dev eth2 root teql0 # ip link set

Hello I''m new to the list. I installed a vserver (http://www.linux-vserver.org/) on my gentoo server As network interface is used an alias (eth1:0) eth1 is the card of my "loc" zone. eth1:0 has an address from the same subnet from the vserver I can connect to eth0 but not to the internet. From my local net everything works fine. I have an entry in "mask" for eth1

Hi folks, Sorry to trouble you all - I'm having some trouble getting tincd up and running - I suspect I'm having problems with subnets. Any help would relaly be appreciated! At the moment I'm trying to get two linux boxes, both of which are running as NAT routers for their respective networks to talk. My goal is to allow staff to connect to the corporate network from their laptops

Hi thanks Roger, I've amended my hosts.allow file to your suggested one - thanks for that. I'm still getting "Connection refused on the client cgi screen as well as in the shell it gives me UPS upsname at ipaddresshere is unavailable... Any ideas what I can try next to debug why it's not working. Also should the "allowfrom = clientIPaddresshere" line be in my monuser

Hello everyone! I'm trying to get tinc running, but couldn't make it until now... My current situation is: all tincs are connected, but there ist (almost) no traffic: Only two PCs are able to ping to another, but not to itself. Let me explain, what I'm planning to do: I've got four networks: PROM: 10.69.0.0/16 PAN: 192.168.30.0/24 (I'm afraid, I can't change PAN to

Hello there, I was hoping that maybe one of you guys could help me out with a problem I'm experiencing with tinc1.0pre7. First, I'll start with my configuration, after that I'll explain my problem. Background ---------- This is a simple, client-server situation on a private network. Both machines run the same Debian Woody 3.0 testing installation and both have identical packages

Hi, I would like to use the NFSv4 ability to create a "root" filesystem with fsid=0, so that I don't have to refer to the whole path of the exported filesystem when I mount it. However I do *not* want this root filesystem to be mountable by any host. Is that possible and how? E.g Filesystem: /exports/data1 /exports/data2 /exports/data3 /etc/exports: /exports

Hello! I have the following setup: 1) a connection to my ISP with a public IP (1.2.3.4) with the gateway 1.2.3.1 2) an allocated IP class with 64 addresses (5.6.7.192/26) 3) two LANs connected through two NICs: a) 192.168.0.0/24 on eth1 (192.168.0.1) b) 10.0.0.0/24 on eth2 (10.0.0.1) The IPs from the allocated class are all assigned to eth0. The networks are SNATed to the external IP and

Beta 1 is now available at: http://shorewall.net/pub/shorewall/testing ftp://shorewall.net/pub/shorewall/testing This is a minor release of Shorewall. Problems Corrected: 1) A problem seen on RH7.3 systems where Shorewall encountered start errors when started using the "service" mechanism has been worked around. 2) Where a list of IP addresses appears in the DEST column of a