similar to: URGENT

how could i install pkcs11 on 64 cent os 5.4 :S it always asking me for pkcs11-helper but i've already installing [root at vpn VpnSetup]# rpmbuild -tb openvpn-2.1.1.tar.gz hata: Failed build dependencies: pkcs11-helper-devel is needed by openvpn-2.1.1-1.x86_64 [root at vpn VpnSetup]# rpm -ivh pkcs11-helper-devel-1.06-2.1.x86_64.rpm uyar??: pkcs11-helper-devel-1.06-2.1.x86_64.rpm:

i am trying to install plesk but my cent os has a newer version of open ssl that is why my setup is interrupting, how could i remove open ssl ? i tryed yum remove openssl but it encounter lots of errors i want to remove only the open ssl not the related files like wget networkmanager ... -------------- next part -------------- An HTML attachment was scrubbed... URL:

My server returning an error sth. like swap = 0 then locking httpd and all other services is this normal this is a virtual machine and i give it 3 gb ram and 4cpu of i7 920 i have 1 gbit connection on this machine finally i have 4000+ clients at one time :S -------------- next part -------------- An HTML attachment was scrubbed... URL:

how could i add / remove iptable rules on cet os 5.4 final for tcp / udp base on ports -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100423/f2e3dc7a/attachment-0002.html>

how could i copy all content of a ftp directory from ftp via console to cent os 5.4 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100402/b2ba369a/attachment-0003.html>

i am adding routr options with route add -net xxx dev eth0 but when i reset computer it is not in netstat table anymore -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100329/dc3c9340/attachment-0002.html>

Firstly my gateway 217.20.xxx.1 My ip adress 188.72.xxx.189 Sub net 255.255.255.0 this settings works on fedora 12 perfect but on centos ubuntu freebsd or fedora core it is not working but on all this systems i am able to use nat, i have installed linux again and again thousands of time the given result from centos 5.4 Also as you could see there is no gateway of me on the route table

i want to pause my cent os time and date in a spesific date :D is it possible ? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20100419/6f4b5018/attachment-0002.html>

An embedded message was scrubbed... From: Niki Kovacs <contact at kikinovak.net> Subject: Re: [CentOS] iptables Date: Fri, 23 Apr 2010 21:01:29 +0200 Size: 1400 URL: <http://lists.centos.org/pipermail/centos/attachments/20100423/64275bbe/attachment-0002.eml>

i have 2 servers in a datacenter and each of them has 2 virtual machines one is linux the other is windows of wirtual machines. when i want to transfer my ip addresses between theese servers , for ex: let me say main server 1' guest windows : A main server 1' guest CentOs: B main server 2' guest windows : C main server 1' guest CentOs: D when i handle an ip of any computers ip in

is there any possibility to do this on cent os for example company one will be in the block of 10.0.0.0.1-10.0.0.255 and routed to the one of my external ip company two will be in the block of 11.0.0.0.1-11.0.0.255 and routed to the one of my external ip i just need an advice is this better on windows vpn or llinux vpn server do you advice me any server software like open vpn or sth. else thank

i have seen many times the given error, there was no log about error. Beside this my machine never uses swap i realize that when i have last 500 Mb ram it get this error and after using 5Gb of 8 Gb it decreasing like plane crash :) I've found this form and it is the same with my error : http://www.webhostingtalk.com/showthread.php?t=913156 There could be a hardware problem i am not sure , i

I'm having issues with the ifcpu[64].c32 modules. I am building a menu system (as opposed to the command line only options I was previously using) to make it easier for my boss to use PXE. I discovered the modules for auto detecting the CPU and thought hey, that's great! However, I'm having an issue where when I select to boot say System Rescue CD, it drops me to the command line

Good evening all, I''ve all but finished installing Xen 2.0.5, XenLinux 2.6.10 and Debian GNU/Linux 3.0r4 into /boot on a colo box currently (and temporarily) running CentOS. I''ve chrooted into the debian install (chroot /boot /bin/bash) and was able to set everything up, install requisite packages, install xen, etc. Now I''m at the last step and I''ve run into

Hello, I have an odd problem on a dual processor, dual core Opteron system. Obviosously it is x86_64 so should have no problem large amounts of RAM. The system has 4 GB installed (2GB on each processor). If I boot the system with a fresh install of Debian Etch it sees all the memory fine. dmesg reports: Memory: 4107008k/5242880k available (1929k kernel code, 86836k reserved, 864k data, 176k

Hi all! Doing some tests with CentOS 5.5 on a KVM virtual machine, after doing the installation, I added a second disk. But when trying to boot from it, I get the following error: --------------------------------------------------------------------- root (hd1,0) Error 21: Selected disk does not exist --------------------------------------------------------------------- The two disks are

I removed an ATA drive (/home) for a new SATA and my system would not boot. I'm guessing that it put the MBR on that drive instead of the drive that holds the / partition. What's the best way confirm where the MBR resides and, after I verify that's my problem, how I can move (or make a copy) onto a different drive? Thanks, Scott

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Doing some tests with CentOS 5.5 on a KVM virtual machine, after doing the installation, I added a second disk. But when trying to boot from it, I get the following error: - --------------------------------------------------------------------- root (hd1,0) Error 21: Selected disk does not exist -

Hello, I have an odd problem on a dual processor, dual core Opteron system. Obviosously it is x86_64 so should have no problem with large amounts of RAM. The system has 4 GB installed (2GB on each processor). If I boot the system with a fresh install of Debian Etch it sees all the memory fine. dmesg reports: Memory: 4107008k/5242880k available (1929k kernel code, 86836k reserved, 864k data, 176k

Hello, I have two disks sda and sdb. One of the was broken so I have changed the broken disk with a working one. I started the server in rescue mode, and created the partional table, and added all the partitions to the software raid. *I have added the partitions to the RAID, and reboot.* # mdadm /dev/md0 --add /dev/sdb1 # mdadm /dev/md1 --add /dev/sdb2 # mdadm /dev/md2 --add /dev/sdb3 # mdadm