similar to: How Do I ...

Hi All :) I have three servers, all with centos 7 installed 3 days ago. I need on them "old" naming scheme (ethX) for network interfaces, because of that: # grep GRUB_CMDLINE_LINUX /etc/sysconfig/grub GRUB_CMDLINE_LINUX="rd.lvm.lv=centos_node-XY/swap rd.lvm.lv=centos_node-XY/root rhgb quiet ipv6.disable=1 net.ifnames=0" net.ifnames=0 was added and afterwards I ran:

Hi all, I have one bridge system (used for controlling bandwidth) connected to three different DSL ISP provider. I have the following setup below: - +-------------+ | br0 | | -> eth1 | -> DSL_1 | -> eth2 | +-------------+ | br1 | | -> eth3 | -> DSL_2 | -> eth4 | +-------------+ | br2 | | -> eth5

Hello newsgroup, I hope somebody with more routing experience then me can help me with the problem I have. The setup is as described below. A dual internet provider routing, multiple local area networks, and a dmz network with one public and one private ip range. I followed the instructions at lartc.org, and so far everything is working. The default route is via

I have a setup with two Internet providers. One circuit (net0 == eth1) is used primarily for employees and tunnels to other sites. The other (net1 == eth2) is for the production machines that customers access. Everythung works in teh sense that packets get to where they are sent (mostly) but I recently I had a sniffer on the system and noticed a problem I cannot solve. traffic coming in

Hi, I met a problem when using bridge with netfilter. The kernel version 2.4.20, and the patch is bridge-nf-0.0.10-against-2.4.20.diff. Our firewall configuration is as follows, eth3,eth4,eth5,eth6 configured as a bridge with an IP address 10.0.0.1. The local net connect to the internet via the gateway 10.0.0.1 and SNAT is applied on the firewall. It worked but sometimes there are some

Hi, i have a question if linux is able to do the same thing that commercial wan simulators do (which cost 7000 $ or more). Basicly i want to use the following setup. Linux Router Machine 192.168.0.1 192.168.1.1 Eth0 192.168.10.1 Eth5 192.168.2.1 Eth1 192.168.100.1 WEB Server. 192.168.3.1 Eth2

I have a server with 4 nics. Two are using different internet connections, both with static IP's, and two are connected to our private network. The two internet facing nics seem to be battling over the gateway designation. Which ever I designate as the gateway the other stops responding to incoming traffic. I need both to listen to inbound traffic. One for our main web page and the other

Hi, I don't have ifcfg-eth1 in my /etc/sysconfig/network-scripts. But when I do ifconfig eth1 I can see output as below. If I do ifconfig eth12 , I don't see anything which i am assume is normal. eth1 Link encap:Ethernet HWaddr 00:24:E8:44:DB:CC BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0

hi, I have to configure Xen server and DomU''s which should be able to talk to different vlans - depending on services put on DomU''s. I would like to enslave 2 NICs via bond interface. Both NICs are on trunk ports which are configured in the same way, the same native vlan. I don''t know, if I have to add vlans tagging to eth* interfaces then enslave tagged eth*

I have been studying Tom''s configuration at: http://www.shorewall.net/myfiles.htm -and- http://www.shorewall.net/NAT.htm I am using SBC as an ISP and also have 5 "real" IP addresses and because of other issues, have to re-do my set-up. If I have a block at .120/29 assigned to me, what SBC does is give you 5 usable addresses, in my case .121 is the SBC modem/router and

Currently my ethernet bridge has 2 intel 100mps NIC's that are both part of a bridge. ( I followed the sample setup on the bridge.sf.net page.) In addition to this I would like to access the internet from within the ethernet bridge and when using the sample instructions I have no gateway setup and no default route (0.0.0.0). I know this data has to be attached to the bridge device and not to

Hello, I''m new to Xen (and this mailing-list) and facing some problems with the network. I''m stuck and don''t know how to continue. And Google isn''t very helpful either... My setup: - Ubuntu 7.10 for dom0 and Debian 4.0 for all domU - 4 physical NIC (DHCP from my ISP, internal LAN, DMZ & WLAN) - 1 Dom as firewall/router - 1 domU with internal services

Hi, I was asking about php 5.2 because I would like to use this program with these requirements: http://www.magentocommerce.com/system-requirements This ecommerce store is built with the zend framework and requires php 5.2. Mcrypt is not in the centos mirrors either. I did manage to get this beta ecommerce store installed on php 5.1.6-12 by removing the mycript line in the install xml file and

Hi all, First of all I repost this email in shorewall list as there are a lot of firewall experts here that might know what the hell i going on. We have also posted this on the linux bridge list (we needed acceptance first) and leaf list. Very thankful for your understanding. We are experiencing a very strange problem and would need some help. We have a Leaf / Shorewall based box (actually

I''m having another little problem with my new firewall. I want outgoing port 25 from my mail server to appear on the address 65.223.121.227 so I created the file masq: eth2 192.168.124.18 65.223.121.227 tcp 25 eth1 eth5 eth1 eth3 eth1 eth4 eth1 == net0 == 209.189.103.196/27 eth2 == net1 == 65.223.121.237/28 eth3 == dmz0 eth4 == dmz1 eth5 == loc ==

I have a number of machines that have 4 NICs, two of which are actually in use, running Centos 5. When they are rebooted, they seem to change the eth interface names, assigning them in different orders. I'm a little fuzzy on the details because they are at a remote location and I can't access them easily - especially after the network breaks. Shouldn't: alias eth0 bnx2 alias

Hello all, I am new to Linux Ethernet bridging. Let me first start with what I am trying to achieve. Well you see - I am attempting to have 2 main firewall running at the same time - one as a master and the other one as a slave. Yes, I would like to make use of Ethernet bridging in this scenario - as I understand it, all I need are two machines and STP enabled. I am running Debian

Hi On a multihomed box how can i set different gateways for each NIC? Setting them in the ifcfg-ethx does not seem to make any difference to the routing? thanks

Hi i have read the all the docs and try to deploy the load balance and QoS using my 4 links (DSL links) My setup looks like below LAN ----Local IP-----Connected to Linux Box Eth1 Eth5-- connected to one DSL1 Eth4-- connected to one DSL2 Eth3-- connected to one DSL3 Eth2-- connected to one DSL4 iam marking them in prerouting randomly and puting them in table and snating at POSROUTING

Hi In our office environment few servers mostly database servers and yesterday it happened for one application server(first time) the partion is getting "read only". I was checking the archives, found may be similar kind of issues in the 2007-July archives. But how it has been solved if someone describes me that will be really helpful. In our case, just at the problem started found