similar to: 12-15 TB RAID storage recommendations

I have a rather large box (2x8-core Xeon, 96GB RAM) where I have a couple of disk arrays connected on an Areca controller. I just added a new external array, 8 3TB drives in RAID5, and the testing I'm doing right now is on this array, but this seems to be a problem on this machine in general, on all file systems (even, possibly, NFS, but I'm not sure about that one yet). So, if I use

Hello everyone, This is not directly related to CentOS but still: we are trying to set up some storage servers to run under Linux - most likely CentOS. The storage volume would be in the range specified: 8-15 TB. Any recommendations as far as hardware? Thanks. Boris. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello: I am looking for a recommendation for a PCI-e RAID card for my server. The server has a PCI-e x16 low profile slot so the card has to be at most 6.6 inches long x 2.536 inches high. I would like to use RAID 5 with 3 drives so I have to have those capabilities. It has to be CentOS 5.4 compatible (Of course!). I took a look at the offerings from 3Ware, but their cards are too long. If

Hi list, Due to possible budget cuts, I am looking at finding alternatives to the Netapp filers we currently have. Obviously, one of the key drivers is the performance required for our specific application. On https://www.fotoloog.org/fs.png you can see the load on our main filer. The key question I have is: looking at that graph, do you think it is worthwhile looking into Samba further as a

Is anyone running either the newish Adaptec 5805 or the new LSI (3ware) 9750 sas raid controllers in a production environment with Centos 5.3/5.4? The low price of these cards makes me suspicious, compared to the more expensive pre-merger 3ware cards and considerably more expensive Areca ARC-1680. I've been 'burned' by the low cost of Promise raid cards (just as this group pointed

We have several CENTOS 4 and 5 servers. ALL CENTOS servers have NTP setup to sync time server. Several days ago due to power outage all servers are reboot. Due to DNS server did NOT up quickly, CENTOS servers start up and can NOT find time server. For CENTOS 5.X servers, it did quickly resync to time server after 30 minutes. For CENTOS 4.X servers, it have been 3 days still NOT sync to time

Hi all, My 5.3 DVD is ruined and the 5.4 installer won't run on my box w/o errors (uts not the disk, something to do with the installer itself). I usually just install 5.3 and then yum it to 5.4. Does any one know were I can find a 5.3x64 iso file? - aurf

I have a new instllation of tomcat on centos. My $CATALINA_HOME is /usr/share/tomcat5 and tomcat is running. http://localhost:8080 brings up the tomcat page & one of the option is "Administration". I would like to use this web interface and even give some of the test webapp users ability to restart tomcat. According to the home page, users are defined in

Greetings, I am looking for a hardware raid card that supports up to 4 SATA II hard disks with hot swap (compatible raid cage) I have short listed two LSI/3Ware cards: 1. 9750-4i 2. 9650SE-4LPML Both appear to be well supported in Linux. I would appreciate your personal experience with the CLI tools provided by LSI. Can they be configured to send email for disk failures or SMART errors? Is

I just recently upgraded a box from i386 5.3 -> 5.4. The box has heartbeat packages installed from "extras:" heartbeat-pils-2.1.3-3.el5.centos heartbeat-stonith-2.1.3-3.el5.centos heartbeat-devel-2.1.3-3.el5.centos heartbeat-2.1.3-3.el5.centos The heartbeat daemon no longer starts.. the init script reports a success, as well as the logs: May 4 22:33:10 fc-fmcln02 heartbeat: [9344]:

Hi, I've got a new server with a 3ware 9550SXU with the Battery. I am using FreeBSD 7.0-Release (tried both 4BSD and ULE) using AMD64 and the 3ware performance for writes is just plain horrible. Something is obviously wrong but I'm not sure what. I've got a 4 disk RAID 10 array. According to 3dm2 the cache is on. I even tried setting The StorSave preference to

Fellow server-builders out there, this is for you. :) I was trying to build a cheap JBOD type storage solution running CentOS. Ended up snagging a Supermicro SC826TQ-R800LPB 2U case (12 drives slots) and a Supermicro X7DBE-O motherboard. Unfortunately, without thinking I snagged a 3ware 9650SE-12ML SATA RAID card which is a full height card and thus does not fit in my case. I have a few

Hi all. We just put a relative large server in operation (for our measures ;-) ), a 4x Dual Core / Intel with 16GB Ram and a 3ware 9550SX SATA-RAID with 4 drives. Operating system for the Dom0 is an up-to-date gentoo linux. Everything runs really fine, there are 4 Domu''s running, 1x gentoo and 2x debian and 1x Windows Server 2003. DomU''s are running blazing fast in normal

Hi, We've got a fresh CentOS 5.4 box, and the only glitch so far is that /etc/init.d/smb doesn't start smbd. It claims it does - shows "[ok]" - but only nmbd ends up running. Even setting a higher debugging level in the smbd flags, nothing logs or shows on the console as to why smbd is immediatly quitting. To make it stranger, doing this works fine: . /etc/init.d/functions

Hello all, About a year ago I set up a mail server on CentOS using this howto: http://wanderingbarque.com/howtos/mailserver/mailserver.html I managed to add amavisd-new with clamav and spamassassin. It runs very well, but it runs on CentOS 5.2, and if I try to upgrade, amavisd-new and clamav break. we are now also at the point where a backup mx will need to be implemented. If necessary I am

I have a centos 6.6 laptop which is having trouble (intermittent boot failures, or more rightly so, multiple failures, intermittent booting). The laptop is running selinux. I pulled the second internal disk out to get my data off of it. I plugged it into my centos 5.x machine and mounted it. I was able to do a dir listing, but whrn I tried to cd into any of the directories, I get a bunch of AVC

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

Hi. I'm looking at deploying a freebsd 7-release server with some storage attached to an areca ARC-1680 controller. But this card is not mentioned in 'man 4 arcmsr' (http://www.freebsd.org/cgi/man.cgi?query=arcmsr&sektion=4&manpath=FreeBSD+7.0-RELEASE). Areaca's website does mention freebsd as a supported OS (http://www.areca.com.tw/products/pcietosas1680series.htm). Has

Hello listmates, I have discovered a very strange SFTP problem which I can not connect to anything but NIS thus far. See here: http://www.linuxquestions.org/questions/linux-server-73/sftp-seems-to-fail-for-nis-accounts-under-openssh-5-x-816020/ http://readlist.com/lists/suse.com/suse-linux-e/38/193419.html Hence the question: is NIS (YP) still in use much anywhere for authentication? Thanks.

Hello listmates, As some of you may know we have been having a really bad problem with Realtek Semiconductor Co., Ltd. RTL-8169 cards. See here for details: http://forum.nginx.org/read.php?24,140124,140224 So now my question is, what PCI 1 Gbit/s Ethernet adapters should I use under CentOS? If you have had a consistent positive experience with any particular chipset/brand please speak up.