similar to: An odd IPMI problem

Hello! I'm trying to install Centos 6.4 64 bit on this Xserve: http://www.everymac.com/systems/apple/xserve/specs/xserve-intel-xeon-2.8-eight-core-specs.html I got a bootloader from: http://blog.christophersmart.com/2009/07/23/linux-on-an-apple-xserve-efi-only-machine/ as none of the official Centos releases (full, minimal, network 64 bit) boot on this machine. They all crash when loading

Good morning! On a CentOS 6.4 / 64 bit server I have installed the watchdog 5.5 package. The rpm -qi watchdog states: The watchdog program can be used as a powerful software watchdog daemon or may be alternately used with a hardware watchdog device such as the IPMI hardware watchdog driver interface to a resident Baseboard Management Controller (BMC). ... This configuration file is also used to

My environment is "heterogeneous" my authentication and home server are currently stuck on a 1G shared network, the production servers and storage servers are on a bonded 40G network, all are in the same VLAN. I have about 100 servers on the 40GB bonded network each with 12cores and 128GB of memory. They are running centos 6.6 Except for my storage servers they are all just running

Control: tag -1 +moreinfo On Tue, 2014-05-13 at 08:55 -0700, Mike Egglestone wrote: > After booting into kernel 3.13 dom0, the keyboard no longer works. > All other aspects work, ssh is needed to login to the system to > start working with the domU's. > They keyboard works at the grub menu just fine, and > works normal when booting into the non xen kernel. I think at a minimum

Hi all, New to the list and (mostly) new to CentOS. We have just moved from running RHEL to CentOS on our main production servers. Anyway, I am configuring a couple of new SunFire v20z servers here at the moment and trying to get the systems' management interfaces to work fully under CentOS. First issue was trying to install the openipmi RPM from the CD that came with the SunFires, this RPM

Hi all, I am trying to load kernel module ipmi_si, while failed with error "No such device", truth is I can find file in ../kernel/drivers/char/ipmi/ipmi_si.ko. So why I can't load it? Steps: # ls -l /lib/modules/2.6.32-573.el6.x86_64/kernel/drivers/char/ipmi/ipmi_si.ko -rwxr--r--. 1 root root 93080 Jul 23 2015

Hi Everyone, I have a dell 1750 server with ERA/O card running on FreeBSD 7.0-STABLE According to Dell, the ERA card supports ipmi 1.0: http://linux.dell.com/ipmi.shtml But so far no luck with freebsd :/ [root@home /usr/src/sys/i386/conf]# ipmitool -I open channel info 1 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

here is my problem: Parsing config file vir2.cfg Daemon running with PID 11570 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.0.0 (root@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Mon Oct 28 00:35:01 CST 2013 Command line: root=/dev/hda1 ro ACPI in unprivileged domain disabled released 0 pages

Hi folks, We experiencing some difficulties in getting IPMI to work on RHEL 6 running as Guest using KVM. We have verified that IPMI works on RHEL 6 if installed on bare metal. Is this a known issue? Can anyone please suggest a fix or work-around for this problem? *RHEL 6 as guest os with kvm on RHEL 6 as host os -- doesn't work* RHEL 6 (client) on bare metal (i.e., the above mentioned host

Ian Campbell <ijc at hellion.org.uk> writes: #I think at a minimum to make any progress we would need to see some #logs. Probably the dom0 dmesg (perhaps compared to the native boot #dmesg) and the set of modules which are loaded would be a good start. #Probably xen's dmesg would be useful too. Lastly, it would be good to #mention what sort of keyboard this is (USB, PS2?) # #Also the

Hallo *! I have a board SE7501HG2. - On 2.6.18 ipmitool works succefull. On Xen-3.1 (2.6.18) ipmitool say: # ipmitool sensor WARNING: Unknown SDR repository version 0x00 SDR record id 0x0000: invalid length 0 (see thread [ipmitool-devel] Unknown SDR version) - On page [4] as written: ipmitool -> BMC ---> i2c/smbus ''-> SDR - On Thread [9] was written:

I'm getting the (unintelligible to me) error message ipmi_si: Could not set up I/O space ERST: Failed to get Error Log Address Range when I try to boot any OS on the grub menu apart from the one I last installed. (Actually, Windows also boots properly.) I wonder if anyone has had this error message, and worked out where it comes from? I googled for it, and it has come up many times; but

On Thu, Jul 12, 2018 at 07:27:58PM -0500, Chris Adams wrote: > > Default Gateway IP : 192.168.0.100 > > Default Gateway MAC : 00:25:90:0a:42:87 > > No, that does not look right. You have configured the gateway of the > IPMI to be the host OS side of the NIC. You can't do that... in a lot > of systems I've seen, the IPMI side of the NIC can't even

-> Is there a way to get a date stamp for the dmesg? At least on CentOS7: dmesg -T ----- Original Message ----- From: "Dan Hyatt" <dhyatt at dsgmail.wustl.edu> To: "CentOS mailing list" <centos at centos.org> Sent: Tuesday, October 18, 2016 1:36:46 PM Subject: [CentOS] Lockd: failed to reclaim lock for pid ... My environment is "heterogeneous" my

Greetings all, I am looking for a solution to use IPMI (BMC) in with LibVirt (Virt-Manager). Actually there is a Customer behind this request as well. Trying to be short: We are looking for a Solution in OpenStack Environment. Customer wants to have the entire environment running in Virt-Manager (probably for a P.O.C or tests purposes). So here is what he is trying to do: http://red.ht/1HfNn9r

Is there a little setup display right on the box? Just asking because I have seen that on some boxes. Cheers, Boris. On Sun, Sep 18, 2016 at 12:15 AM, Keith Keller < kkeller at wombat.san-francisco.ca.us> wrote: > On 2016-09-17, Alice Wonder <alice at domblogger.net> wrote: > > > > Okay if it requires DHCP this might be out, I'm currently out of town > >

Hi, I hope somebody can help me with this problem. I don't know whether it's a problem with my configuration or a bug or feature in extlinux. I am using an IPMI 2.0 serial-over-lan console to connect to a system with an Intel S3200SHL motherboard. The first line of my extlinux.conf file looks like this: serial 0 57600 0x003 I am using ipmitool to access the console, like so:

Hi, Thanks for your help. On Mon, Nov 11, 2013 at 08:00:47PM -0800, H. Peter Anvin wrote: > There is no reason by Syslinux would reboot the system on a serial > disconnect. There could be a bug, of course; now, Syslinux 4.05 is > pretty old so unless you can reproduce this on a current version that > would be useful. I am using 4.05 because that's what's packaged in the

We have recently been asked to evaluate some computing machinery for a new project. This particular end user has very limited experience with the stated security requirements in a lights-out environment. Their primary work (as well as mine) in the past has been with very small, simple networks of desktop machines and a few servers with extremely limited access.? For the most part, their admins

Ian Campbell <ijc at hellion.org.uk> writes: #Please boot with loglvl=all on the hypervisor command line for this too. No problem Ian, Here are some results with (now) the latest BIOS version 41. (was version 35) This is a fresh new install of Debian "Testing" non production server. Just wanted to run some test domU's. Changing USB ports, no effect. I even tried a different