similar to: Samsung f3 hd502hj and Centos 5.4

Hi, I''ve got similar problem - after HW failure - two of three disks became unavailable and now I''m unable to btrfsck. Btrfs lays on /dev/sdb1,/dev/sdc1,/dev/sdd1 - sdc+sdd became unavailable Here is kernel log: ============================================ Mar  9 23:56:28 ftp2 kernel: [121492.593338] ata7.00: exception Emask 0x60 SAct 0x1 SErr 0x800 action 0x6 frozen Mar  9

I've tested both 6.3 and 7.0-RC2, amd64 architecture, and have found the occurrence of an interrupt storm using an ASUS A8N-SLI Premium (nForce 4) motherboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA

Hello, I''m running 6.26-2-xen-amd64 with xen-hypervisor-3.2-1-amd64. Now I try to pass through a controller card to WHS, at the moment without success because the card isn''t present in DomU. At the first moment I guess it''s a windows problem ;) so I''d tried to boot a Knoppix .iso but same problem there, the passed through device isn''t present in DomU.

Hi, Is there a way to tell / narrow down if an issue with errors like below are due to a bad cable or bad port multiplier ? The disks in a particular cage are throwing errors like these below. (RELENG9 from today) siis0 at pci0:5:0:0: class=0x010400 card=0x71241095 chip=0x31241095 rev=0x02 hdr=0x00 vendor = 'Silicon Image, Inc.' device = 'SiI 3124 PCI-X Serial

Hallo, "never change a running system" ... For some months I run btrfs unter kernel 3.2.5 and 3.2.9, without problems. Yesterday I compiled kernel 3.3.4, and this morning I started the machine with this kernel. There may be some ugly problems. Copying something into the btrfs "directory" worked well for some files, and then I got error messages (I''ve not

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

hi, we've got a server with 6 sata disk (2 system raid1, 4 data raid5). recently we've got such error is the log and in these case the system is totally hang ie. it seems to crash but after 30-40 sec is start to working. we already 2 times replace the sata cables the problem still arrise what's more with different data disk (so not the same). we assume it can be some kind of sata

Use syslinux 6.03 for my g4l disk imaging project, and it works great. Have just had a user that has a new thinkpad t440p system and it load the syslinux, and he can select any of the various kernels included on the iso, but it freezes at a point with no error message just stops? Originally, the last thing ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 But I built a special kernel with all the

Hey, just bought an eSATA/USB dual drive docking station and my CentOS 5 can only see one drive at a time... Any one knows if there are specific parameters to set somewhere? Or do I need a more recent kernel (like upgrading to CentOS 6?) The docking is a Sharkoon Quickport Duo v2 + 2 drives + 1 eSATA cable... http://www.sharkoon.com/?q=en/content/sata-quickport-duo-v2 The eSATA controller is an

dmesg output after a resume from a suspend. the device in question was /dev/sdb mounted on /home. after a device failure to resume properly, the link is then reset by the kernel but comes back as /dev/sde. /dev/sdb disappeared entirely, and is now referred to as sde. attempted to remount rw of sde, seemed to succeed, mount/mtab said that it was rw now but i couldn''t write to the volume

On my C5 machine (a Dell XPS420) I have a 500Gb disk on the internal SATA controller. I also have a SiI3132 dual-port multi-device eSATA card. This is connected to an external SATA array of disks. Now occasionally I see something like this in my logs ata7.01: exception Emask 0x0 SAct 0x0 SErr 0x0 a ction 0x0 ata7.01: irq_stat 0x00060002, device error via D 2H FIS ata7.01: cmd

Il 24/10/2016 14:05, Leonard den Ottolander ha scritto: > Hi, > > On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote: >> === START OF READ SMART DATA SECTION === >> SMART Error Log not supported > > I reckon there's a <snip> between those lines. The line right after the > first should read something like: > > SMART overall-health self-assessment

Bugs item #15581, was opened at 2007-11-12 10:55 You can respond by visiting: http://rubyforge.org/tracker/?func=detail&atid=218&aid=15581&group_id=35 Category: Incorrect behavior Group: current Status: Open Resolution: None Priority: 3 Submitted By: Nobody (None) Assigned to: Nobody (None) Summary: Text fields crash application when F3 is pressed in them after a successful Find.

Il 27/10/2016 19:38, Yamaban ha scritto: > On Thu, 27 Oct 2016 11:25, Alessandro Baggi wrote: >> Il 24/10/2016 14:05, Leonard den Ottolander ha scritto: >>> On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote: >>> > === START OF READ SMART DATA SECTION === >>> > SMART Error Log not supported >>> >>> I reckon there's a

Hi all, I really appreciate all of you who are behind this great proyect. Im from Argentina (if you dont notice for my accent eheheh) Im trying to capture width the func Event.observe() the keys F3 and F11. Also the combinations for ALT and the arrows keys, and other combinations like: CTRL+X (cut) CTRL+C (copy) CTRL+V (paste) Using something like this: Code: Event.observe(window, keycode=122,

Dear all, Last December there was a thread regarding the famous FAQ 7.21 "How can I turn a string into a variable?" and asking what people want to do with these strings. My, certainly trivial application would be as follows: Assume I have a data.frame containing besides others also the columns f1, f2, ..., fn and I want to create a command like: apply(sapply(list(f1,f2,f3),is.na),2,sum)

Hm, well you can see the messages about failure to set plls, which is why you don't see anything. The only odd thing I see is that you're using vesa, which can definitely mess things up. Try not using that. Also try booting with nouveau.debug=debug drm.debug=0xe which might provide more relevant info. On Jun 12, 2015 8:34 AM, "Andre Campos Rodovalho" <andre.rodovalho at

Hello, I'm trying to create and boot a Win98SE-DOS OS through Hard Disk emulation. My src files are from a Win98SE 1440K floppy image file, with a x86 boot sector (dl'd from the net - I have no floppy drive and a slow net link 3.2KB). I don't know what to put into the partition boot record of my image and how to load dos.bss properly (the docs explain for floppy images not for HD

Il 17/01/2016 19:36, Alessandro Baggi ha scritto: > Il 17/01/2016 18:46, Brandon Vincent ha scritto: >> On Sun, Jan 17, 2016 at 10:05 AM, Matt Garman >> <matthew.garman at gmail.com> wrote: >>> I'm not sure what's going on with your drive. But if it were mine, >>> I'd want >>> to replace it. If there are issues, that long smart check

Hi list! I recently butchered my filesystem, and I was wondering if anyone knows how to help. Problem: My filesystem is screwed up, and I can''t mount it at all right now. In the logs, the problem begins around 45s. Background: I''m running a 6x4TB RAID5 array using md. I have a few virtual machines using said array, and one of them is a btrfs storage server. I ran into some