similar to: Installing libssl-dev

Hi; I went to install some s/w and it looked like there was a problem with openssl. So I decided to uninstall it (yum remove) and reinstall it. When I went to reinstall, I discovered I couldn't use yum. Then I discovered: [root at 13gems qmail-1.03]# yum install openssl -bash: /usr/bin/yum: No such file or directory [root at 13gems qmail-1.03]# man yum Floating point exception [root at 13gems

I have two computers: both running CentOS 6.7, 64-bit, with kernel 2.6.32-573.12.1.el6.x86_64. One is a laptop with an 2 core Intel processor and the other is a desktop machine with a 4 core AMD processor. Both with selinux enabled. I have a USB serial port device (a RR-CirKits LCC-Buffer USB). On the desktop I am getting this error: sauron.deepsoft.com% sudo minicom Device /dev/ttyACM0

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

I am trying to run my old CentOS4.8 (32-bit) system as a guest system under CentOS5.4xen (64-bit). I followed the instructions in Appendix A of the xen user manual (/usr/share/doc/xen-3.0.3/pdf/user.pdf) and created a 'disk image' (actually a 10gig LVM logical volume: sauron.deepsoft.com% sudo fdisk -l /dev/mapper/sauron-c4guest Disk /dev/mapper/sauron-c4guest: 10.7 GB, 10737418240

I am planning to increase the disk space on my desktop system. It is running CentOS 5.9 w/XEN. I have two 160Gig 2.5" laptop (2.5") SATA drives in two slots of a 4-slot hot swap bay configured like this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End

Is there a way to identify if an rpm package is unused, or how much it is used? I would like to reduce my load time by removing unused packages in my kickstart, but do not want to cause problems for users on active systems by guessing which ones are not necessary (I load everything with kickstart now). If I could find the packages are not used I could start by excluding them from a load and be

One of my VPS stopped working. After the data centre replaced a disk normal service resumed, then I notices this: CentOS release 5.5 (Final) Kernel 2.6.35.4 on an x86_64 I always thought Centos 5.x would always be on 2.6.18. Any thoughts?

Hi, for a specific application we need a low-profile SCSI card (PCI) with external 50pin connector. I thought about getting an "Adaptec SCSI Card 2930LP". However I was not able to find any usable information about wether this card is supported by Linux/CentOS 5.x or not. Does anyone have this card working with a CentOS 5.x machine? Alternatively: Are there any linux-supported

Installed version of doxygen (stock CentOS 5.9): Name : doxygen Relocations: (not relocatable) Version : 1.4.7 Vendor: CentOS Release : 2 Build Date: Mon 11 Jun 2012 04:50:22 AM EDT Install Date: Fri 07 Jun 2013 12:14:55 PM EDT Build Host: builder10.centos.org Group : Development/Tools

I recently came across the need to convert jpg images with IM, did a standard install of "yum -y install ImageMagick" and found that images converted with CentOS's base port of IM would actually corrupt the images, yet using the same (albiet different version, different distro) software didn't corrupt the images at all. By corrupted, I mean, the bottom portion of the image under

libssl.so.4 was erased by accident and now, e.g., iinvoking wget results in: wget: error while loading shared libraries: libssl.so.4: cannot open shared object file: No such file or directory [root at mail src]# How does one go about restoring libssl.so.4? [I've tried Google, compiling current edition from source, yum install, but note 'yum remove openssl' would take out about 140

I am having a problem with setting up diskless clients under CentOS 5.2. I have everything working under CentOS 4.7. This is an adaptation of the (somewhat old) Diskless Linux with PXE HOWTO by Gerd v. Egidy, originally at the URL http://www.intra2net.com/opensource/diskless-howto/, which is now defunt (there is a mirror of it at http://blog.chinaunix.net/u/2389/showart_82438.html). What I am

Can someone please help me with writing a udev rule? I need /dev/ttyUSB0 to automatically have 777 rights when plugged in. I'd like it to only apply to that one specific device. I'm not sure where to start, what files to look at and also what to write to make it work. TIA Brad This e-mail transmission contains information that is confidential and may be privileged. It is intended only

Hi; Now that it's installed, how do I start it and add a user? I can hardly believe there is *no* documentation! TIA, Victor -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20091105/78d77424/attachment-0004.html>

Hello, Presently I am running CentOS release 5.5 (Final). I am looking to setup bridging as I would like to setup some KVM virtual hosts on my system as a test lab. I am following the the instruction at this site > http://tldp.org/HOWTO/BRIDGE-STP-HOWTO/index.html but I cannot figure out where I am going wrong and would be thankful if someone could point me in the right direction. Here

I have Centos 5.2 and am trying to set up my first tape loader, a Quantum SuperLoader 3. My "cat /proc/scsi/scsi" outputs the following: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: transtec Model: PV610F16R1C Rev: 373I Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: Ultrium

I cannot install glibc.i686 on a x86_64 system because I get Error: Missing Dependency: glibc-common = 2.5-81 is needed by package glibc-2.5-81.i686 (base) glibc-common.x86_64 is installed, but it's apparently looking for i686. There's indeed no glibc-common for i686. There's also glibc.i386 and glibc-common.i386 available, but I think I don't need them. I have other x86_64

Hi; I installed mysql using yum, so I have an /etc/init.d/mysqld file. For some reason, however, mysqld doesn't boot on reboot of the machine. Please advise. TIA, Victor -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20091110/3a8a8747/attachment-0003.html>

Hi; I've learned how to add a user and change the root dir of vsftpd (which of course is undocumented). Now I need to learn how to make it so that a given user can only access his/her folder (within the root dir). Please advise. TIA, Victor -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi; Since I decided to "yum remove openssl", genius that I am (not!), I managed to screw up the OS so badly the server co. had to rebuild it for me <:-) These good people backed everything up very well, so the damage was minimal. Now I'm trying to rebuild MySQL. I did the "yum install mysql" no problem. However... [root at 13gems old]# /etc/init.d/mysqld start -bash: