similar to: Net-SNMP interfaces out of order

Hi, I've just begun putting xen domains on an etch dom0 (my other servers being sarge with backports at this time). I've noticed that when a domain is restarted or shut down, SNMP believes that the interface is still there and a new interface with the same name has been created. For example, on an snmpwalk: [...] IF-MIB::ifDescr.24 = STRING: v-deep IF-MIB::ifDescr.28 = STRING: v-isst

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING:

Hi, We are using Zenoss to monitor a number of paravirt Linux hosts (using the xen net device), it appears that an snmp query to the paravirt hosts is reporting the interface speed as 10mbit - which is significantly lower than what it really is (the dom0 host has 1gbit networking). This causes the occasional spurious error from the monitoring tool as it notices that a host is using 75% of its

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

I got itchy fingers over the weekend and decided to fix what wasn't broken and upgraded one of the older servers from Centos 5.2 to Centos 5.3. Following the recommended process of updating glibc and such before the rest, it appeared to work perfectly and rebooted without problem. However, MRTG 2.15.2 started complaining about unexpected values. I installed/updated both MRTG (2.16.2) and

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

i''ve installed mrtg to make graphics of the trafic from the interfece throw the snmpd, and the same with ipac witch put iptables accounting rules colect them and store, and gets the output, but the "problem" is that ipac graphics are 3 times smaller that the snmpd. Why??? i did catch all the trafic with ipac so no problem here, and i know that ipac/iptables is at level 3, and

Hello, I am trying to mess with a prio type qdisc, and must be missing something. Here''s my sample code: tc qdisc add dev eth0 root handle 1: prio tc filter add dev eth0 parent 1:0 prio 1 protocol ip u32 \ match ip dst 208.0.0.0/8 flowid 1:1 tc filter add dev eth0 parent 1:0 prio 3 protocol ip u32 \ match ip dst 0.0.0.0/0 flowid 1:3 I would assume that any traffic going to

Hello, I'm trying to set up a samba server for a friend who has a mac. He's running OSX, version 10.2. He's got some really big video editing files that are well in excess of 2gb. We're trying to back these up to the samba server, but it quits right around 2gb. That seems to be a magical number. This is with version 2.2.3 of Samba, and Linux-Mandrake 8.2, ext3 file system. I

Hello, I'm wondering just how critical it really is to turn off oplocks. It appears that not only Windows 2k server, but also Netware 5 and above defaults to having these enabled. I just spoke with two software companies running databases off of file servers (no database server, just MDAC stuff), and they had never heard of it, much less require it to be disabled. Everything I've

Hi guys I'm trying to set up the SNMP service. I need it to use MRTG to graph some variables of my Centos 5.3 box. Any of you have a working SNMP configuration can send me to tweak mine? Thanks David -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20090730/ab36b8c3/attachment-0002.html>

Does anyone know if the 3.8 update will fix the long-standing problem with snmp interface counters on 64 bit machines? I think it was mentioned in the RH notes, but they said that a year ago too... (The problem is that the 32 bit counters don't wrap correctly so mrtg/cacti graphs go crazy after 2 gigs of data have gone by). -- Les Mikesell lesmikesell at gmail.com

Hi gang, I have an application that is sending streaming media to a server. The encoder computer sends an average of 200kbit stream; but for short, 1 second bursts, can hit 400-500kbits. After it does one of these bursts, it reduces its output for another second or two, so that it maintains its average of 200kbits. The problem is that it is sending UDP packets into a DSL link that has a fixed

Hello, I'm wondering if anyone else is seeing the same issues I'm seeing here. I have recently upgraded one of my systems from 4.4 to 4.5 and ever since then I cannot get snmp to work. I am monitoring the interface traffic. Please keep in mind the firewall/router I do the same thing without any issues for 4 interfaces and it is still at 4.4 and doesn't have any issues. If I

Hi ALL, I am trying to use the SNMP extension of michel http://x-ray.prokon.cz/data/snmp/ i pached the snmpd damon as mentioned in the README but when i run "snmpwalk -c community target enterprises.18756" i get this error "snmpwalk: No securityName specified (Sub-id not found: (top) -> enterprises)" any idea ? Thanks , venkat

Hello, Can someone explain why I don't get a timeout when I use the community string "public" even if I don't have it defined in my snmpd.conf file. It doesn't return data but it also doesn't timeout. See example below. ... rocommunity nobody 127.0.0.1 ... [root at L703108 pgsql]# snmpwalk -v 1 -c public 127.0.0.1 1.3.6.1.2.1.2.2.1 ifMIB [root at L703108 pgsql]#

Hi, i'm running CentOS 6.0 on my server and installed mrtg from the rpm-package mrtg-2.16.2 . I also installed the depending packages perl-IO-Socket-INET6 perl-Socket6 .... mrtg works fine with IPV4-Addresses. When i specify a Target by IPV6-Address (or hostname resolving to a V6-address) mrtg fails. Here i have a small sample-config for V4 which is working: LogDir: /tmp ThreshDir: /tmp

Hello, I'm trying to monitor asterisk with snmp. I'm using asterisk 1.4.4 compiled with res_snmp on a debian stable: *CLI> module show like snmp Module Description Use Count res_snmp.so SNMP [Sub]Agent for Asterisk 0 I've configured asterisk in res_snmp.conf: [general] subagent = yes enabled = yes and when asterisk start print

I'm trying to use snmpwalk to look at other machines, but I can't get a response. It keeps timing out. It can see itself, though. I haven't had this problem with other machines and I don't know what's different. Suggestions? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I hope someone can help me with this one. I'm trying to graph all traffic on the localhost's network card with Cacti. >From what I understand I should use SNMP to query the traffic, but I can't seem to get SNMP info for the network interface. I have installed all the necessary snmp tools, "yum install snmpd net-snmp net-snmp-utils net-snmp-devel net-snmpt-libs "