similar to: Failing Hard Disk?

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:00:00/40 Emask 0x409 (media error) <F> [

My wife's box has a very intermittent problem, when booting from the Maxtor IDE hard drive. This has been going on for about 2 1/2 years.... The box is a Compaq EVO D300v for the Enterprise. When it boots, there is a SMART advisory from the BIOS that says failure is immenient. Occasionally, it will not boot, because the BIOS does not see the hard drive. I replaced the EIDE cable, but the

Two days ago I installed a brand new SSDNow E50 series (Enterprise) disk on a server. I intend to move the OS there. I just did the physical install and copied a few files to and from it just to see if it was OK. I left it there, waiting for an opportunity to configure it to do real work. Now I have looked at it with smartctl -a and it gives me the following info: 1 Raw_Read_Error_Rate

Il 24/10/2016 14:05, Leonard den Ottolander ha scritto: > Hi, > > On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote: >> === START OF READ SMART DATA SECTION === >> SMART Error Log not supported > > I reckon there's a <snip> between those lines. The line right after the > first should read something like: > > SMART overall-health self-assessment

Il 27/10/2016 19:38, Yamaban ha scritto: > On Thu, 27 Oct 2016 11:25, Alessandro Baggi wrote: >> Il 24/10/2016 14:05, Leonard den Ottolander ha scritto: >>> On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote: >>> > === START OF READ SMART DATA SECTION === >>> > SMART Error Log not supported >>> >>> I reckon there's a

> -----Original Message----- > From: Jason Pyeron > Sent: Saturday, February 07, 2015 22:54 > > NOTE: this is happening on Centos 6 x86_64, > 2.6.32-504.3.3.el6.x86_64 not Centos 5 > > Dell PowerEdge 2970, Seagate SATA drive, non-raid. > > I have this server which has been dying randomly, with no logs. Here is a console picture. http://i.imgur.com/ZYHlB82.jpg

Il 17/01/2016 19:36, Alessandro Baggi ha scritto: > Il 17/01/2016 18:46, Brandon Vincent ha scritto: >> On Sun, Jan 17, 2016 at 10:05 AM, Matt Garman >> <matthew.garman at gmail.com> wrote: >>> I'm not sure what's going on with your drive. But if it were mine, >>> I'd want >>> to replace it. If there are issues, that long smart check

On Thu, 27 Oct 2016 11:25, Alessandro Baggi wrote: > Il 24/10/2016 14:05, Leonard den Ottolander ha scritto: >> On Mon, 2016-10-24 at 12:07 +0200, Alessandro Baggi wrote: >> > === START OF READ SMART DATA SECTION === >> > SMART Error Log not supported >> >> I reckon there's a <snip> between those lines. The line right after the >> first

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

Hi, My xen guest stopped booting suddenly and giving me the below error message. Any idea what is going wrong here? DOM 0 boots OK though. ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 ata5.00: irq_stat 0x40000008 ata5.00: failed command: READ FPDMA QUEUED ata5.00: cmd 60/00:00:cd:ee:36/02:00:09:00:00/40 tag 0 ncq 262144 in res 51/40:72:5b:f0:36/d9:00:09:00:00/40 Emask

I'm not used to using smartd, but have a new set of systems that don't have any sort of RAID on them, so I enabled smartd (18 systems 4 SATA drives each). Running CentOS 5.4 64-bit .. One of them has emailed me twice(despite it saying it would only email me once) saying it has 1 Offline uncorrectable sectors But when I try to find more information, smartctl seems to think everything is

I've got a 1Tb USB disc that appears to be dying - eg it took about 10 days (!) to run 'badblocks -nsv /dev/sdc' and it only did less than 2% in that time. Read access became _really_ slow. So there's definitely something amiss and I've got it offline. There's no drama about the content as I have other backups and I'm resigned to junking the thing, but I'm curious

I've seen similar cases where a USB drive appears to fail but the SMART reports success. The most recent was a 500 GB disk which had internally a Seagate Barracuda SATA drive. It appeared to work well until I sent it a largish (7GB) tarball. As well as SMART I ran a surface check and exercise, all passed. The tar kept failing. I can't test further, the disk has been broken up for

On 19/03/18 14:01, Morgan Read wrote: > Hello list > > I've been running the following command, first in fc20 and then now > (since the beginning of March) in fc26: > now=$(date +"%Y%m%d-%H%M"); sudo rsync -ahuAESX -vi /home/ > /run/media/readlegal/Backup/home > > /run/media/readlegal/Backup/rsync-changes_$now > > Since the move to fc26, this

Hello, I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely. I noticed a problem with Fedora 16 Xen HVM guests though. The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive.. Full HVM guest kernel dmesg attached to this email. See the end of this email for Xen cfgfile for the

> -----Original Message----- > From: Jason Pyeron > Sent: Sunday, February 08, 2015 0:00 > > > -----Original Message----- > > From: Jason Pyeron > > Sent: Saturday, February 07, 2015 22:54 > > > > NOTE: this is happening on Centos 6 x86_64, > > 2.6.32-504.3.3.el6.x86_64 not Centos 5 > > > > Dell PowerEdge 2970, Seagate SATA drive,

hi All, I''m new on the list. System: Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring Linux ctu 3.8.0-19-generic #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux The symptom is the same with Saucy 3.9 kernel. ii btrfs-tools 0.20~git20130524~650e656-0daily13~raring1 amd64 Checksumming Copy on

I finally fixed my drive error problem. This has been going on quite a while. I've posted before with no success on getting this fixed. I was getting these errors. Dec 4 04:03:10 bikesn4x4s kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Dec 4 04:03:10 bikesn4x4s kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC } And now for the amazing smartctl -a

I just installed CentOS 5 on a computer. On boot, I get the a error message, related to 2 SATA disks. These errors did NOT appear on version 4.4 with the EXACT same hardware. Could someone please tell me what these error are and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2

Hello, A message was already posted here regarding this issue- I experience the same problem with 6 machines, all with Hitachi harddrive, VIA Motherboard which uses the sata_via driver: Once every few days each machine freezes or just stops reading from the HD and throws i/o error messages as pasted below. Note that the first "ata exception Emask" errors apear right after booting,