similar to: sendmail routing

CentOS 4.6 Hi All: Is it possible to force sendmail to use a specified host name for outbound email to a selected domain name instead of the host name that can be found by looking up the DNS entry? The problem is that we have a client that uses the same ISP as we do and the IP addresses assigned to both of us are very close. This has resulted in connection problems specifically with our

CentOS 6.5 Hi All: We are looking for a way to automate the handling of bounced emails. I have spend some time looking an scan find one open source package, bounceHammer, and one commercial package, BoogieTools. Does any comments on the effectiveness of either package? Any suggestions on other packages? TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

From: Warren Young Sent: April 22, 2015 20:46 > On Apr 22, 2015, at 11:56 AM, Hugh E Cruickshank > <hugh at forsoft.com> wrote: > > > > I have done some "what if" testing. > > Using which tool? My simulator, or something you cooked up > yourself? If the latter, would you care to share? I cobbled something together in OpenEdge ABL. I have uploaded

From: Mark Milhollan Sent: April 21, 2015 05:35 > On Mon, 20 Apr 2015, Hugh E Cruickshank wrote: > > >CentOS 6 > > >From ''man fstab'' ... > > The sixth field, (fs_passno), is used by the fsck(8) > program to determine the order > in which filesystem checks are done at reboot time. > The root filesystem should be >

From: Warren Young Sent: April 21, 2015 14:13 > On Apr 21, 2015, at 9:50 AM, Hugh E Cruickshank wrote: > > > > From: Kay Diederichs Sent: April 21, 2015 03:43 > >> > >> instead of having 20 for all of them, set > >> the first filesystem to 17, the second to 19, the third to > 23, and the > >> fourth to 29. > > > > Thanks but

Hi All: It appears that the RPMforge.net site is down. Can someone confirm and possibly advise when it might be expected back? TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

CentOS 4.8, BIND 9.2.4, DHCP 3.0.1 Hi All: I have a rather perplexing problem where the DNS entry in BIND for one of my network printers sporadically "disappears" from our zone file (but not the reverse zone file). We have four Lexmark printers connected locally over our internal LAN using static IP addresses. We have 3 T640n printers and a T642n printer and it is only the T642n

On Tue, 9 Jun 2020 10:26:46 -0700 "Hugh E Cruickshank" <hugh at forsoft.com> wrote: > From: Rudi Ahlers Sent: June 9, 2020 10:22 > > > > I am looking for an offline accounting package recommendation, > > please. I enjoyed using Xero accounting, but need something that's > > offline, and where the data remains my property. Having used > >

Hi All: I am new to rsync so be gentle with me. I have been able to get rsync working enough to be able to list modules but not transfer files. When I try to transfer a file from the client to the server I use the command: rsync -avz fapmenu fisdev::bak The client displays the following messages: @ERROR: access denied to bak from pgiprd.forsoft.com (192.168.2.19) rsync:

CentOS 4.8, BIND 9.2.4 Hi All: I have a rather annoying problem with rndc which I have not been able to resolve despite much searching and many attempts to correct. When making changes to our DNS entries I have tried to use the following procedures: 1. Flush the cache buffers: rndc flush 2. Stop named: rndc stop 3. Delete the journal files: rm *.jnl 4. Edit the forward and/or

Hi All: I am looking for some possible recommendations on the handling of our internal DNS services. First some background... Until recently our entire network was located within a single facility with internal DNS services provided by our CentOS 4.7 (using BIND). While I had problems with DHCP/DNS communications it was basically working. At the beginning of the month we moved the production

From: Kay Diederichs Sent: April 21, 2015 03:43 > On 04/21/2015 06:08 AM, Hugh E Cruickshank wrote: > > > > The second idea was to set each filesystem to a different random > > count value. This would run the risk of having two or more > > executions at the same time but it would probably not be very > > frequent. > > Using "tune2fs -c", set the

CentOS 6 Hi All: Over the weekend I had to reboot one of my systems and got hit with fsck runs on all of the filesystems. I would not mind so much except doing them all at once took over an hour. I would like to be able to stagger these, ideally only execute one fsck per reboot. I have been able to think of two possible solutions but neither is terrific. My first idea was to manually run fsck

From: Les Mikesell Sent: April 21, 2015 09:19 > > Why do you care about running them at the same time when it doesn't > take longer to run them all in parallel? Except I think the root > filesystem normally runs first. So you might want to stagger it vs. > everything else. I am trying to avoid running them at the same time in an effort to avoid 70 minute boot times (which is

CentOS 4.7, Kerberos 1.3.4 Hi All: This is driving bonkers. A couple of weeks ago I started working on implementing Kerberos. I got as far as getting the primary/master KDC running on our CentOS development system before I got dragged off to work on something a little more pressing. I finally got back to it this week only to find that the krb5kdc service now fails to start. A check of the log

Hi All: We have been looking at implementing deduplication on a backup server. >From what I have been able to find the available documentation is pretty thin. I ended up trying to install LessFS on this CentOS 5.7 box but we have now encountered problems with fuse version. Has anyone out there been able to get LessFS running on CentOS 5.7 and can provide some pointers? If not LessFS can you

CentOS 4.8 Hi All: We recently had a Sony SDX-500V tape drive fail on one of our servers running CentOS 4.8. I have now replaced it with a spare SDX-500C. The problem that I am having now is that the failed drive had ceased responding to SCSI commands and we have since rebooted the system which resulted in the tape drive being removed from our current hardware configuration and the system does

Hi All: I have an HP DL380G5 server which I am loading CentOS 6.2 on and it does not appear to recognize all of the RAM installed on the server. The BIOS is reporting 26GB however top is reporting: Mem: 15720140k total, 418988k used, 15301152k free, 30256k buffers Swap: 17956856k total, 0k used, 17956856k free, 135536k cached and free is reporting: total used

Hi all: I have a situation where I need to change the distribution of emails for selected accounts on a regular basis. This is for the controlling of the distribution of our "support" email address. In the past I just created a "alias.bas" file to hold the bulk of our aliases and then 3 "support" alias files, alias.wkd, alias.evn and alias.wed (for weekday, evening

Hi , I am running sendmail 8.13.1 on Cent OS 4.4. This Sendmail Server can not send emails to a few domains. Pls assume that these domains are domain1.com domain2.com domain3.com Now I want to know that Whether I can send emails to the above domains via another SMTP host. Pls note that I DO NOT want to send email to ALL THE DOMAINS via another SMTP host. -- Thank you Indunil Jayasooriya