similar to: For you old-timers, an RS232 question about data rate confirmation.

I installed Board Master a software that control a CNC machine to produce PCB (Printed Circuit Board). The software install flawlessly but to check if it works I need RS232 working to control CNC machine. I tried to set connection parameters in Board Master choosing COM1 (the only available) but CNC machine don't move and software keep asking for switching machine on. Of course software and

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

how to simulate a RJ 45 port to act as serial port any option in Centos 5.1. Please help me out on this. Regards, Gopinath M Signal Networks Pvt. Ltd. Smile... it increases your face value! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080418/bcacfdf9/attachment-0001.html>

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > >> a friend gave me an old apc smart-ups 1250

Hi there Does any one of you know something about R and an implemented RS232-Interface? Are there any packages? Or is it possible to write an extensions or something like that in C/C++ ? The problem is that i should handle the information from a measuring device via the RS232-Interface (probably you know LabVIEW, which provides this functionality). These informations should then directly be

Hi all, Is there a method in centos where a program can be started that listens on a given IP port and when something connects it will transfer data from the RS232 port to the IP port. reads and writes of course. Trying not to reinvent the wheel if I dont have to... Thanks, Jerry

Hello guys. I am new in mac world and in wine apps. I have this singular situation: I have a macbook with wine and winebottler installed. I want to use this exe app: azloader.exe. Ok, wine is able to load it normally. But... the problem is, my macbook has not the RS-232 port. So I bought a RS-232 to USB adapter. I've installed the correct "drive" to use that. I've tried that in

Hi Team, We need freeradius-server-3.0.21 to be cross compiled for armv7 based Marvell switch. Toolchain: armv7-marvell-linux-gnueabi-LE_i686_20160226 host : arm-none-linux-gnueabi CC : arm-marvell-linux-gnueabi-gcc For that talloc is dependent library. Trying to cross compile talloc-2.3.1 to for our architecture with below command. ./configure --disable-python --enable-gccdeps

Hi Recently i bought a MicroDoWell BP50, and with it followed a USB 2 serial converter. When i plug it into my 2.6.19 kernel, dmesg shows hiddev96: USB HID v1.10 Device [Cyber Power System CPS RS232 USB BRIDGE for UPS] on usb-0000:00:04.2-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver So, i figured i should use usbhid-ups,

Hello people, I used primarily mutt and sendmail for many years. (And elm before mutt.) All my mail was saved into ~/Mail. Messages from, say, smith at foo.ber were stored in ~/Mail/smith; all mail from smith was catenated into one file, and if I wanted to find something that smith had written, I would just cd to ~/Mail and grep or egrep on a likely word or phrase. Is there a script

I've finally made the switch to CentOS 5.1 (I had been running 4.6). So far, so good, but I do have a few issues. First, I can not find kermit (or ckermit) in any of the repos (base, extras, centosplus, rpmforge). On my 4.6 systems, /usr/bin/kermit was provided by the package ckermit in the base repo. That package appears to be no longer available. Any ideas where I could find a

Hi, First, I am new to dovecot. Before my Jan '08 meltdown, sendmail was sufficient. A friend set up dovecot and since things just-worked, I was happy with that. Now I have a new mailserver and what was installed nearly two years ago fails. My pal installed things in dovecot.conf this way: default_mail_env = maildir:~/Maildir but the new mail environment is too different to be

Hi, Reference: > From: Manuel Wolfshant <wolfy at nobugconsulting.ro> > Date: Tue, 28 May 2019 16:42:21 +0300 Manuel Wolfshant wrote: > On 5/28/19 3:39 PM, Julian H. Stacey wrote: > > grumpy at mailfence.com wrote: > >> a friend gave me an old apc smart-ups 1250 > >> it has a rs232 interface but i have no pc with a rs232 port > >> i attempted to

grumpy at mailfence.com wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use a rs232 to usb adapter but the ups goes nuts > i connected the ups to batteries and verified it was working properly > when i plug the usb cable into the pc the ups shuts down > when i attempt to turn it on it beeps twice

Apc uses a propietary serial cable and your convertar for sure it's wired standard. Refer to the following link for info. https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml Good luck On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use

Ubuntu creates /dev/ttyUSB0 for me when I plug in the usb-to-serial-adapter. I have a symbolic-link to /dev/ttyUSB0 from 'dosdevices/com1'. What is new in 10.04 Ubuntu is that I have to sudo chmod o+r and sudo chmod o+w on /dev/ttyUSB0 every time before I start the app which uses that serial line. ttyUSB0 goes away when I unplug the serial adapter from the USB port or shut down the

Hello all, Last week I rescued and UPS from the trash (it's really amazing the kind of things you can find in the trash of the university research labs). No manual, no cd, no cables, just the unit. It's name is "Blizzo 500", and blizzo was just the rebranding of a spanish reseller which has been out of the scene for nearly two years now, at least according to the wayback

Hi all I have a problem switch in our data centre, which is connected to a linux server via a serial cable. I know I can / could access the switch from my Windows PC back at the office, using hyperterm, but trying to access it using minicom just doesn't seem to work. I have changed the comms in minincom to use /dev/tty0 & the baud rate to 9600, yet I can't seem to connect with

Hi David, Thanks for your comment. I haven't posted the data because they are unpublished and include human subjects so there are issues with sharing on a list serv, but I thought perhaps someone had encountered a similar problem and would already know the answer. I will reconsider whether my University's ethics approval would allow me to post the data and update the question if I think