similar to: Centos 5.3 install on gigabyte GA-MA790FX-UD5P motherboard

Hello, Like many trying and posting here, I''m new to VGA passthrough. Computer was bought, checking compatibility from http://wiki.xen.org/wiki/VTd_HowTo The hardware is mostly not exactly on the list, but mainly new versions of the same series (I think). IOMMU "seems" to be working (not 100% sure what to check). I used debian/wheezy kernel and xen, dom0 and HVM domu.

Hello, I FINALLY got Xen working with VT-d. I compiled Xen-unstable (3.3) from Mercurial on CentOS 5.2, but compiled my own kernel-xen from the latest CentOS SRPM. (Made sure pciback was built-in and not a module, as the stock kernel-xen has it as a module.) I''m probably going to write a how-to soon, so stay tuned! I have a JMicron SATA/PATA PCI Express controller with a DQ35JO

Hello, I FINALLY got Xen working with VT-d. I compiled Xen-unstable (3.3) from Mercurial on CentOS 5.2, but compiled my own kernel-xen from the latest CentOS SRPM. (Made sure pciback was built-in and not a module, as the stock kernel-xen has it as a module.) I''m probably going to write a how-to soon, so stay tuned! I have a JMicron SATA/PATA PCI Express controller with a DQ35JO

I have a freshly built, updated EL6 system and am having problems with USB stability - at boot everything works fine but within a few hours, USB devices start disappearing randomly. At first I though the USB devices were suspect, but removing the suspect devices and an accessory PCIE USB card hasn't changed anything. As of now, a single USB device is working. (which is lucky, it hosts the

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

Hi all, Helping a friend setup a new machine - it will be a low volume web and mail server. He wants to set it up with 2 drives in a mirror setup. The motherboard he bought supports mirroring on the hardware level. I have heard of issues before using hardware raid on Linux systems. Which way would you recommend we go on this? Thanks for any suggestions. Dale

Hi Gang! I've got this (now old) Gigabyte motherboard (GA-7N400 Pro2), I've had it for just over 3 years. I use it, so far, with only PATA devices. I'm toying with the idea of buying a matched pair of SATA drives and when I install Centos 5 (hopefully soon), building it with software raid (using the two drives as mirrors of each other). Now, I wouldn't have ever even thought of

In message <CAD0Rxe=p2gHHN9U3Zjn34Y71-KTxk5v+WzG7V3VH0ZNGCzqSvA at mail.gmail.com> Gene Cumm <gene.cumm at gmail.com> wrote: >On Fri, Jan 10, 2014 at 9:35 PM, Ronald F. Guilmette ><rfg at tristatelogic.com> wrote: >> In message <BLU0-SMTP145A44932CB6CC2DB4621568BB30 at phx.gbl>, >> Ady <ady-sf at hotmail.com> wrote: > >>>I don't know

Hello, I notice a bug in syslinux 6.01 ( bios version ) when I install it in a USB flash drive ( FAT32 partition ) and when I want to boot this USB flash drive with a gigabyte motherboard ( GA-P31-DS3L ), I setup my usb flash drive ( 4 Gb ) like this in windows XP : syslinux.exe -m -a -i -d /boot/syslinux H: then I create a syslinux.cfg menu and I add these files : chain.c32 libcom32.c32

Hello All, I have a machine that crashed. Some part of the motherboard (power supply-related) went south. The motherboard, CPU and memory have been replaced with a much newer architecture. The OS and data are intact on two SATA drives that were RAID1 with LVM. I am going to use 'linux rescue' to recover the LVM backup so I can mount the RAIDs (there were two) in a new CentOS

Hello, I didn't try 6.02-pre15, I will do and I will post the results, my keyboard is a PS/2 model, the "legacy USB storage option" is enabled, I tried also an USB keyboard but there is no change, so it's not a keyboard problem, it probably something in syslinux ( ldlinux.sys ? ) who create a serious bug with my motherboard, I tried also with a USB HDD ( not a flash drive )

Am 22.01.2014 09:27, schrieb Ronald F. Guilmette: > In message <BLU0-SMTP46982596DE9C2639CEB6B078BA40 at phx.gbl>, Ady wrote: > >> I am going to repeat what Genec requested at some point. Please post >> the result of (replace 'sdX' with the adequate device): >> >> 'fdisk -l -c=dos -u=cylinders/dev/sdX' >> and >> 'fdisk -l

Hi, I recently changed my motherboard to Gigabyte GA-7DPXDW+ and I can't get onboard AC97 sound to work. I added 'device pcm' to my kernel config file and sndstat returns FreeBSD Audio Driver (newpcm) Installed devices:", nothing ;( Any hints ? I'm running FreeBSD 4.8-STABLE

Greetings, I''m attempting to do gfx_passthru with the primary graphics adapter (03:00.0), passing it to a guest. I can unbind it from the host but when I fire up the guest OS my monitor loses signal from the graphics card and that''s that. The GFX card is dual DVI, I''ve tried both slots. Host is Linux 2.6.32.14-1.2.105.xendom0.fc12.x86_64, Guest is Windows 7. PC is an

All, I have an GigaByte motherboard GA-M61P-S3 and I was wondering if any kernel watchdog processes will work with that? Jerry ----------------------------- /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/softdog.ko /lib/modules/2.6.18-53.1.4.el5/kernel/drivers/char/watchdog/ibmasr.ko

In message <BLU0-SMTP47F18ED7837B2CE7C672C88BBE0 at phx.gbl>, Ady <ady-sf at hotmail.com> wrote: >@Ronald, > >I have to admit I am a little bit frustrated. lol Join the club! I've invested hours and hours and hours on this little project, and all I have at the end is a board that _still_ has a brain damaged BIOS that won't boot things that everything else I own

I read the mailing list archive about Gigabyte motherboards not working with USB booting ("[syslinux] Gigabyte recent bios & syslinux extlinux trow USB-IDE bridges or pendrives", 16 Aug 2006). I have a Gigabyte GA-MA790GP-DS4H motherboard that I tried to boot in USB-HDD mode with a PNY boot pen. I installed System Rescue CD on it. It would appear that Gigabyte still doesn't

On Aug 2, 2013 3:45 AM, "Barto" <mister.freeman at laposte.net> wrote: > > Hello, > > I notice a bug in syslinux 6.01 ( bios version ) when I install it in a > USB flash drive ( FAT32 partition ) and when I want to boot this USB > flash drive with a gigabyte motherboard ( GA-P31-DS3L ), > > I setup my usb flash drive ( 4 Gb ) like this in windows XP : >

In message <BLU0-SMTP145A44932CB6CC2DB4621568BB30 at phx.gbl>, Ady <ady-sf at hotmail.com> wrote: >> Is there something specific I should try? /boot/syslinux ? >> > >>From the syslinux boot prompt in UBCD you could try: >/boot/syslinux/config.c32 /boot/syslinux/syslinux.cfg /boot/syslinux/ > >(Yes, it is the same basic absolute path, three times, all

> > In message <BLU0-SMTP1383C5798F6C577E5FFF368BA40 at phx.gbl>, > Ady <ady-sf at hotmail.com> wrote: > > >> With respect to all of the actually important stuff however, I may have > >> missed it all, but I don't recall having read or seen an explanation of > >> what Ady & everybody else finally figured out about all this... > >