similar to: Upgrade fm 4.7 to 5.3: mptscsi module?

I started to have problems similar to ones described in the past on this list but could not find any kind of resolution. I did an lsmod, a mount command, and for fun, did an strace on shutdown to see where it is hanging, and an ltrace as well. Any thoughts? Module Size Used by parport_pc 28033 0 lp 15661 0 parport 38153 2

Hello all, I have a problem with Xen and FibreChannel. The Dom0 can''t export a Disk on a FibreChannel SAN-Box to the DomU''s. In the DomU configuration I try: disk = [ ''phy:/dev/sdb1,/dev/sda1,w'' ] or disk = [ ''file:/mnt/sambashare.img,sda1,w'' ] sambashare.img is a 512MB great Diskimage on a Partition on the FC-SAN-Box, the Dom0 mount this

Can I use puppet to ensure that a file includes certain text but not be required to maintain the entire file? For example, I would like /etc/modprobe.conf to contain the following lines but the file will also contain lines that are system dependent. --------------------------------------------------------------------------------------- # Disable IPV6 alias net-pf-10 off alias ipv6 off

Hello all, I?m at my wits end trying to resolve this. We are running centos 4.5 on Intel hardware. Dual SCSI disk drives mirrored on an LSI Logic controller. Every once in a while and not always on the same server and not only on the local SCSI Drives. System A ? Dual internal drives on /dev/sda System B ? Dual internal drives on /dev/sdc with a DAS on /dev/sda. Each of these

https://bugs.freedesktop.org/show_bug.cgi?id=102192 Bug ID: 102192 Summary: Dell XPS 15 9560: PU: 1 PID: 58 at drivers/gpu/drm/nouveau/nvkm/subdev/mmu/gf100.c:190 gf100_vm_flush+0x1b3/0x1c0 [nouveau] Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All)

Hi all, I just noticed that my two nics that are bonded via mode 0 are showing the same mac addy in ifconfig. Is this normal? In syslog I keep getting; kernel: pbond0: received packet with own address as source address Some guidance is appreciated before I dive in and troubleshoot. If I don't list the mac addy in my ifcfg-th# files, only one of the 2 nic comes up during boot.

Just run into an odd DomU crash doing live migration of a 4-VCPU domain (with 3.0.4 but the code looks the same in 2.6.18/unstable to me) - the actual panic is attached at the end of this, but the bottom line is that the code in cache_remove_shared_cpu_map (in arch/i385/kernel/cpu/intel_cacheinfo.c) is attempting to clean up the cache info for a processor that does not yet have this info setup -

I'm getting this on two XF_64 systems by running "yum update" today. Perhaps Python 2.4 is missing some lib64 libraries? --> Running transaction check ---> Package python.x86_64 0:2.4.3-24.el5_3.6 set to be updated ---> Package tkinter.x86_64 0:2.4.3-24.el5_3.6 set to be updated --> Processing Dependency: /usr/lib64/python2.4 for package: libxslt-python --> Processing

Hi All, I have an "appliance" cd which uses CentOS 4.0 (Final) which I am trying to load on a new Dell 1950 server with a SAS driver controller. During the install it fails to find any disks to load to. I got the drivers from Dell and dd the correct one to a floppy, boot from the appliance cd and enter linux dd at the prompt. I load the driver in the install and it still fails to find

Hi everybody I'm finding on my server a lot of a lot of errors like this: Jun 19 14:22:45 posta2 kernel: [885017.412902] BUG: soft lockup - CPU#2 stuck for 22s! [dovecot-lda:11955] Jun 19 14:22:45 posta2 kernel: [885017.412906] Modules linked in: ocfs2(E) jbd2 quota_tree dm_service_time dm_multipath ocfs2_dlmfs(E) ocfs2_stack_o2cb(E) ocfs2_dlm( E) ocfs2_nodemanager(E)

> -----Original Message----- > From: Jason Pyeron > Sent: Sunday, February 08, 2015 0:00 > > > -----Original Message----- > > From: Jason Pyeron > > Sent: Saturday, February 07, 2015 22:54 > > > > NOTE: this is happening on Centos 6 x86_64, > > 2.6.32-504.3.3.el6.x86_64 not Centos 5 > > > > Dell PowerEdge 2970, Seagate SATA drive,

+cc: ocfs2-devel, sunil Marek, Thanks for the detailed report! Can I trouble you to file a bug at http://oss.oracle.com/bugzilla ... oh, is that your report http://oss.oracle.com/bugzilla/show_bug.cgi?id=1339? This looks like a deadlock of some sort. I don't think your hardware configuration really matters here. We'll keep looking into it. Joel On Tue, Dec 20, 2011 at 08:22:48AM

Every few hours we get the following in /var/log/messages: Oct 19 20:56:20 wltracp1a kernel: mptscsi: ioc0: bus reset: SUCCESS (sc=0000010190c56080) Oct 19 20:56:20 wltracp1a kernel: mptscsi: ioc0: attempting task abort! (sc=0000010190c56080) Oct 19 20:56:20 wltracp1a kernel: scsi4 : destination target 2, lun 0 Oct 19 20:56:20 wltracp1a kernel: command = Test Unit Ready 00 00 00 00 00 Oct

Hi all, Last week we had 2 times an "uncorrectable ecc memory error" crash on our server on the same memory module. After removing the faulty module and restarting the server, everything was working again. However, yesterday we had a soft lockup and had to restart the server again. No warning or ecc error this time. Everything is working now, but we want to avoid this in the future

Is there an easy way to get the "none" option back into OpenSSH? In order to do TCP/IP over amateur radio in the U.S. (and most other countries) we must not use encryption to obscure the meaning of our info, but we are allowed to use authentication to set up the links. This means we need normal authentication but we need the "none" option back in OpenSSH in order to use it

Hi all, I have upgraded a test machine from OpenSuSE 11.1 to 11.2. I have found following bug: the server is a 2x quadcore intel box also 2x4=8cpu If you limit the dom0 cpu with dom0-cpus= [1-7]: - [xenwatch_cb] is running 100% cpu and makes var log entry every 65 sec BUG: soft lockup - CPU#X stuck for 61s! - xm commands not work - xend is dead if set dom0-cpus to 0 or 8: - everything looks

On Tue, July 12, 2016 12:19 pm, m.roth at 5-cent.us wrote: > Hi, folks, > > Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS > (rev 08). It *appears* that a) trying MegaRaid, and b) from what I'm > googling, that what I need are mptfusion-related packages. > Unfortunately, yum shows me nothing available in base, epel, or > rpmfusion. Am I looking for

I''m testing xen 3.4 on my servers, and I''m having problem with controller driver, he can''t load itself properly so the system isn''t booting. The system is debian 5.0 with kernel 2.6.26-2-xen from distribution and 2.6.29-5 compiled, the problem occure with both kernels ouput from debian 5.0/kernel 2.6.26-2-xen/xen-3.4.1-rc2 4.306723] PNP: No PS/2

Hi! I am trying to export a PCI device (an AVM Fritzcard PCI ISDN card...) to a domU but when starting my domU I am getting this error: "pciback pci-4-0: 22 Couldn''t locate PCI device (0000:00:06.0)! perhaps already in-use?" My system is running both debian etch in dom0 and domU... Below you can find (hopefully) all important information... Sincerely, Gaubatz Patrick

Alle, I am trying to install CentOS 5 on a Dual Xeon 5160 FJ RX200 S3. The RAID hardware is an internal LSI MPT 1068 SAS/RAID controller (LSI 1068SASIME-2300). I have downloaded the drivers (mptsas, mptscsih and mptbase) and created the required floppy. When I run linux dd after booting from either the DVD or Disk 1 of the CentOS distro, it says it loads mptsas, mptbase and mptscsih and