similar to: new RAID5 array: 3x500GB with XFS

Hello all fellow CentOS users! I have a working xen setup with 3 paravirt domUs and one Windblows 2003 fully virt domU. There are to virtual networks. As far as I can tell in the paravirt Linux DomUs I have gigabit networking, but not in the fully virt Windows 2003 domU.... Is there a setting for this, or is it not yet supported? I run xen-3.0.3-64.el5_2.3 Kind regards, Coert

Hello all, At our office a have a server running 3 Xen domains. Mail server, etc. I want to make this setup more redundant. There are a few howtos on the combination of Xen, DRBD, and heartbeat. That is probably the best way. Another option I am looking at is a piece of shared storage, a machine running CentOS with a large software RAID 5 array. What is the best means of sharing the storage?

Hello all, we have a new setup with xen on centos5.3 I run drbd from lvm volumes to mirror data between the two servers. both servers are 1U nec rack mounts with 8GB RAM, 2x mirrored 1TB seagate satas. The one is a dual core xeon, and the other a quad-core xeon. I have a gigabit crossover link between the two with an MTU of 9000 on each end. I currently have 6 drbds mirroring across that

Hello all, I have looked around on the HCL and on other hardware sites. Do any of you have experience with Centos 5.5 64 bit on these motherboards? Regards, Coert Waagmeester

Hello all, I have been running xen for a while now with two interfaces: dummy0 for host only communication, and eth0 for the outside network. my script looks like this: (/etc/xen/scripts/network-bridge-more) ------------------------------------------------------------------ #! /bin/sh dir=$(dirname "$0") "$dir/network-bridge" "$@" vifnum=0 netdev=dummy0

Hello all, Windows......................... I have installed a Windows Server 2003 fully virt domU with the GPLPV drivers. The network settings reset on every restart of the domU. Weird STOP errors keep popping up.... Was I naive to think you can run a Windows server on Xen? Are any of you guys doing it successfully? Am I better of just installing windows server 2k3 on bare hardware? Just

Hello all, I am running drbd protocol A to a secondary machine to have 'backups' of my xen domUs. Is it necessary to change the xen domains configs to use /dev/drbd* instead of the LVM volume that drbd mirrors, and which the xen domU runs of? regards, Coert

Hello all, Firstly, I have checked on google, and there are indeed howtos on this subject. Have any of you done this or something similar on CentOS? If so, could you send me the configs maybe? How can I find out if the centos version of samba supports extended ACLs? I ran a modinfo xfs, and XFS supports it. I want to set up a samba server that authenticated to AD. I have that up and running,

Hello all, Got myself the Linux Advanced Routing & Traffic control book http://lartc.org/howto/ All the commands in the guide do not survive reboots. Could someone point me in the right direction, where I can find CentOS/Redhat specific documentation on the whole /etc/sysconfig/network* setup? Kind regards, Coert Waagmeester

Hello all, About a year ago I set up a mail server on CentOS using this howto: http://wanderingbarque.com/howtos/mailserver/mailserver.html I managed to add amavisd-new with clamav and spamassassin. It runs very well, but it runs on CentOS 5.2, and if I try to upgrade, amavisd-new and clamav break. we are now also at the point where a backup mx will need to be implemented. If necessary I am

Hello all, I have a machine with 2 SATA 250GB disks which I want to upgrade to 1TB SATAs This is the partition structure on both disks: Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 25 200781 fd

Hello all, Got samba with AD integration and extended ACL up and running. Here is what I am trying to do. share1 in smb.conf: [share1] comment = share1 path = /mnt/data/share1 public = no writable = yes printable = no valid users = @DOMAIN+group1 user1 and user2 are members of group1 user3 is not user1 creates

Hello all, I have been running xen for a while now with two interfaces: dummy0 for host only communication, and eth0 for the outside network. my script looks like this: (/etc/xen/scripts/network-bridge-more) ------------------------------------------------------------------ #! /bin/sh dir=$(dirname "$0") "$dir/network-bridge" "$@" vifnum=0 netdev=dummy0

Hello all, Have installed eclipse 3.5 x86_64 from the eclipse site, with CDT and QT integration. I am just starting to learn C++ but I would like to know how to set up the ability to compile for 32 bit as well? At the moment I am googleing this as well. Regards, Coert

Hello all! I have a samba server as a member of a domain with trust relationships to two other domains. Samba is configured with: winbind use default domain = yes winbind separator = + so the domain samba is member of does not use the seperator, but the other 2 domains do. If I change this to winbind use default domain = no ,will I have to update all the ACLs on the filesystem to include

Upgraded the kernel to the latest, then tried to rebuild the proprietary Catalyst driver for a Radeon HD 4550 on a Dell Optiplex 980. The install dies, with a c error. Anyone else out there succeed in building one on the 2.6.18-194.17.1.el5-x86_64 kernel? I went to the ATI website, and the "installation instructions" include that it needs a) 32 bit software (which? dunno) and b) a

Hi, I have gone thought he painful operation of registering just to edit one page then I found out i have to also get on this mailing list to get permission... Why can't the wiki page display that I have no permission to edit? and also why can't edits be sent to a moderation queue for approval? Anyways this is my request to edit http://wiki.centos.org/HowTos/Disk_Optimization page as it

Hello all, I have just configured a 64-bit CentOS 5.5 machine to support an XFS filesystem as specified in the subject line. The filesystem will be used to store an extremely large number of files (in the tens of millions). Due to its extremely large size, would there be any non-standard XFS build/configuration options I should consider? Thanks. Boris. -------------- next part -------------- An

I've got a bit of a problem with Samba. I just can't work out how to change passwords or remove users. I've just got user security.. lines in smb.conf are: security = user passdb backend = tdbsam I've removed the user using pdbedit, I've removed the unix user, smbpasswd says the user doesn't exist yet I can still connect to the shares. I'm

Dear all, In "HowTos/Disk_Optimization", the calculated value of stride size and stripe width appears to have the "K" suffix incorrectly appended to them. Eg: * (64K/4K) = 16K * (3*16K) = 48K * (16K+16K) = 32K The values provided on the mkfs.ext3 command line however, do drop the "K" suffix. I'm no expert on RAID, but the "K" suffixes