similar to: unable to read partition table in log

Hi, I'm trying to disconnect some iSCSI targets, but can't seem to. [root at localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1

Hello all, I have 2 x 250GB sata disks (sda and sdb). # fdisk -l /dev/sda Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 14939 119997486 fd Linux raid autodetect /dev/sda2 14940 29878

Hi there, I have a system with the following: # fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 9471 75971385 83 Linux /dev/sda3

Hello, I have a server working on centos 5.7-64 minimal installation. I have 3 separate physical drives: 120 gb ssd, 2x 3tb disks for storage. My linux installation is on ssd disk, and I want to make raid 1 for these two 3tb disks and store data, like under /mnt/data. Can you please tell me the path how this is possible? Thanks for your help! Best regards, Here are some output of commands I

My CentOS 5.4 box has a single HBA card with 2 ports connected to my Storage. 2 Luns are assigned to my HBA card. Under /dev instead of seeing 4 devices I can see 12 devices from sdb to sdm. I am using qlogic driver that is bulitin to the OS. Has any one seen this kind of situation? Paras -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, I'm currently trying to install centos 5.4 x86-64bit on a raid 1, so if one the 2 disks fails the server will still be available. i installed grub on /dev/sda using the advanced grub configuration option during the install. after the install is done i boot in linux rescue mode , chroot the filesystem and copy grub to both drives using: grub>root (hd0,0) grub>setup (hd0)

Mats, Thanks for your trial; following your mail I tried it with hda; it is the same, it does not work - "fdisk -l" does not show hda. Regards, Ian On 4/2/07, Petersson, Mats <Mats.Petersson@amd.com> wrote: > > -----Original Message----- > > From: xen-users-bounces@lists.xensource.com > > [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of Ian Brown

Hi. I added a disk to a hardware raid 5 array and now i want to expand the LVM physical volume. There are now 4 sas 146GB disks in the server. The virtual disk /dev/sdb from the raid controller has been resized successfully with the server management software osma. [root at srv1 ~]# fdisk -l /dev/sdb Disk /dev/sdb: 438.4 GB, 438489317376 bytes 255 heads, 63 sectors/track, 53309 cylinders

i would like to use the module puppet-lvm and would like to pass values to it. I have it setup properly as a module but I can''t for the lfe of me get it to take any values that I put in my baseconfig.pp in my home folder. like shouldn''t something like this work?? puppet-lvm {''setvolume'': vg => ''myvg'', pv =>

I am trying to install CentOS 4.6 to a pair of 750GB hard drives. I can successfully install to either of the drives as a single drive, but when I try to use both drives and mirror the partitions, I start having problems. Anaconda crashes as it is trying to format the drives. This is what I'm trying to create: /dev/md0: 200MB, /boot /dev/md1: 2GB, swap /dev/md2: rest of the

Hi, the situation: Label: ''RootFS''  uuid: c87975a0-a575-405e-9890-d3f7f25bbd96     Total devices 2 FS bytes used 284.98GB     devid    2 size 311.82GB used 286.51GB path /dev/sdb3     devid    1 size 897.76GB used 286.51GB path /dev/sda3 RootFS created when sda3 was 897.76GB and sdb3 311.82GB. I have now freed other space on sdb. So I deleted sdb3 and recreated it occupying all

I have a 1.5TB internal disk on my server. I partitioned this with fdisk, and CentOS-5.6 runs perfectly on it. But fdisk gives a very strange report. Here is the perfectly normal response to mount: ----------------------------- /dev/sdb10 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdb2 on /boot type ext3

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

more messages in the other node of the cluster.../var/log/messages. ======== Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:05:59 linux2 kernel: cdrom: open failed. Jun 1 19:09:35 linux2 kernel: OCFS2 Node Manager 0.99.10-BETA14 Tue May 31 23:34:42 EDT 2005 (build 82257c19fee200eff2ba31569613b46a) Jun 1 19:09:35 linux2 kernel: OCFS2 DLM 0.99.10-BETA14 Tue May 31 23:34:43 EDT 2005

Hello, I have noticed that when I use xen-create-image to generate an domU, the whole server (dom0 and domU''s) basically hangs until it is finished. This happens primarily during the creation of the ext3 filesystem on an LVM partition. This creation of the file system can take up to 4 or 5 minutes. At which point, any other domU''s are basically paused... tcp connections time

What's the easiest way to transition to a larger HD when using LVM2? I'm running Centos 4.4. I'm going from a 20gb HD to a 40gb HD. I've already DD'd it to the 40gb HD. So now I have 20gb of unused space. Ideally, I'd like to make it one big physical space for the logical space instead of making another physical partition to expand the logical. Here is what I have now

I am planning to increase the disk space on my desktop system. It is running CentOS 5.9 w/XEN. I have two 160Gig 2.5" laptop (2.5") SATA drives in two slots of a 4-slot hot swap bay configured like this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End

Hello Everyone I have a remote CentOS 6.4 server (with KVM access), when I received the server it was running with LVM on single disk (sda) I managed to remove LVM and install raid 1 in sda and sdb disks the mirroring is working fine, my only issue now is that everytime I reboot the server I got the grub command line and I have manually boot using comand grub> configfile

I posted this to the Fedora-list, but thought I might get some additional information here as well. I have a HD that refuses to mount with a 'bad magic number in super-block'. I'm running FedoraCore 6 x86_64. [root at moe ~]# fdisk -l /dev/hdc Disk /dev/hdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes

Hey list, I have an older 2005 Uniwill 259ia3 with a Phoenix bios. Flash booting is limited to keys 512 MB or less! Here's my setup recipe: used the HP utility v. 2.0.6 giving me this geometry ---------------- fdisk -l ----------- Disk /dev/sdb: 493 MB, 493879296 bytes 255 heads, 63 sectors/track, 60 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start