Displaying 20 results from an estimated 900 matches similar to: "CentOS 5.3 installation on HP DL380 R05 server"
2006 Mar 10
1
Re: Install Red Hat AS 4 from iLO on a HP DL380?
On Fri, 10 Mar 2006, Herta Van den Eynde wrote:
> I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4.
> Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the
> BIOS.
> As soon as the installation starts, i.e. even before you get to the point
> where you can enter "boot" and whatever boot options you want to use, the
2009 Feb 26
3
HP DL380 G5 with TE420
Hi
I'm having problems getting the TE420 working in HP DL380G5 servers.
The cards don't seem to be detected 100% by the BIOS. With two cards in the
server they are never detected.
things I've tried:
1 Update firmware to latest (P56) for the server
2 change irq settings
3 disable all onboard devices on server and remove raid controller
4 different cards in different slots
What I
2005 Aug 16
1
preferences in used Compaq Proliant DL380 G1 vrs DL380 G2 etc
greetings,
for those of you in the know, may i have some assistance in helping to make
better decisions in purchasing more used server toys to install CentOS on
please? :-)
in the Compaq Proliant Rackmount DL380 line, the one that looks like the
older 1850R is called a G1 meaning Generation 1 right?
and then the DL380 G2 is a redesign that is gray and just has 6 drive bays
up front correct?
2011 Mar 24
6
Kernel Panic on HP/Compaq ProLiant G7
Hello Everyone,
I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was
2005 Jul 21
1
SOLVED: TE410P card in an HP-Compaq DL380 G4 server
Hi to all out there using HP DL380 G4 servers,
i found a way to get the Digium TE410P with older firmware running on a
HP-Compaq DL380 G4 Server! Here's the step-by-step description:
1. download the latest BIOS (in my case it was 4.04 from date:
06/02/2005) for
the HP-Compaq DL380 G4 using the
"Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51)
Servers"
Link:
2007 Feb 09
1
HP DL380 G2 does not boot off local disk from PXE boot menu
Hi, all:
I can't make my HP DL380 G2 servers to boot off local disk by using
"default local" line in my PXE boot menu.
For fully automated server setups, I have configured all my DL380
servers to always do PXE boot. By manipulating the default boot option
in boot menu, I can control a server whether to install a new OS via
kickstart or just boot off local disk. This scheme works
2007 Mar 05
2
TDM400P/FXS in a HP DL380 G5
The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector
available to attach to a card that needs more power than the PCI bus can
provide, like the TDM400P when FXS modules are used. HP has confirmed that
there is no part they sell to give you such a connector, and Digium says
their business edition folks got it to work, but only by doing nasty
warranty-voiding things to the
2005 May 20
1
CCISS driver on HP DL380 G3 ?
Hi.
I am trying to boot Xen 2.0.5 on an HP DL380 G3. It won''t. The box has
an "HP Smart Array 5i" that when running normal Linux is handled by the
CCISS driver. I suspect that this is what is not supported in the stock
Xen kernel. Am I correct that I need to build a kernel from source ?
According to
http://lists.xensource.com/archives/html/xen-devel/2004-11/msg00709.html
there
2005 Nov 09
1
compaq dl380 raid 5 striping size using built in scsi controllers ??
greetings
pre centos install raid5 setup on a compaq dl380
is asking for stripe size.
16kb
32kb
64kb
i am using one of the built in controllers and the machine has just a gig of
ram and 4 18.2 gig 10,000 rpm drives
machine will be an email server with simple web hosting as well.
suggestions?
thanks
- rh
--
Robert Hanson - Abba Communications
Computer & Internet Services
(509)
2011 Jul 11
1
centos 6 boot and install on hp dl380 G4
Hello List,
i downloaded centos6 x86_64. With DVD-iso1 i made a booteable usb-stick
(universal usb installer 1.8.5.7).
When i boot my HP ProLiant DL380 G4 from the stick, the CentOS boot
screen comes up and and the message
"Automatic boot in xx seconds..." appears.
* When i do not hit any key, the seconds are counted to zero an then it
starts again at 10 seconds - again and again.
*
2014 Aug 21
3
HP ProLiant DL380 G5
I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It
has eight 750GB drives in a hardware RAID6 array. Its acting as a
host for a number of OpenVZ containers.
Seems like every time I reboot this server which is not very often it
sits for hours running a disk check or something on boot. The server
is located 200+ miles away so its not very convenient to look at. Is
2010 Dec 22
2
Problem compiling 2.6.32.x pv_ops kernel, centos 5.5 i386, HP DL380 G3
Good afternoon everyone,
I''m trying to compile the xen 2.6.32.x pv_ops kernel on centos 5.5 with i386 quad core xeon system (HP DL380 G3). Having some issues during the kernel compile one of which related to intel agp so I just removed it from .config and didn''t come across it again.
This error here has got me stumped though:
drivers/built-in.o: In function
2005 Mar 07
1
[Fwd: RE: Re: TE410P card in an HP-Compaq DL380 G4 server]
Was there any resolution on this I also have a TE410P in an box with an
Intel E7501 chipset?
-Vickers
-------- Original Message --------
Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4
server
Date: Tue, 8 Feb 2005 11:13:24 +1030
From: Peter Childs <peter.childs@nec.com.au>
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
2005 Oct 28
3
prepare for centos on compaq dl380 G1
greetings
i have a few dual P3 Compaq 1850R units and use compaq smartstart 5.5 on
them before a CentOS 4 load
i have acquired some dual P3 Compaq DL380 G1 i.e. Generation 1 units and am
wondering which specific smartstart download i should be using for them from
this URL below
h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp
would someone please share their experience
2006 Jan 10
0
4GB on HP DL380 G4 on FC5 test1
Hi,
We are running FC5 test1 on some HP DL380 G4 servers with the stock xen
and xen kernels supplied in FC5 release.
We have 2 servers, one has 6GB of RAM the other 4GB. Both machines
crash (lock up) on boot, I would have hoped to see 4GB of RAM and
functional Xen in either case. Last message I see is related to PCI
devices, I can try to capture the exact point of crash if it''s
2007 Feb 15
4
Anyone running Xen on HP DL380 G5? Intel 5150 and 5160 CPU''s?
I''ve got a client demanding the use of HP DL380 G5''s, for various
historical reasons, for a server room. I''m going nuts trying to figure
out if the available CPU''s for them support VT, so I can avoid building
them a separate Windows box.
Unfortunately, the local web proxy is overloaded, so actually browsing
the JavaScript/image loaded web pages for HP is
2005 Aug 10
1
additional boot options with older Compaq 1850R and DL360 and DL380 units
greetings
does the list at this url cover *all* options or are there some hidden or
newer ones by chance?
http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html
i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit
is an 1850R with dual 500Mhz. If you need more info please let me know. it
is a basic unit with raid controller and a Gig of DRAM etc.
2012 Aug 09
0
HP DL380 g3
Hi,
Anybody on the list running CentOS 6.3 on the above. If so do you have HP psp 9.10 installed
and working without getting the following error?
cmahealthd[4406]: segfault at f ip 009ff06d sp bfb6fdc4 error 4 in libc-2.12.so[98e000+18c000]
Do you have any version of the psp working without error?
Thanks,
--
Stephen Clark
*NetWolves*
Director of Technology
Phone: 813-579-3200
Fax:
2002 Jan 10
0
Re: syslinux 1.65 doesn't work with Compaq DL380 G2
Peter Bowen wrote:
> If I use an initrd, the kernel will hang or panic right before starting
> kswapd. The same kernel, if used without initrd will boot fine. On
> other non-Compaq Proliant machines it works fine.
>
I have a guess as what this bug might be. Could you send me the E820
BIOS info for this machine, plus the sizes of the kernel and initrd?
I'd like to verify my
2005 Jun 15
2
Is a new HP-dl380 dual XEON 64 bit or 32 bit
Ho can I tell if a new xeon is 32 bit or 64 bit ?
--