similar to: Software RAID resync

Is my new 300GB RAID 1 array REALLY going to take 18936 minutes to sync!!???

I have a 750Gb 3-member software raid1 where 2 partitions are always present and the third is regularly rotated and re-synced (SATA disks in hot-swap bays). The timing of the resync seems to be extremely variable recently, taking anywhere from 3 to 10 hours even if the partition is unmounted and the drives aren't doing anything else and regardless of what I echo into

Dear all, I'm not used to handling software raid. I've inherited a server which has raid 10 set. one of our disks failed, and it's to be replaced today. My question is; any hint how to add this new disk to the existing raid array ? first thought is :- Create identical partitions as other disks in the array i'd like to add it to.- add it to raid. Though i'm extremely worried of

Hi, Has anyone had any experience with Intel Vroc[1]? I'm possibly having to deal with a new server with such technology and can't find much (real world) information about it. Looking at the specs it's basically a glorified fake raid which usually turns on my alarm bells. Has anyone done any testing, how does it compare with "real" raid or software raid? Cheers, Lucian [1]

Hi all, I would like to detect all strings in the vector 'content' that contain the strings from the vector 'search'. Here a code example: content <- data.frame(urls=c( "http://www.google.com/search?source=ig&hl=en&rlz=&=&q=stuff&aq=f&aqi=g10&aql=&oq=&gs_rfai=CrrIS3",

Greetings All- I'm about to embark on some remote management testing and need a way to login to a remote system running CentOS 4.x/5.x via SSH, su to root (using a password), then execute a command. I currently login to the boxes using key based SSH like this: ssh -i ~/remote_key admin@$REMOTEIP Then, I SU to root. However, if I try to do this automatically like this: ssh -i ~/remote_key

I have searched this forum with keywords contour and percent, it only give one irrelevent result. My problems is how to plot contour in percent. In my figure, I have use kde2d to generate density of an array with two dimension point. Using image and contour could plot it. But the line contour generated represent absolute value of population, not how much pecent point within this cycle. So, i there

On Fri, Jun 28, 2019 at 07:01:00AM +0200, Nicolas Kovacs wrote: > 3. Here's a neat little trick you can use to speed up the initial sync. > > $ sudo echo 50000 > /proc/sys/dev/raid/speed_limit_min > > I've written a detailed blog article about the kind of setup you want. > It's in French, but the Linux bits are universal. > >

Excuse me here if I am asking a question already asked, but im having some problems when entering "sudo apt-get update" in terminal. I get these errors; This is derived from problems with update manager so I thought id try the terminal to update. I have version 8.04.1 W: A error occurred during the signature verification. The repository is not updated and the previous index files will

Hello list. The next days we are going to install Centos 7 on a new server, with 4*3Tb sata hdd as raid-5. We will use the graphical interface to install and set up raid. Do I have to consider anything before installation, because the disks are very large? Does the graphical use the parted to set/format the raid? I hope the above make sense. Thank you in advance. Nikos

I plan to resync the zfs-crypto gate to onnv_73 to pickup some zfs core fixes and not get too far behind. I''m also planning for alpha release set of binaries by 1st November. I''ll send an update of what the alpha binaries will have working nearer the time. -- Darren J Moffat

Hi All, Anyone know the sip header to send to a Linksys to resync it's config file? Thanks. JR -- JR Richardson Engineering for the Masses

Hello, After some fiddling with the server now I have broken RAID1 with the "current" mirror on the disk with few unreadable sectors. If I try to re-add other disk to the mirror resync goes till those bad sectors and then starts from the beginning. And so on. Is it possible to somehow force resync to continue even after errors? Manual resync with dd would require a bit too long

We have several CENTOS 4 and 5 servers. ALL CENTOS servers have NTP setup to sync time server. Several days ago due to power outage all servers are reboot. Due to DNS server did NOT up quickly, CENTOS servers start up and can NOT find time server. For CENTOS 5.X servers, it did quickly resync to time server after 30 minutes. For CENTOS 4.X servers, it have been 3 days still NOT sync to time

Has anything changed in updates that would affect md raid1 resync speed? I regularly swap a 750G drive and resync to keep an offsite copy and haven't paid enough attention to known when things changed but it seems to take much longer to sync than it did months ago, even if I unmount the partition and stop most other processes that might compete with it. -- Les Mikesell

Hello, I have a c5 box with a 6 drive raid 6 array. I was going away over Christmas so I was shutting the machine down, I noticed a raid resync (on the raid 6 array) so i stopped it, using the command # echo "idle" > /sys/block/md5/md/sync_action then shut the machine down. A week later I turned the machine on and started copying data to it around 24 hours later a raid resync

Hello, i'm new to dovecot and this list. Dovecot works very well after all! I now have a small problem, maybe there is a solution. For automatically spam learning i've created a maildir folder called "spam learn". Every hour spamassassin scans this folder and learn from the mails or files at this folder. After this learn i move the files to trash. If at this moment a client

I changed some quota options in my dovecot config (eg. excluded folders) but afaik this only affects new mail and there is no magic command to recalculate the quota (or is there?). So I wrote this little python script to do this, maybe someone finds it useful. It can output the sql statements (dovecot 1.0/1.1 and 1.2 format) or just print out quota usage to console. Download at :

Hi, when I specify a slash a mailbox name on the command line of doveadm force-resync, it throws a panic. I'm not sure this is considered a bug. mail01:~# doveadm force-resync -u user1 at example.org / doveadm(user1 at example.org): Panic: file mailbox-list-fs.c: line 150 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) doveadm(user1 at example.org): Error:

Hi list, I am using dovecot 2.2.27 (c0f36b0) on two servers with (dovecot) replication between them. I do not use dovecot-directors or -proxies. I just have a floating IP on the servers to do failover. I had the problem today that in one user's INBOX and one if his mailfolders got flooded with hundreds of thousands of duplicates. How this happened is another issue (of someone has an idea it