similar to: 2 internet connections and one for backup

Does anybody use tripwire on centos 5? Has anybody checked that: http://www.linickx.com/archives/281/tripwire-2411-rpm-for-centos-redhat-rhel-4 on centos5? M. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have a basic router that is shaping traffic, and it seems to be working at the moment. We have a 100Mbit connection to the internet, however we get charged for each mbit that we use and so have to shape/limit the traffic to avoid huge bills and my boss getting cross!! We have a /29 subnets set up as follows: tc qdisc add dev eth0 root tbf rate 0.8Mbit latency 50ms burst 10k tc qdisc add

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Hi have set the following tbf tc qdisc add dev eth0 root tbf rate 0.5mbit \ burst 5kb latency 70ms peakrate 1mbit \ minburst 1540 I want to add a filter so the ip traffic pass from it.. plz help me __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html

Hi all, I have two internet connections, both connected to eth0 and eth1, one is 1mbit, the other one is 3mbit. Now I want to use _both_ at one time via round robin or such. Anyone have an idea/docu how to set that up? Thanks in advance. -- ciao, Marc _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi! Is it HTB fully compatible with BOND interface? I have this setup (mode= fault tolerance) : BOND0 -> ETH0 + ETH1 BOND1 -> ETH2 + ETH3 ( http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/networking/bonding.txt ) HTB work very well with Class over BOND0. If I add Class for BOND1 it generate balance errors. Also with HTB.init

I'm thinking of changing raid 1 to raid 5 (phisical --> in bios, now i've got 2 disks in raid1, i want to add 3rd disk). Will centos work correctly? cheers Mariusz -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

I've checked my system by aide and i've received information: changed: /bin changed: /bin/tar changed: /bin/mv changed: /bin/cp changed: /bin/ls changed: /bin/vi i don't remember that I changed those commands, what does it mean? Somebody broken in? or those commands are changed normally? -- This message has been scanned for viruses and dangerous content by MailScanner, and is

Hello, Iam providing access to many images on a share to windows users from my linux samba over the internet. The problem is that I need thumbnail viewing because of the nature of this library and thumbnails take to much time to load it seems as though it is actually loading the entire image to then display the small thumbnail. Is this true? Also isnt there some kind of caching that can be

Dear list, I have the problem that child classes don''t seem to issue the parent class to borrow from their parent. This is a simplified version of my script: tc qdisc del dev $DEV root tc qdisc add dev $DEV root handle 1: htb default 10 tc class add dev $DEV parent 1: classid 1:1 htb rate 10mbit tc class add dev $DEV parent 1:1 classid 1:10 htb rate 1kbit ceil 512kbit #groups tc

hi all, I''m trying to do the following: tc qdisc add dev eth0 root handle 1: htb default 15 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 1mbit tc class add dev eth0 parent 1:1 classid 1:15 htb rate 512kbit ceil 1mbit what I expect: limit outgoing traffic to 1mbit, start rate is 512kbit and let it grow up to 1mbit (correct me if i''m wrong here) so, here is the problem

Hi, I''m trying to setup QoS in my TSL box. Following to mailing list reccomendations I changed PSCHED_CPU but can''t get accurate shaping with HTB. I have disabled HYSTERESIS also (by setting it to 0). I have Intel Celeron 1.8Mhz (TSC supported I think). ******** My script ****** tc qdisc add dev eth0 root handle 1: htb default 22 r2q 10 # Class corresponding interface

i got this problem, i want to shape my clients internet bw, but i don''t want to shape my local network traffic. For information, my clients using wireless to connect to my router[192.168.1.254]. when the clients request data from internet, example download from www.download.com, i want to shape his bandwidth, but when the clients [192.168.1.1] want to download from my file server example

Hello all, My company is sharing it''s internet access with a neighbor and the neighbor in question was eating our bandwidth (both in upload and download) most of the time. I finally set up a linux router to limit the incoming/outgoing bandwidth to his network by adding a tbf on eth0 interface and eth1 interface of the router (neighbor is behind eth1 and we are in-between him and the

hello. i have following setup: a machine (winChip 200mhz cpu, 32mb ram, linux 2.4.28) acting like a bridge with 2 interfaces (eth0 - to our ISP, eth1 - to our network) machine does not have any IP there is a 802.1q vlan eth0.2 eth0.2 and eth1 are bridged in br0 i have one 4mbit link which i share with my friend, i have 3mbit and he has 1mbit all our IP addresses are public and we have the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there! Well, as an exercise, I try ''simulating'' an adsl link (just the speed ;o)) with a GRE tunnel and HTB for bandwidth limiting. Typically in germany adsl has about 1024kbit downstream and 128kbits upstream (yes, there are others ;) but these are what I have) - which are the values i try to simulate. Here is the snipped that

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

hi All, seems like a kernel problem when I do the following on kernel 2.6.12.5 tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 512kbit ceil 1mbit all works as expected (traffic is limited to 1mbit), but this doesn''t work the same way on kernel 2.6.14.3, and actually only ceil has effect (in my previous message I mentioned

Hi I have strange problem. same traffic control rules when i started it manual they work OK, but when i started it from crontab / twice per day / doesn''t work correctly ... look like delete rules doesn''t work ... any ideas where to look for problem ? i use debian sarge Linux 2.6 kernel , #!/bin/bash TC=/sbin/tc DEV=eth1 echo "Delete all rules" $TC qdisc

Hi, I''m trying to perform some (what I consider) basic traffic shaping on our network utilising HTB. I have mostly reused the example on the lartc.org site: tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 24k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 50mbit ceil 80mbit burst 19k tc class add dev eth0