similar to: AHCI at boot?

Hello All, I have a machine that crashed. Some part of the motherboard (power supply-related) went south. The motherboard, CPU and memory have been replaced with a much newer architecture. The OS and data are intact on two SATA drives that were RAID1 with LVM. I am going to use 'linux rescue' to recover the LVM backup so I can mount the RAIDs (there were two) in a new CentOS

I saw something somewhere about AHCI support requiring kernel 2.6.19 or later. But the current CentOS/RHEL stable kernels are 2.6.18 I'm trying to run CentOS/RHEL in a VirtualBox vm, which by default creates sata virtual disks with an AHCI virtual controller. These virtual machines are quite unstable, and I'm wondering if the AHCI virtual controller is the problem. I do have a real

Hi, I'm trying to install an old fujitsu siemens econel 50 server. It uses an Intel chipset with ICH6R sata subsystem known as fakeraid. I have configured a Raid 1 with two 160GB hds. FS and Intel both provide a driver called megaide on a driver disk to use fakeraid and here is the problem: - The readme tells me to install with the "nostorage" kernel option and I can load the

My friend has an external sata hard disk, and likes the hot-plug feature. However, that works only if the appropriate sata setting in the motherboard bios is set to AHCI (IDE compatibility and RAID are two other options, but hot-plugging doesn't work with them). The machine has WinXP atm, while Linux is about to be installed in the following couple of days. Now, on wikipedia I read that

> BOOTING AND ACCESSING 6 SATA DRIVES USING AHCI > > I have installed b48 running 64 bit succesfully on > this machine using dual core Intel Woodcrest > processors. The hardware supports up to 6 SATA II > drives. I have installed 6 Western Digital Raptor > drives. Using Parallell ATA mode I can only see 4 > drives. Using ZFS the sustained throughput is a > disapointing

We're seeing some strange timeout errors on some new Supermicro X9DRT-HF MB's we here when combined with KINGSTON HyperX 3K SSD's It seems that when connnected to the second channel reads often timeout stalling all IO under 8.3-RELEASE-p3 When this happens we see:- Jul 27 14:35:59 lon059 kernel: ahcich1: Timeout on slot 0 port 0 Jul 27 14:35:59 lon059 kernel: ahcich1: is 00000000 cs

OK, it seems that the kernel I have (stock CentOS 4.7: 2.6.9-78.0.22.EL i686) seems to gronk the nVideo SATA controller in AHCI mode. It is NOT able to deal with the SATA DVD Burner I have. It is a "Sony Optiarc DVD Burner with LightScribe Black SATA Model AD-7241S-0B LightScribe Support". Is there some special magic I need to do? Here is the relevant bit from the boot up (SATA ports

I have one HP Proliant DL320 G5p, where for some reason, the AHCI mode is not enabled. According to server specs, it should have AHCI/NCQ capability, but ata_piix module gets loaded during bootup, not ahci module. Any ideas how to enable AHCI mode? lspci output: # lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation

Hey folks, So what's the word on AHCI and bios drive geometry? I'm having a real pain of a time trying to get some 750gb sata drives running on my FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry I suggest to sysinstall, something complains of an invalid disk upon booting it. Actually, in AHCI mode the bios screen doesn't report any information on

Hello, I am trying to install Centos on sata ahci. The installer first waits few minutes while loading ahci module. Then, the installer cannot detect any disk during the partitioning phase. What might be the problem? I have switched to IDE in bios and it still is the same. Best regards, mjb

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed

Greetings, Wondering if anyone could assist with this. I have many SuperMicro 5015B-MTB servers. These all have the X7SBi Motherboards. After upgrading to CentOS 5.3 the Hard Drive LED's on some of the servers started blinking red(drive fail) but all is functioning normally. All servers are running raid 1 arrays with MDADM. Primary drive does not blink, but all others do including spares.

CentOS Errata and Enhancement Advisory 2016:0026 Upstream details at : https://rhn.redhat.com/errata/RHEA-2016-0026.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 6b5d15024f2fa78a95bd5fc3722b219bd4aaab85e83caf64eff877c621dd4f9e kmod-ahci-327_RH1-1.el7_2.x86_64.rpm Source:

https://bugs.freedesktop.org/show_bug.cgi?id=102192 Bug ID: 102192 Summary: Dell XPS 15 9560: PU: 1 PID: 58 at drivers/gpu/drm/nouveau/nvkm/subdev/mmu/gf100.c:190 gf100_vm_flush+0x1b3/0x1c0 [nouveau] Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All)

Hi list I'm havining problems with a E1 Digium Card (TE120) here are the description of the problem: Case 1: Zaptel 1.4.8 Kernel 2.6.22 The system start working correctly, but aleatory the asterisk prosess give a kernel panic with the messages: Process asterisk (pid: 7321, ti=dfed6000 task=f7dbf030 task.ti=dfed6000) Stack ......

Hello, I have an issue with my XEN system. I suspect that it might be a bug, but I''m no linux expert, so I don''t know. Here is my problem: I have an ASUS P7P55D-E Premium motherboard, and a Western Digital Caviar Black SATA-III 1TB hdd. I am trying to use AHCI. The dom0 is an Arch Linux. The dom0 boots fine until Intel VT-d is enabled in the BIOS. When I enable it Arch

Hello All, I want to build a home file and media server now. After experiment with a Asus Board and running in unsolve problems I have bought this Supermicro Board X8SIA-F with Intel i3-560 and 8 GB Ram http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIA.cfm?IPMI=Y also the LSI HBA SAS 9211-8i

Is there some reason the ahci kernel module is *missing* from the 2.6.9-89.0.16.plus.c4 kernel? It is in the standard 2.6.9-89.0.16.EL kernel. Is this due to an oversight or is there some sort of conflict? I wanted to add IEEE1394 support to my system running CentOS 4.8. I *looks* like what I need to do is download the kernel SRPM and patch the config to include the IEEE1394 modules and

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6.

Hi, we bought some machines with 2 x quad core Xeon E5405 processors and installed centos 5.3 on them. My problem is that I can't get the cpuspeed service to work. No driver seems to claim responsibility for the throttling and the fallback "modprobe acpi_cpufreq" in the cpuspeed init script just yields a "No such device" message. According to the acpi information the