similar to: hda: no DRQ after issuing WRITE

How do I check if the proper sata drivers are being loaded? If they are not what can I do other then rebuilding the kernel? Thank you in advance, Randy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

We run several RH7.2/7.3 servers & recently 2 of them, although still working fine, have started to show kjournald as generally using over 50% cpu% on 'top' - virtually continuously. Free cpu% generally less than 25% now! Both machines are also using software RAID5 EIDE ....... otherwise are standard server installs. Any info on what kjournald is & why it should have recently

Hello Folks, We have 2 (identical hardware) busy public 2U rack servers, both have several hundred users & peak email (for example) deliveries at 300/5min during the daytime. Both servers run RAID1 over 2 EIDE disk drives. One server is fine - it never has problems - it is running RH7.3 and CPU loads are normal. The other server has constant disk activity & kjournald at CPU load of

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

I have a workstation with a Gigbyte board and an Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) that's apparently getting bitten by https://bugzilla.redhat.com/show_bug.cgi?id=502499 It's running CentOS 5.4 32 bit, and the user is suffering from high load and sluggish response whenever a disk write of more than a few MB is made. iostat shows the disk at 100%. [root at marge

I am running RH 7.3 with kernel 2.4.18-27.7.x. Recently I have added a new 60GB Quantum IDE hard drive to the server. I have set it up as a MASTER on a separate IDE channel. Two partitions on the /dev/hdc are /dev/hdc1, /dev/hdc2 - both using ext3. For more detailed HDD parameters, this is 'hdparm -i /dev/hdc': ----------------- /dev/hdc: Model=IC35L060AVV207-0, FwRev=V22OA66A,

Hi all! While I was having some fun, testing different filesystems at home and making some benchmarks, I hit a bug when running Postmark in an ext3 partition mounted with data=journal. I repeated this test twice and got the same results under Linux 2.5, also it was not found while mounting with data=writeback or data=ordered or under Linux 2.4. I don't know if it's a know problem or

Hello all, I am new to this list and hope that my mail is not OFF TOPIC. After looking around for 2 months now, to find a solution, I will try it here now. Now the scenario: I bought a new cool dell laptop: INSPIRON 8100, 512MB RAM, NVIDEA GeForce2Go 32MB, 30GB Hitachi hard disk and a DVD. I bought it with WinME preinstalled, because it wasn't possible to get it with linux nor without an

Hi Gang, I recently rented a server at a datacenter with Centos 5.7 X64, Q9550 Processor, 8GB Ram, and dual 250GB SATA HDs (with 16mb cache). They had loaded it with KVM, and installed a 30-day trial of Virtualizor as the front-end for KVM. I was so impressed with how fasts the guests ran that I want to build a few of these machines for myself. I just installed one: same Q9550 processor, 4GB

While investigating erratic performance on one our our servers, I'm getting some very odd performance stats coming from vmstat. What initially appeared to be happening is the machine goes into a hard loop in some mod_perl webserver code. Now there still may be an issue with the code, but my code examinations show no possible way this could be happening, but what I'm writing to you

Hi... I have a Dell Latitute with an ATA/ATAPI-5 T13 1321D and it would seem that my disk access is extremely slow. I have the latest updated kernel from RedHat 8.0 kernel 2.4.18-27.8.0. Somehow I think it is related to the UDMA stuff (shows my level of understanding). I have run hdparm and although I think I should at least udma level 5, I have at most udma2 listed. Is this a kernel

I have 3 OQOs with Centos and I frequently get the following error messages: Jan 28 13:18:07 oqo3 kernel: hdc: status timeout: status=0xd0 { Busy } Jan 28 13:18:07 oqo3 kernel: ide: failed opcode was: unknown Jan 28 13:18:07 oqo3 kernel: hdc: no DRQ after issuing MULTWRITE Jan 28 13:18:07 oqo3 kernel: ide1: reset: success I have Fedora 10 on a fourth unit and it NEVER gets this message. I

While writing a file to an ext3 filesystem, i get some drive errors on the console. I guess is a drive/ide related problem more that a ext3 one, but anyway the debug output is here if you want to take a look. And, by the way, what means that DRQ thing?? Oct 7 20:31:36 fargo kernel: (journal.c, 218): kjournald: kjournald wakes Oct 7 20:31:36 fargo kernel: (journal.c, 202): kjournald:

My apologies in advance for asking such an elementary question. I called myself searching the Installation Guide and Deployment Guide, with no success. The situation is that I bought a Lite-On ATAPI iHAP122 that will not burn DVDs unless I use hdparm to turn dma off. I bought that drive because it was a rare beige drive. Until I can find a decent DVD burner and/or get a Windows machine put

Hello there, I've got a question about SATA. I've got ASUS P5GC-MX/1333 with ICH7. (SATA2 support) A few HDD with SATA2. system: uname -a FreeBSD diablo.miekoff.local 9.1-STABLE FreeBSD 9.1-STABLE #1 r246666: Tue Feb 12 00:19:07 MSK 2013 root at diablo.miekoff.local:/usr/obj/usr/src/sys/DIABLO64 amd64 camcontrol info camcontrol iden ada2 pass2: <ST3500320AS SD1A> ATA-8 SATA 2.x

I have a problem where an Asterisk server is sending a premature DRQ... Not sure why.. Here's the setup - Asterisk using inAccess networks H323 replacement channel driver Connecting to a Lucent iMerge... The call connects fine - I get the out of the box greeting - but after exactly one Minute - the call terminates. I have had this problem on multiple different Asterisk configs... I'm

Hello, With reference to the problems listed below. I too am having incredibly long start up times. I''m talking minutes here (around 5 minutes). My configuration is not complex I don''t think. We are you using ldap too and the settings are bellow. The network is up as I''m restarting shorewall whilst the machine is running. Any suggestions? Is there no way to

When I copy a file(13Megs) from /home/ to /tmp/, sync takes almost 2 minutes. When I copy the same file to /usr/local/, sync returns almost right away. Both filesystems are ext3 and are on the same harddrive. When sync is running, the harddrive light stays on but I don't hear it doing anything. dmesg doesn't show any errors either. Below is the `time` output for each command. If you

root at five-72 ~ # dd if=/dev/zero of=/dev/sdb bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 8.67101 s, 121 MB/s root at five-72 ~ # parted /dev/sdb GNU Parted 2.1 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel gpt (parted) print Model: ATA ST3000DM001-1CH1 (scsi) -->

Okay, I've been chasing performance for a while now. I have no idea if I should be trying to get better performance or if I'm getting all I can out of my hardware. Here is the information: /sbin/hdparm -I /dev/hdd /dev/hdd: ATA device, with non-removable media Model Number: ST328040A Serial Number: 7BY034XB Firmware Revision: 3.07 Standards: