similar to: kmod-kvm

Hello After updating to the 2.6.9-42 kernel, one of my boxes stall during boot with hdc lost interrupt ide-cd:cmd 0x3 timed out The older 2.6.9-35 kernel boots fine. This is a Compaq Proliant PL360. The odd part is, I have another, identical Proliant that runs the new kernel just fine. Any idea what is happening? Thanks Jamie -------------- next part -------------- A non-text attachment

This morning I applied the recent updates to CentOS-5.6 on a test and development host and observed this: Updating : kmod-kvm 4/20 WARNING: Can't read module /lib/modules/2.6.18-194.32.1.el5/weak-updates/kmod-kvm/kvm.ko: No such file or directory WARNING: /lib/modules/2.6.18-194.32.1.el5/weak-updates/kmod-kvm/ksm.ko needs unknown symbol

RHEL 3 doesn't have a dynamic /dev. kmod-virtio creates devices nodes for vdX block devices based on what the major number of virtblk was at the time it was installed. This is, in turn, based on the order the modules were loaded in initrd. To try to preserve this precarious state of affairs, when adding virtio drivers to a new initrd we always load the same drivers as kmod-virtio in the same

Hello all! I have actual need to build a custom kernel.(Have to change Preemption model to 'server' and turn off Preempt the big kernel lock, ect) I have heard bits and pieces about these changing defaults in newer kernels but I haven't investigated that yet. This of course is not a problem at all, made my needed changes to the source code and successfully build both the standard

CentOS Virt, I'm looking for an RPM for the kmod-kvm processor specific modules (kvm-intel or kvm-amd). I've been using L. Farkas's repository, but after the recent kernel updates, I'm out of luck. Best Regards, Michael Schenck -------------- next part -------------- An HTML attachment was scrubbed... URL:

Since December there have been several kernel updates to the centosplus repository for centos4... but no updates to kmod-xfs or kmod-drbd82. Latest kernel is 2.6.9-78.0.13.plus.c4, but latest kmod-xfs is 2.6.9_78.0.5.plus.c4. Latest drbd82 kmod is also for 78.0.5. I know there was a mention on the list that these modules are not kernel dependent anymore... but yum and rpm seem to indicate

hi, I'm testing the new CentOS 8, seems latest kmod-kvdo-6.2.0.293-50.el8.x86_64 does not contain modules for latest kernel kernel-4.18.0-80.7.1.el8_0.x86_64 ?rpm -ql kmod-kvdo-6.2.0.293-50.el8.x86_64 /etc/depmod.d/kvdo.conf /lib/modules/4.18.0-79.el8+2.x86_64 /lib/modules/4.18.0-79.el8+2.x86_64/extra /lib/modules/4.18.0-79.el8+2.x86_64/extra/kmod-kvdo

I am having trouble using the realtek wifi chip in my new tp-link usb wifi dongle. Upon plugging it, the device gets registered by the kernel (in /var/log/messages), but that's about it, no network device is being created (iwconfig does not see it, nothing else works). A few google searches later I found out that this realtek chip is not supported by the kernel and requires a driver, and that

Hi ! Not very blocking because the smp module loads perfectly. # yum --exclude=kmod-drbd*\plus\* install kmod-drbd Setting up Install Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Reducing CentOS-4 - Plus to included packages only Finished Parsing package install arguments Resolving Dependencies -->

Everyone, On August 2, my desktop unit updated with kmod-nvidia-430.40-1.el7_6.elrepo.x86_64nnn which broke yum having a multiple of dependencies not being present. I uninstall kmod- dvidia with the hopes that a fresh install would fix the provlem, but it did not. nvidia-detect returns : kmod-nvidia An Intel display controller was also detected I was hoping that this was a repository problem

Hi all, I would like to rebuild a kmod.src.rpm package for a specific kernel. When I try to do it, this message appears: Building target platforms: i686 Building for target i686 error: Failed build dependencies: kernel-xen-devel-i686 = 2.6.18-98.el5 is needed by mymodule-kmod-0.1.5-2.i686 kernel-PAE-devel-i686 = 2.6.18-98.el5 is needed by mymodule-kmod-0.1.5-2.i686. Is

hi all, latest kmod update 20-15.el7_4.6 is broken on our systems, while previous 20-15.el7_4.4 was working fine (and downgrading fixes the issue). the issue is with modules from mellanox kmod rpms that are symlinked in the weak-updates dir. the config files in /etc/depmod.d look ok (and do work with previous version): dist.conf has weak-updates after built-in, and mellanox kmod rpms ship a

On 25/08/2019 15:50, Gregory P. Ennis wrote: > > On 25/08/2019 02:28, Gregory P. Ennis wrote: >> >> On Sat, Aug 24, 2019 at 3:21 PM Ian Mortimer <i.mortimer at uq.edu.au> wrote: >>> >>> On Sat, 24 Aug 2019, Gregory P. Ennis wrote: >>> >>>> On August 2, my desktop unit updated with >>>>

On 2019-01-22 11:01, Akemi Yagi wrote: > On Tue, Jan 22, 2019 at 7:54 AM Marko Vojinovic <vvmarko at gmail.com> > wrote: >> >> >> I am having trouble using the realtek wifi chip in my new tp-link >> usb wifi dongle. Upon plugging it, the device gets registered by the >> kernel (in /var/log/messages), but that's about it, no network device >>

when I do yum update, elrepo offers kmod-nvifdia, but yum does this: --> Processing Dependency: kernel(sme_me_mask) = 0x17fbce60 for package: kmod-nvidia-390.48-2.el7_5.elrepo.x86_64 --> Processing Dependency: kernel(reservation_object_add_excl_fence) = 0xea98efc0 for package: kmod-nvidia-390.48-2.el7_5.elrepo.x86_64 --> Processing Dependency: kernel(drm_vblank_init) = 0xdcd50a49 for

On CentOS 5, the current centosplus kernel doesn't want to play with the kmod-gfs package (because kmod-gfs wants the stock kernel): # yum install kmod-gfs gives me: Transaction Check Error: package kernel-2.6.18-8.1.14.el5.centos.plus (which is newer than kernel-2.6.18-8.1.14.el5) is already installed Should it work, or is there a separate centosplus build that I've not

On 04/18/2017 12:54 PM, H wrote: > A? couple of days ago I submitted a request to ElRepo and kmod-jfs is now available for CentOS 7 as well. > > On 04/12/2017 12:58 AM, H wrote: >> Thank you, installed it and it worked fine. Now I am looking for the same for CentOS 7... It did not look like you have that in your repository? >> >> >> On 3/13/2017 1:09 PM, Nux!

On Sat, Aug 24, 2019 at 3:21 PM Ian Mortimer <i.mortimer at uq.edu.au> wrote: > > On Sat, 24 Aug 2019, Gregory P. Ennis wrote: > > > On August 2, my desktop unit updated with > > kmod-nvidia-430.40-1.el7_6.elrepo.x86_64 > > which broke yum having a multiple of dependencies not being present. > > The latest from elrepo -

On Tue, May 26, 2009 at 1:51 PM, Tru Huynh <tru at centos.org> wrote: > On Tue, May 26, 2009 at 08:16:42AM -0700, Akemi Yagi wrote: >> Here is the updated version: >> >> http://centos.toracat.org/kmods/CentOS-4/xfs/SRPMS/ >> >> Please discard the obsoleted ones (I did not bump the version/release >> number). ?Let me know when your binaries are ready for

On 25/08/2019 02:28, Gregory P. Ennis wrote: > > On Sat, Aug 24, 2019 at 3:21 PM Ian Mortimer <i.mortimer at uq.edu.au> wrote: >> >> On Sat, 24 Aug 2019, Gregory P. Ennis wrote: >> >>> On August 2, my desktop unit updated with >>> kmod-nvidia-430.40-1.el7_6.elrepo.x86_64 >>> which broke yum having a multiple of dependencies not being