similar to: amd mobile on 1 cpu listed in /proc/cpuinfo

I just noticed something interesting with the pv_ops dom0 kernel that I built from Jeremy''s git tree. When I run ''cat /proc/cpuinfo'' the output shows the processors have 0.000 MHz. Everything runs fine I just thought it was interesting. processor : 3 vendor_id : AuthenticAMD cpu family : 16 model : 4 model name : AMD Phenom(tm) II X4

Thank you very much for getting back to me. On 2019-03-07 04:23, Stephan Bosch via dovecot wrote: >> http payload echo (ssl): sequential .................................. : ok >> http payload echo (ssl): pipeline .................................... : ok >> http payload echo (ssl): parallel .................................... : >> FAILED: Test is hanging >> http

> On Aug 12, 2017, at 3:50 PM, Fred Smith <fredex at fcshome.stoneham.ma.us> wrote: > > I had a series of kernel hardware error reports today while I was away > from my computer: > > Message from syslogd at fcshome at Aug 12 10:12:24 ... > kernel:[Hardware Error]: MC2 Error: VB Data ECC or parity error. > > Message from syslogd at fcshome at Aug 12 10:12:24 ...

Paolo Bonzini <pbonzini at redhat.com> wrote: > Il 29/05/2014 19:45, Chris Webb ha scritto: >> Chris Webb <chris at arachsys.com> wrote: >> >>> My CPU flags inside the crashing guest look like this: >>> >>> fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush >>> mmx fxsr sse sse2 ht syscall nx mmxext

Paolo Bonzini <pbonzini at redhat.com> wrote: > Il 29/05/2014 19:45, Chris Webb ha scritto: >> Chris Webb <chris at arachsys.com> wrote: >> >>> My CPU flags inside the crashing guest look like this: >>> >>> fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush >>> mmx fxsr sse sse2 ht syscall nx mmxext

I had a series of kernel hardware error reports today while I was away from my computer: Message from syslogd at fcshome at Aug 12 10:12:24 ... kernel:[Hardware Error]: MC2 Error: VB Data ECC or parity error. Message from syslogd at fcshome at Aug 12 10:12:24 ... kernel:[Hardware Error]: Error Status: Corrected error, no action required. Message from syslogd at fcshome at Aug 12 10:12:24 ...

Chris Webb <chris at arachsys.com> wrote: > My CPU flags inside the crashing guest look like this: > > fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush > mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb lm rep_good nopl > extd_apicid pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic popcnt aes xsave > avx f16c hypervisor lahf_lm

Chris Webb <chris at arachsys.com> wrote: > My CPU flags inside the crashing guest look like this: > > fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush > mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb lm rep_good nopl > extd_apicid pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic popcnt aes xsave > avx f16c hypervisor lahf_lm

On Sat, Aug 12, 2017 at 05:51:33PM -0400, Steven Tardy wrote: > > > On Aug 12, 2017, at 3:50 PM, Fred Smith <fredex at fcshome.stoneham.ma.us> wrote: > > > > I had a series of kernel hardware error reports today while I was away > > from my computer: > > > > Message from syslogd at fcshome at Aug 12 10:12:24 ... > > kernel:[Hardware Error]:

The code was passing sizeof(char *) - not the length of the buffer - to memset. Change the function to take the length of the buffer as a parameter. Fixes the warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? Signed-off-by: Jonathan Boeing <jonathan.n.boeing at gmail.com> ---

Hi, I am trying to get my kickstart file that worked under 5.1 to work under 5.2 centos x86_64. This is the error that I get. On the screen it says Exception occured and gives me the option to save it. This is that file. I dont see any odd that would cause it to crash. Can anyone help. My kickstart file is in the mix below. Seems to be related to network, my line seems fine (I think) for

Il 29/05/2014 19:45, Chris Webb ha scritto: > Chris Webb <chris at arachsys.com> wrote: > >> My CPU flags inside the crashing guest look like this: >> >> fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush >> mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb lm rep_good nopl >> extd_apicid pni pclmulqdq ssse3 fma cx16

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

Hello, I'm trying to get the Android Emulator to run inside a kvm vm on CentOS-6. Apparently the latest Android Emulators cannot run without hardware acceleration so I am trying to get the vm to see the svm cpu flag. Host: $ grep model\ name /proc/cpuinfo | sort -u model name : AMD Phenom(tm) II X4 965 Processor $ grep svm /proc/cpuinfo | sort -u flags : fpu vme de pse tsc msr pae mce cx8

Hi, I have an fc17 server with an Opteron 6128 with a few fc17/16 guests. How can I be sure I'm best matching the guest CPU with that of the server? I've used virt-manager to create the guests, and it currently shows the processor is a "Phenom(tm) 9550 Quad-Core": processor : 1 vendor_id : AuthenticAMD cpu family : 16 model : 2 model name : AMD

Running a 3.14.4 x86-64 SMP guest kernel on qemu-2.0, with kvm enabled and -cpu host on a 3.14.4 AMD Opteron host, I'm seeing a reliable kernel panic from the guest shortly after boot. I think is happening in kvm_unlock_kick() in the paravirt_ops code: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.4-guest #16 Hardware name: QEMU

Running a 3.14.4 x86-64 SMP guest kernel on qemu-2.0, with kvm enabled and -cpu host on a 3.14.4 AMD Opteron host, I'm seeing a reliable kernel panic from the guest shortly after boot. I think is happening in kvm_unlock_kick() in the paravirt_ops code: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.4-guest #16 Hardware name: QEMU

I am trying to streamline the current distribution specific setup and creation of VE''s within OpenVZ with puppet. My first attempt has gone horribly wrong as you will see below. Here''s the script I wrote to replace the redhat specific setup that OpenVZ used: [jleggett@lxp6d15m3 scripts]$ cat redhat-add_ip.sh #!/bin/bash # # Debug - take out later set -x

I have a 4 line batch file that just copies files: copynewr.bat copy c:\msgnet\obj\sign\cmdapi\release\X.exe m:\silentm\update copy c:\msgnet\sign_new\release\Y.exe m:\silentm\update copy c:\msgnet\obj\sign\monitor\release\Z.exe m:\silentm\update copy c:\msgnet\httpupdate\release\ZZ.exe m:\silentm\update When I run the command from a terminal window /usr/local/bin/wineconsole

I have a small program that I am broadcasting out on port 36 and attempting to receive information back. Using "tcpdump port 36" I can see 2 devices responding to me but I get no data. The response my program gets is: Size IP Address Subnet MAC Address ID 20 0.0.0.0 0.0.0.0 00-00-00-00-00-00 Does someone know what I might not be doing