similar to: Migration from VMWare to HP Blade

Hello, I would like to use Intel Blade machine for running Asterisk. Is there anyone who already use Intel Blade server for running Asterisk? Can you please explain, how perform Asterisk with Intel Blade machine? I would appreciate for giving me feedback regarding this issue. Regards Nahid -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have an intermittent problem with my Dell blades, out of 80 blades 69 of them kickstarted Centos 6 fine using PXE The other 11, I get a c0t0 not found error (indicating it is not finding the local disk on the blade). I can remote mount the iso image and do a basic install of centos on these blades, but when I go to do a pxe boot it gives me that error again. I have googled the issue and

I am having an extremely strange issue with a BL460c1 (G1) blade on a c7000 enclosure. I could not for the life of me get the machine to ping the gateway or any other blade on the same enclosure (yes, the subnet mask was correct & quadruple-checked); although pinging to the local IP works. I was almost convinced that it was a network or hardware issue; until I asked someone to try

Hi there. I got myself a pair of old Intel Xeon blades, which I plan to repurpose with CentOS. The model is : HP bl20p-g3 server blade Manual http://h18004.www1.hp.com/products/quickspecs/12322_ca/12322_ca.pdf Now, the main problem with this hardware is that LVD UW SCSI HDDs are hard to find and hella expensive if you find em (and of reduced capacity). Any of you know: 1. If there's any

I'm seeing this on a HP Blade and i'm not sure why this is happning since the nature of the issue is so wierd. I compiled mboot.c with a DEBUG defined in the mboot.c file. In the funciton init_mmap(), it prints the e820 map and on the HP blade this map values come out to be totally random. Some weird numbers which dont make any sense at all. However, if i add a while(1); or a exit(1); at

We've been asked to quote for a large cluster running Asterisk and our ITSP in a box product. The system will be SIP throughout, with mixed codecs. We're considering using Dell blade servers, 1855 or similar, on the grounds that we normally use Dell machines and they work well, but we need higher rack density. Has anyone used these? Any feedback on whether they're

Hello, configuration: - 4 HP Proliant 460c servers in HP Blade - disc array HP EVA 4000 with two controllers HSV200 - OS: SUSE Linux 10 (SLES) x86_64 - ocfs2 - ocfs2_tools_1.2.1-5.6 Problem: all servers share configuration files for cups on ocfs2 volume on HP EVA 4000 1. shutdown -r now - not restart but halt server (perhaps on unmount filesystem) - for all servers used EVA ocfs2 volume same

Anyone running CentOS 7 here in HP Blade BL620c Gen 7 when I use the live DVD the network card can detect and I can use without issue however when I install the CentOS 7 with Server GUI. The network card can no longer detect. I tried to google the driver for this hardware machine but No luck. -- ./Francis

I have a large set of Dell 620 blades fully populated with memory and duel socket CPUs, Centos6.4 image. I have a kickstart that I am using to pxe boot 36 blades. I have two internal drives which are raid1 (two disks formed into one, no redundancy), not san attached In the first set, 9 successfully completed. 7 more built correctly after trying another pxe boot. 2 just wont pxeboot In the

Hi all, I have a Opteron-machine with the MPT SCSI-controller (Symbios 53c1030). At least in i386-mode, mkinitrd does not seem to build a usable initrd for 2.6.13.x (.3 tested) with this kernel. With 2.6.12.6 it works fine. I have not tested this in x86_64 -mode yet. The symptom is that mptbase and mptscsih load, but mptscsih does not discover any controllers nor drives, and things like

Hi forum, I''m currently a little playing around with ZFS on my workstation. I created a standard mirrored pool over 2 disk-slices. # zpool status Pool: mypool Status: ONLINE scrub: Keine erforderlich config: NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 mirror ONLINE 0 0 0 c0t0d0s4 ONLINE

I've just migrated Asterisk from my old Gentoo system to an Ubuntu system, copied across all the /etc/asterisk files and now it fails to work. After brief looks, I find that it can't access: /var/log/asterisk/messages /var/run/asterisk.ctl /var/run/asterisk.pid So I touched these files, and chown/chgrp'd then to user/group asterisk/asterisk. Now, when I run asterisk through

I''ve compiled xen without any problems. but now i have to create an initrd file. When i use the command mkinitrd (without any options) the i''ve got some errors: # mkinitrd Root device: /dev/sda3 (mounted on / as reiserfs) Module list: ata_piix mptbase mptscsih qla2300 reiserfs Kernel image: /boot/vmlinuz-2.6.11.12-xen0 Initrd image: /boot/initrd-2.6.11.12-xen0 Shared

Hello everyone. I am looking for a way to move a CentOS 4 installed production hard disk to another system (which has another hardware). The first has an nvidia sata controller (sata_nv), but the second has a via sata (sata_via). For all the rest of the hardware it can upgrade well I know, but if the sata driver is different, then the system doesn't boot because the proper driver is not

Hi All, I''m getting the attached panic in the hypervisor on a Sun 6270 running xen-testing.hg changeset 19913:6063c16aeeaa. I can run xen-3.3.1 from the standard SLES 11 distribution (which says that it''s changeset 18546 but it has many patches). Any ideas? thanks, dan _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

All, I am running xen3.0.2 and xen unstable on RHEL 4, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! Then system reboot.In grub.conf,I have

All, I am running xen3.0.2 and xen unstable on RHEL 4, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! Then system reboot.In grub.conf,I have

Hi, I have a dell poweredge 850 with centos 4, freshly installed. I'm now trying to add in a fibre -> sata raid enclosure with LSI HBA's in the 850. My problem is the enclosure gets detected first, hijacking sda and sdb from the internal SATA drive and causing kernel panic at boot time. I've tried changing the order in modprobe to the following: alias eth0 tg3 alias eth1

Greetings: I know it's been mentioned before that the tg3 driver in CentOS 3.4 is buggy. I had to revert to 3.4 today from 4 (fresh install) and now I have no link and thus no network. I'm wondering if this is caused by this bug and what the work-around is. Thanks. Brendon Colby

Hello, Perhaps this is a bug, but I thought I'd start with R-Help. I'm trying to compile R-1.4.1 on a new Sun-Blade running Solaris 2.8 ( I got it running with no problem on older SUNs) I get the following error after doing the usual ./configure and make: gcc -I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -g -O2 -c arithmetic.c -o arithmetic.o