similar to: CentOS 5.2 with IBM SERVERAID 6i

Hi, I have just upgraded an IBM Xseries x225 server to CentOS 4.2 (from CentOS 3.6) and found out that write back cache is not enabled for the drive representing the RAID array. The RAID controller has 128 MB battery backed cache. Write back cache is enabled in the controller configuration (using the IBM boot cd) and verified using the IBM RaidManager utility, but the boot messages show that

Hi there, I'm in the process of installing Centos 5.2 on an IBM x236 w/ ServeRAID 7k I recently acquired to act as a samba file server. The hardware has all passed various stress tests I could throw at it so we're okay there. My question is. Has anyone had any luck getting the latest IBM ServeRAID Manager v9.0 working in CentOS? If so how? ServeRAID Manager is based off Adaptec's

Hi all, we are about to buy some IBM x3550 M2 servers with ServeRAID M5014 SAS onboard controller. Can anyone confirm that these controllers will work with CentOS 5.5 (seems to be some rebranded LSI controller). I cannot find any hint in the 2.6.18-194.3.1.el5 sources... Regards, Peter -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type:

Hi *, I try to install Xen 3.0.0 on a IBM x342 with a ServeRAID 4Lx controller. The box boots with "plain" 2.6.12.6 (aic7xx- and serveraid-support included). It does not with a similar configuration of 2.6.12.6-xen0. Any hints, boot options? by Töns -- There is no safe distance. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

On 3/14/19 2:31 PM, isdtor wrote: > >> I'd like to monitor the disks connected to a ServeRaid-8k controller in a >> server running Centos 7 such that I can know when one fails. >> >> What's the best way to do that? > > It's been a long time since I worked with ServeRaid, and things may have changed in the meantime. > > IBM used to have a an iso

Hi, I'd like to monitor the disks connected to a ServeRaid-8k controller in a server running Centos 7 such that I can know when one fails. What's the best way to do that?

> hwilmer wrote: >> >> I'd like to monitor the disks connected to a ServeRaid-8k controller in >> a server running Centos 7 such that I can know when one fails. >> >> What's the best way to do that? > > From a *really* short search, see it has a controller card If you do an > lspci, what does that tell you - is it yet another rebranded LSI card? If

IBM''s website says that Solaris 10u1 has them built in, Shouldn''t that mean they are in sNV too? I''m booting off the network and off DVD, and just before the installer starts I get a message about ''no disks found.'' Format does the same thing. What driver module should be used for the ServeRAID 7k. I did use the ServeRAID Support CD to define the

> I'd like to monitor the disks connected to a ServeRaid-8k controller in a > server running Centos 7 such that I can know when one fails. > > What's the best way to do that? It's been a long time since I worked with ServeRaid, and things may have changed in the meantime. IBM used to have a an iso with ServeRaid related tools (ibm_sw_srapp_.....) that included Linux

Hi, Does anyone know how I can find out if an ibm serveraid 8k sas storage controller (zero channel RAID) is a real hardware RAID controller and supported in the standard CentOs kernel or is it a fake raid controller. I am trying to decide if I should get the serveraid controller or go get a 3ware controller. Regards, -- Tom Diehl tdiehl at rogueind.com Spamtrap address mtd123 at

Hi, I do seem to have a slight problem with upgrading two of our machines to CentOS (from SuSE, but that doesn't really matter). Both systems are IBM x-Series 360 with a ServeRaid controller for the "internal" hard disks an a QLogic QLA2200 fibre channel controller for an external stack of disks. On SuSE (kernel 2.4.26) the ServeRaid is controller 0 (resulting in the internal Raid

hwilmer wrote: > > I'd like to monitor the disks connected to a ServeRaid-8k controller in > a server running Centos 7 such that I can know when one fails. > > What's the best way to do that? >From a *really* short search, see it has a controller card If you do an lspci, what does that tell you - is it yet another rebranded LSI card? If so, MegaRAID. mark

Let me be the first (maybe): CentOS 5.2 is here (at least): http://mirror.chpc.utah.edu/pub/centos/5.2/ Thank you all who worked on it! -------------- next part -------------- No virus found in this outgoing message. Checked by AVG. Version: 8.0.100 / Virus Database: 270.4.1/1513 - Release Date: 22-06-2008 7:52

Hello, I have a problem getting the domain 0 (dom0) of xen running with SuSE 10. I have a SuSE 10 installation, which runs. When I switch to the xen kernel, the network does not work any more. Also the serial console does not work any more. If I login to the PC through (a very lousy) KVM, I can do local stuff, but the network does not work. (Ok, I can ping my own IP Address.) e.g. nslookup

On Feb 3, 2016, at 17:10, Warren Young wrote: > smartctl can see through several different types of RAID controller to the underlying physical disks via its -d option. This is what I have: # smartctl --all /dev/sda smartctl 5.43 2012-06-30 r3573 [i686-linux-2.6.32-573.12.1.el6.i686] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net Vendor:

I'm struggling with trying to create a unified, ldap-backed for my home network. I have an existing directory that handles my posix logins correctly and I'm able to auth smb users against those accounts, but I'm not able to join any machines to the directory. It would be profoundly helpful to see a ldif dump of a working configuration. Surely others have created similar setups at home

I'm running a CentOS 4 and smartd fails to start on boot the centos 4 smartd service doesn't support scsi ? <mailto:denis.machard at enst-bretagne.fr> Denis -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20061128/8f430d4c/attachment-0002.html>

Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on

> Full ack! +1 > > Regards > Tim > > Am 12. Februar 2015 22:12:45 MEZ, schrieb Miguel Medalha > <miguelmedalha at sapo.pt>: >> >> I am using a Samba 4.1.16 as an Active Directory domain controller. >> >> After a lot of time complaining to myself that my users' properties >> sheet in ADUC did not contain the Unix Attributes tab, it

Greetings, I am trying to install Centos 5.3 on IBM x3650 with Adaptec based ServeRAID 8k Just two disk in RAID 1 When trying boot with CD1 the booting process aborts with a kernel panic saying that some unknown-de and some message saying to use the correct 'root=' boot parameter. Kindly help Thanks and Regards Rajagopal