similar to: Closing a multi-session disk

List, Sorry to trouble anyone, a google on my error from k3b lead me to a permissions issue, but after searching through several of the links (including a few forums) I've failed to turn up exactly what the permissions should be or if that is even an accurate solution. When running k3b I get an error stating that cdrecord did not exit properly. And k3b will not burn a cd. Running cdrecord

I have been having some strange results trying to burn CDs under CentOS. I don't think they are hardware related because I have had some success, in fact most of this usually works. I use k3b for most of my CD and DVD writing - it seems to work fairly well (well, except for wrecking my installation a few weeks ago when it crashed my installation and I had to reinstall to get it back, but

Copying a CD with k3b is no problem, except I want to include on my copy the cbbd data (from freedb.org). I've configured k3b's cddb section according to instructions at <http://www.freedb.org/en/faq.3.html#15> and read every article google could find about "k3b cddb freedb.org config", but still k3b can't manage it. Grip handles getting the cddb data just fine.

I'm trying to use DVD-RW ("minus RW") disks in my LG GSA-4040B drive. I can write a new disk just fine, but can't find any way to blank or re-use a disk. When I run xcdroast and click on the "Blank CD/DVD+-RW" button, I get "Error while blanking." Here is last part of the dialog: Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd) Driver flags

So right now I have installed k3b on this notebook. I am using my Storix DVD/CDRW usb drive. I can read cds with it. Cannot burn CDs. First k3b suggests slowing down (from 8x to 4x). Then use TAO. Then it gave up. So I try cdrecord directly. -checkdrive finds some interesting things. Got to close the drive manually; cdrecord says it can't. then try a cdrecord -v dev=dev/scd0 sample.iso

When I try to burn anything to cd, I get a message to insert a CD large enough for my file (normally an ISO image). Doesn't matter if the iso image is a 600Mb Centos ISO or a 48Mb DSL ISO. Same warning. My CD-Rs are Memorex 700MB/80min 52x disks that work just fine on XP systems. So what am I missing configuration-wise?

Hi ! (sorry for my english but I hope you understand what i mean :) ) Does CD-Record programms works with wine ? Can i use CloneCD and WinOnCD with it ? I have a windows PC only to burn CD's here and i want to do it with linux For "normal" things i can use cdrecord but i cant copy all cd's with it, sometimes i need clonecd and WinOnCD is better for CD-Text than the GUI's

On Sun, 29 Apr 2018, Thomas Schmitt wrote: > Michael Hennebry wrote: >> The last time I use it [K3B], , it crapped out after writing, >> but before finalizing. > > Sounds like a growisofs problem. > > If it was with unformatted DVD-R or DVD-RW media, does it resemble this > error ? > https://bugzilla.redhat.com/show_bug.cgi?id=810483 > > Any message from

I'm trying to recover data from an audio cd. it is a recording of a live session, made on a professional cd recorder, on the fly. apparently, instead of stopping it and fixating the disc, someone turned off the power. oops. I know that wodim will fixate a disk as long as it was otherwise properly terminated (I've done it more than once), but this one it won't fixate. depending on

I have an NEC DVD-RW ND2500A (that's not the label I bought it under, but that's what it really is.) It's supposed to read/write CDs, DVDs, DVD+Rs, and DVD-Rs. I'm basically dual booting between XP and CentOS 4. Following the recipe in "The Linux Cookbook", I tried to copy a DVD using: dd if=/dev/hdd of=/tmp/diskfile.iso then cdrecord dev=/dev/hdd fs=32m

Hi, For years that i've been recording CDs and DVDs and all well. Now, i can't in CentOS-4 First i run: # mkisofs -r -J -o cd_backup cd/ Then # cdrecord -scanbus Output is: cdrecord: Warning: controller returns wrong size for CD capabilities page. 1,0,0 100) 'SAMSUNG ' 'CD-ROM SC-148F ' 'F008' Removable CD-ROM 1,1,0 101) 'HP '

Okay, I experimented with both KDE and Gnome, and decided I'd rather use Gnome. After making this decision, I wanted to remove KDE, because I like to keep my hard drive as lean as possible. I accomplished this, or so I thought, by running: # yum groupremove "KDE (K Desktop Environment)". It seemed to work. Removed a whole bunch 'o stuff. Okay, but then I wanted to install k3B,

Hi, I have just installed 4.1 on a new Dell Latitude d610. It does not automount the CDs. When I mount the CD manually I get: $mount /media/cdrecorder mount: block device /dev/hdc is write-protected, mounting read-only The CD writer is an Philips IDE: CDRW/DVD-ROM CDD5263 Here is my mtab: $ cat /etc/mtab /dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0 none /proc proc rw 0 0 none /sys sysfs rw

I create DVDs from camcorder output. In the past I've always just dragged the AUDIO_TS and VIDEO_TS folders into k3b and the disk has burned successfully. On this new box I tried to do the same, but k3b says that it 'Found invalid entry in the VIDEO_TS folder (AUDIO_TS). That seems to be utter nonsense, if it means that AUDIO_TS is inside the folder VIDEO_TS. If it doesn't,

Hi Everyone, I downloaded the CentOS 6 x86_64 DVD ISOs and burned the first image to a rewritable DVD. When I tried to boot my new home server off it, it didn't, and then this was printed to the screen: ETCDisolinux: Found something at drive = EF No DEFAULT or UI configuration directive found! boot: The same disc works fine in my 4 year old HP laptop, and when installing CentOS 6 as a KVM.

Dear All I need to burn data cd on my CentOS and open the pdf file on my MS Windows client . My cd drive is at /dev/cdrom that is mounted as /mnt/cdrom . To this end , I issued as the following : #cdrecord -v dev=/dev/cdrom myfile But the file cannot be opened on ms MS Windows , nor the cd is usable afterwards . Can you please let me know how can I burn this data cd ? Thank you -------------- next

I have a small LAN in my basement, with my PC running RH5 Linux and a Win95 PC connected by Samba. Everything works fine, but when I smbmount a CD (burned with xcdroast) from the Linux box (CD is in the Win95 machine) I do not get the proper filenames. All files are uppercase, and the TRANS.TBL files appear to be ignored. I have tried playing with name mangling, but it didn't help. Is this a

Hi I am having problems labelling a lightscribe disc in a Lacie USB2.0 interface CD/DVDW. I am running CENTOS 5.0 I can read and write cds and DVDs including DLs without any problems. Both xcdroast and k3b detect the unit as TSSTcorp-CD/DVDW SH-S162L Lacie's 4L software unfortunately doesn't detect any unit with either the gui interface or the cli interface. I loaded Lacie's

Hi all; I downloaded the centos 4.3 image onto my linux box and used k3b to burn a DVD iso image. It seemed to work fine. I have an SuSE laptop and I want to setup a CentOS VM via Vmware 5.5 If I insert the dvd and boot the new vm I get 'no operating system found' It seems to be a non-bootable dvd. Is there something additional I need to do when burning the dvd image to make it

I am running CentOS 5/2 (latest updates) with the GNOME DE on a 32-bit machine (at work). I have k3b installed, and I was trying to copy a DVD earlier this morning, but k3b said it couldn't read encrypted DVDs. So, I installed libdvdcss from rpmforge and restarted k3b. It hung the system. I rebooted, and / had been damaged. After running e2fsck from the repair prompt, I rebooted and a