similar to: rtl8169 kernel dump

I am trying to install 5.2 on a new dv7z hp laptop. I use "linux noapic nolapic iommu=off " and I get a kernel dump on rtl8169. I dont need the network to install? how do I ignore the rtl8169 to install. I tried noprobe and then it doesnt recognize my SATA HD controller and I dont know yet which driver to select as I cant do an lspci to see??? THanks, Jerry

Hi list, I'm planning to buy a mobo (z170-K) that has Realtek 8111GR (nic). I've tried to search on google about support on C7 but can't fine anything. There is a way to check if supported? Is the Realtek 8111GR supported or I must change mobo? Thanks in advance.

Realtek is "real" good about getting drivers for their chips into the kernels as soon as possible. They are one of the few vendors that I have never had a problem with built in support... Mike McCarthy On 06/03/2016 08:03 AM, Phil Manuel wrote: > You can get the Linux driver from >

Seems like overnight every motherboard that worked with linux has DROPPED off the face of the earth. Every motherboard I looked at is using the realtek 8111 chipset and a northbridge that is not supported. Example: GIGABYTE GA-970A-DS3, does not work with linux I tried disabling the onboard NIC and using a PCI-E intel card I always use and that would not work either. The north or south bridge

Executive Summary: Realtek has an r1000 driver for the rtl8110sc NIC at http://www.realtek.com.tw/downloads I've posted this in the forums but it looks like all the action for CentOS really happens here on the mailing list. Plus I hope this might help some other lost soul since google failed to connect this motherboard to *any* mention of the r1000. I thought I found a great little

Motherboard - Intel DG41TY Device: RealTek: 8111D Driver: RTL8169 Causes Kernel panic during install and boot. -- It seems that the newer the card that uses this driver, the worse the problems are. Is there any plan to roll a newer version into the installer or the actual distribution itself? Thanks, -Drew -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list 6 centos I wish you a very good year for this festive period I am writing to report a problem I encounter with my wireless card realtek 8150 the installer does not detect the device so the /etc/sysconfig/network-script/ifcfg-wlan0 is absent I can not find the driver for the deposit elrepo No I have in any case managed to detect my peripheique by the system Despite my many attempts

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

Le Lun 2 mars 2009 23:39, Jason Pyeron a ?crit : > Can this MB be used with Centos 4 (or 5)? > > For reference: > http://www.logicsupply.com/products/ms_9832 > > > I don't think we can use this new MB since the Realtek 8111C does not seem > to be > supported (well) > > http://forums.tweaktown.com/f69/8111c-nic-revision-ep45-27089- >

Hi. I have 2 PC's connected with 1GBit NIC's. When I transfer a file from my File-Server(Redhat9.0, 256 SD-RAM, 300MHz PII, RTL8169 NIC, 2x Western Digital WD200JB RAID 0) to my Windows-PC(AMD Athlon XP 1800+, 1024 MB DDR-RAM, WINXP PRO, RTL8169 NIC, 2x Western Digital WD080JB RAID 0) with Samba, i get Speeds around 8-9MB/sec. I think this is too low for an GBit Network, so i tested the

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

You can get the Linux driver from http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=5&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#RTL8111B/RTL8168B/RTL8111/RTL8168%3Cbr%3ERTL8111C/RTL8111CP/RTL8111D%28L%29%3Cbr%3ERTL8168C/RTL8111DP if you can't find it under C7 Regards On Fri, Jun 3, 2016 at 8:11 PM, Alessandro Baggi <alessandro.baggi at

And my last post on the matter. This is why I won't do business with USR again anytime soon. They couldn't even be bothered to tell me this on my first query to them. Eric Hines >X-Originating-IP: [63.169.70.144] >Date: Tue, 20 Dec 2005 18:44:48 -0500 >From: usr_amr_eng@aqinc.com >Subject: In response to your USRobotics technical support questions, >your case

Hi, One of my servers in a IDC in another country mysteriously went down this morning, and when I contacted the IDC, I was told that XEN doesn't boot up, as follows: [QUOTE] This is error message on the screen " Error 19: Linux Kernel must be loaded before initrd" Server is currently up with 2nd kernel. Please check the grub.conf. [/QUOTE] Looking at grub.conf, I see the

I'm trying to get my network setup as streamlined as possible. I ran a brain-dead-simple speed test of Samba and I'm very confused by the results. Here's my setup: Fast new WinXP Pro machine NetGear GA311 gigabit ethernet ^ | dedicated gigabit ethernet line (no switch) v RTL8169 gigabit ethernet Relatively fast new Debian Linux machine I set up ramdisks on both

Hi, First, let me thank you for the excellent documentation and programming work on Syslinux. It has made getting to this point infinitely easier. Unfortunately, I need to request some guidance in troubleshooting a problem I am having using the RedHat installer on their version 7.3, which uses Syslinux as the boot mechanism. A little background: I have an old Micron Powerdigm XsU dual PII

is it possible to crete a domu without network support hello users, Myself Dharma, new to xen,              i am trying to create a domu .I have realtek 8168SC gigabit ethernet card which is not supported by xen.it has support for rtl8169 only. is it possible to create domu without network support while i am trying to create it getting error :2049 device not found hotplug scripts missing Any

Hi, One of my servers in a IDC in another country mysteriously went down this morning, and when I contacted the IDC, I was told that XEN doesn''t boot up, as follows: [QUOTE] This is error message on the screen " Error 19: Linux Kernel must be loaded before initrd" Server is currently up with 2nd kernel. Please check the grub.conf. [/QUOTE] Looking at grub.conf, I see the

On Sat, 22 Nov 2003 20:57:44 +0530 (GMT+05:30) anand@eis.iisc.ernet.in (SVR Anand) wrote: > Hi, > > I am one of the system administrators who manage a campus network of 5000 users > that is connected to Internet. We have placed a Linux bridge to isolate the > Internet from the campus. To nullify network flooding effect, we have used > iptables. The kernel is 2.6.0-test9, the

Hi all, I try to install CentOS 4.3 for X64_64 on a new Dell PowerEdge 2950. I have two problems: 1. After booting from CD I pressed 'return' to start installation (BIOS-support for USB-keyboard works). After probing the hardware my USB-Keyboard is not working anymore. Dell removed ALL PS/2-Interfaces so I have to use USB. When I start installation with 'linux noprobe' the